Built for high-pressure hose retrieval in shops, service trucks, fleet maintenance skids, and industrial fluid handling areas, the Coxreels HP1125-5-200-AB uses a #6 Gast compressed air motor to manage up to 200 ft of 3/4" I.D. hose at a 4500 PSI maximum pressure rating. The air motor rewind configuration helps reduce manual winding effort on long, heavy hose assemblies while avoiding the need for electric rewind wiring.
Part of the HP1125 Series, this high-pressure motorized reel uses Coxreels' one-piece welded steel 'A' frame, low profile outlet riser, and open drum slot design to support a flatter hose wrap with reduced crimping. The external fluid path, electroless nickel plated steel 90° full-flow NPT swivel, and AFLAS swivel seals are intended for compatible high-pressure oil, grease, hydraulic, lubrication, and fluid service when paired with the correct hose and fittings. This model is supplied less hose, allowing the buyer to install a hose assembly matched to the application, pressure, fluid, temperature, bend radius, and fitting requirements.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Compressed Air Motor Rewind Hose Reel | Series: HP1125 Series | Motor: #6 Gast Air Motor | Configuration: Less Hose | Hose I.D.: 3/4" | Hose O.D.: 1-1/4" | Hose Capacity: 200 ft | Max Pressure: 4500 PSI | Hose Included: No | Swivel Seals: AFLAS | Ship Weight: 63 lbs | Overall Dimensions: 35.38" W x 18.75" H x 17.63" L | Mounting Pattern: 27.44" M x 10" N | Base: 29.38" X x 16" Y
Features:
- Compressed air #6 Gast motor rewind provides powered hose retrieval where pneumatic power is preferred or already available.
- HP1125 Series construction supports high-pressure applications up to 4500 PSI.
- External fluid path with electroless nickel plated steel 90° full-flow NPT swivel inlet supports high-pressure flow through the reel.
- AFLAS swivel seals are used on HP1125 Series reels for compatible high-pressure fluid service.
- Reliable direct gear drive on motor driven models provides quiet, smooth retraction without a chain drive.
- One-piece all welded steel 'A' frame construction provides a rigid mounting base for trucks, skids, floors, benches, or fixed equipment.
- Exclusive low profile outlet riser and open drum slot design helps create a flat, smooth hose wrap with reduced hose crimping.
- Permanently lubricated self-aligning pillow block bearings promote smooth drum rotation with reduced routine bearing service.
Made in USA: 
Applications:
- Mobile hydraulic service trucks using compressed air to retract long high-pressure hose runs after field repair work.
- Fleet and heavy equipment maintenance bays handling grease, hydraulic oil, lubrication, or compatible high-pressure fluid hose assemblies.
- Industrial MRO stations where powered rewind helps keep 3/4" hose controlled, stored, and off the floor between service tasks.
- Construction, agriculture, and utility service skids where an air motor reel can operate from an existing pneumatic supply.
- Manufacturing and fabrication facilities using high-pressure hose reels for fixed or semi-mobile fluid delivery setups.
FAQs:
- Q: What does 'less hose' mean on the HP1125-5-200-AB?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 3/4" I.D. hose rated for the pressure, fluid type, fittings, temperature, bend radius, and operating environment. - Q: What does the 'AB' motor option indicate?
A: For this listing, the 'AB' configuration refers to a compressed air #6 Gast motor rewind option. The reel uses pneumatic power to retract the hose instead of a manual crank, electric motor, or hydraulic motor. - Q: How is this different from the HP1125-5-200-A?
A: Both are HP1125 Series high-pressure air motor rewind reels with the same 3/4" I.D., 200 ft, and 4500 PSI capacity. The difference is the air motor option: this AB model is listed with a #6 Gast motor, while the A model is listed with a #4 Gast motor. - Q: Can this reel be used for hydraulic oil or grease service?
A: Yes, this model is commonly selected for high-pressure grease, hydraulic oil, lubrication, and compatible fluid service. The complete hose assembly, fittings, seal compatibility, temperature range, and working pressure must also match the application. - Q: How much hose will this reel hold?
A: This model is listed for 200 ft of 3/4" I.D. hose with a 1-1/4" hose O.D. Hose outside diameter affects reel capacity, so using hose larger than the listed O.D. may reduce the amount that fits on the drum.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-5-200 | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200 | 4,500 | 55 | 9 |
| 1125-5-200-A | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-A | 4,500 | 55 | 9 |
| 1125-5-200-AB | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-AB | 4,500 | 55 | 9 |
| 1125-5-200-C | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-C | 4,500 | 55 | 9 |
| 1125-5-200-E | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-E | 4,500 | 55 | 9 |
| 1125-5-200-EA | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EA | 4,500 | 55 | 9 |
| 1125-5-200-EB | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EB | 4,500 | 55 | 9 |
| 1125-5-200-ED | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-ED | 4,500 | 55 | 9 |
| 1125-5-200-EF | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-EF | 4,500 | 55 | 9 |
| 1125-5-200-H | 3/4" | 1 1/4" | 200 | 1/2" | 7/8" | 450 | 3/4" F NPT | 3,000 | HP1125-5-200-H | 4,500 | 55 | 9 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
