When a long high-pressure hose run needs powered rewind from a 12V DC system, the Coxreels HP1125-4-500-ED provides a motorized reel solution for service trucks, mobile equipment, washdown systems, jetting setups, and maintenance operations. This HP1125 Series reel is built for 1/2" I.D. hose with up to 500 ft hose capacity and a 5000 PSI maximum pressure rating, giving crews the reach and pressure capability needed for demanding high-pressure service. The 12V DC explosion proof 1/2 HP electric motor supports powered rewind where the specified DC motor configuration is required, helping reduce the effort of retrieving long hose lengths after use.
The HP1125-4-500-ED uses Coxreels' one-piece welded steel 'A' frame, low profile outlet riser, and open drum slot design to help create a flat, smooth hose wrap while reducing hose crimping. Its direct gear drive rewind eliminates chain drive components, while the electroless nickel plated steel 90° full-flow NPT swivel inlet, AFLAS swivel seals, and permanently lubricated self-aligning pillow block bearings support smooth rotation and high-pressure fluid handling in properly matched systems.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Electric Motor Rewind Hose Reel | Series: HP1125 Series | Model: HP1125-4-500-ED | Configuration: Less Hose | Motor: 12V DC Explosion Proof 1/2 HP Electric Motor | Hose I.D.: 1/2" | Hose O.D.: 7/8" | Hose Capacity: 500 ft | Hose Included: No | Max Pressure: 5000 PSI | Ship Weight: 84 lbs | Overall Dimensions: 41.75" W x 19.25" H x 17.63" L | Mounting Pattern: 31.44" M x 10" N | Base: 33.38" X x 16" Y | Swivel: 90° full-flow NPT swivel inlet | Swivel Seals: AFLAS
Features:
- 12V DC explosion proof electric motor rewind supports powered hose retrieval where the specified motor configuration is required.
- Reliable direct gear drive provides smooth, quiet retraction without a chain drive.
- All welded steel 'A' frame construction supports the reel under long hose storage and repeated high-pressure service.
- Exclusive low profile outlet riser and open drum slot design help guide hose into a flat, non-crimping wrap.
- External fluid path with electroless nickel plated steel 90° full-flow NPT swivel inlet supports high-pressure flow through the reel.
- AFLAS swivel seals are used in the high-pressure swivel assembly.
- Permanently lubricated self-aligning pillow block bearings help maintain smooth reel rotation with reduced routine bearing service.
- Adjustable tension brake helps control drum movement and prevent free-wheeling during hose payout or rewind.
- CNC robotically spun and ribbed discs with rolled edges add hose protection and safer handling around the reel drum.
- CPC powder coat finish helps resist chips and corrosion in shop, plant, fleet, and mobile service environments.
Made in USA: 
Applications:
- Mobile service equipment: Managing high-pressure hose on trucks, trailers, or skids where a 12V DC rewind system is specified.
- Pressure washing and washdown: Storing long hose runs used for cleaning machinery, vehicles, shop floors, and equipment yards.
- Grease and hydraulic maintenance: Organizing compatible high-pressure hose used for lubrication, hydraulic service, and fluid transfer tasks.
- Industrial MRO: Helping maintenance teams keep 500 ft hose lengths controlled, protected, and off busy work surfaces.
- Jetting and high-pressure cleaning systems: Supporting long-reach hose handling when pressure rating, hose size, and media compatibility match the system requirements.
FAQs:
- Q: Does the HP1125-4-500-ED come with hose installed?
A: No. This model is sold less hose, so the reel is supplied without hose. Select a compatible 1/2" I.D. hose separately and verify pressure rating, outside diameter, fittings, and media compatibility before installation. - Q: What does the ED motor option mean?
A: The ED suffix identifies the 12V DC explosion proof 1/2 HP electric motor configuration. Confirm the available power source and the required installation classification before using the reel in any regulated or hazardous-location environment. - Q: Is this reel suitable for 5000 PSI service?
A: Yes. The reel is rated for 5000 PSI maximum pressure. The hose, fittings, swivel connections, and fluid system must also be selected and rated for the intended pressure and media. - Q: How much 1/2" hose can this reel hold?
A: The HP1125-4-500-ED holds up to 500 ft of 1/2" I.D. hose with a 7/8" O.D. If the hose outside diameter is larger, the actual reel capacity may be reduced. - Q: What should be checked before mounting this reel?
A: Confirm the mounting pattern, base dimensions, hose pull direction, available clearance, and structural support. The mounting surface must support the reel, hose weight, and operating loads during payout and rewind.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-4-500 | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500 | 5,000 | 58 | 5 |
| 1125-4-500-A | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-A | 5,000 | 58 | 5 |
| 1125-4-500-AB | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-AB | 5,000 | 58 | 5 |
| 1125-4-500-C | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-C | 5,000 | 58 | 5 |
| 1125-4-500-E | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-E | 5,000 | 58 | 5 |
| 1125-4-500-EA | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-EA | 5,000 | 58 | 5 |
| 1125-4-500-EB | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-EB | 5,000 | 58 | 5 |
| 1125-4-500-ED | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-ED | 5,000 | 58 | 5 |
| 1125-4-500-EF | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-EF | 5,000 | 58 | 5 |
| 1125-4-500-H | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-H | 5,000 | 58 | 5 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
- Type
- Motorized Hose Reel
- Series
- HP1125 Series
- Hose Inside Diameter (in.)
- 1/2
- Hose Outside Diameter (in.)
- 7/8
- Hose Length (ft.)
- 500
- Hose Included
- No
- Maximum Working Pressure (PSI)
- 5000
This product hasn't received any reviews yet. Be the first to review this product!