When high-pressure hose must be retrieved over long distances without manual cranking, the Coxreels HP1125-4-500-A provides compressed-air motor rewind for demanding hose storage and fluid handling setups. This HP1125 Series reel is sized for 1/2" I.D. hose up to 500 ft and rated for 5,000 PSI maximum pressure, giving maintenance teams the reach needed for pressure washing, grease and hydraulic service, washdown, spraying, jetting, and water applications where hose control and safe storage are part of the job.
The 'A' configuration uses a compressed air #4 Gast motor rewind, which uses shop air to power hose retrieval when electrical or hydraulic rewind is not preferred. The HP1125 frame combines Coxreels' one-piece welded steel 'A' frame base, low-profile outlet riser, open drum slot design, and direct gear drive to help produce smooth, controlled rewind with no chain drive. Because this reel is supplied less hose, the buyer can select hose construction, end fittings, and fluid compatibility to match the pressure system being installed.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Compressed Air Motor Rewind Hose Reel | Series: HP1125 Series | Model: HP1125-4-500-A | Configuration: Less Hose | Rewind Type: Compressed Air #4 Gast Motor | Hose I.D.: 1/2" | Hose O.D.: 7/8" | Hose Capacity: 500 ft | Hose Included: No | Max Pressure: 5,000 PSI | Swivel: External 90° Full-Flow NPT Swivel with Electroless Nickel Plated Steel Inlet | Swivel Seals: AFLAS | Ship Weight: 66 lbs | Overall Dimensions: 39" W x 18.75" H x 17.63" L | Mounting Pattern: 31.44" M x 10" N | Base: 33.38" X x 16" Y
Features:
- Compressed air #4 Gast motor rewind retrieves long hose runs using shop air, reducing the effort required compared with hand crank operation.
- High-pressure HP1125 Series construction supports applications up to 5,000 PSI when paired with compatible hose, fittings, and system components.
- Reliable direct gear drive on motor driven models provides quiet, smooth retraction with no chain drive.
- External fluid path with electroless nickel plated steel 90° full-flow NPT swivel inlet supports hose movement while maintaining the flow path through the reel.
- AFLAS swivel seals are supplied for high-pressure HP1125 Series service.
- All welded steel 'A' frame construction provides a rigid mounting base for truck, skid, wall, bench, and floor installations where supported by the mounting layout.
- Exclusive low-profile outlet riser and open drum slot design help produce a flat, smooth hose wrap and reduce hose crimping during rewind.
- Permanently lubricated self-aligning pillow block bearings support smooth drum rotation during payout and motorized retrieval.
- Adjustable tension brake helps prevent free-wheeling during operation.
- Rolled edges and ribbed discs add strength while helping protect the hose during handling and rewind.
Made in USA: 
Applications:
- Pressure washing systems where 500 ft of hose reach and powered rewind help reduce retrieval time after cleaning work.
- Grease and hydraulic service installations using compatible 1/2" hose, high-pressure fittings, and fluid-specific hose construction.
- Industrial MRO and plant maintenance stations where compressed air is available and electric rewind is not the preferred power source.
- Fleet, utility, and service truck builds that require long hose storage, powered retraction, and a less-hose reel for custom hose selection.
- Jetting, spraying, washdown, and water service applications when the hose, fittings, temperature, and fluid compatibility are verified before installation.
FAQs:
- Q: What does the 'A' suffix mean on HP1125-4-500-A?
A: The 'A' suffix identifies this model as a compressed air motor rewind reel. The title specifies a #4 Gast motor, which uses compressed air to power hose retrieval. - Q: Does this reel include hose?
A: No. This is a less-hose reel, so hose must be purchased separately. Match the hose to the reel capacity, 5,000 PSI pressure rating, fittings, fluid, temperature, and application requirements. - Q: What hose size fits this model?
A: The HP1125-4-500-A is listed for 500 ft of 1/2" I.D. hose with 7/8" O.D. Hose capacity depends on both inside diameter and outside diameter, so confirm O.D. before selecting a replacement or custom hose. - Q: Why choose compressed air motor rewind instead of hand crank rewind?
A: Air motor rewind is useful when long hose lengths need to be retrieved frequently and compressed air is already available. It reduces manual cranking effort and avoids the need for an electric or hydraulic rewind system. - Q: Can this reel be used for pressure washing or hydraulic service?
A: Yes, when the hose, fittings, swivel compatibility, fluid, temperature, and working pressure are suitable for the complete system. The reel is rated up to 5,000 PSI, but the lowest-rated component in the system determines safe working pressure.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-4-500 | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500 | 5,000 | 58 | 5 |
| 1125-4-500-A | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-A | 5,000 | 58 | 5 |
| 1125-4-500-AB | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-AB | 5,000 | 58 | 5 |
| 1125-4-500-C | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-C | 5,000 | 58 | 5 |
| 1125-4-500-E | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-E | 5,000 | 58 | 5 |
| 1125-4-500-EA | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-EA | 5,000 | 58 | 5 |
| 1125-4-500-EB | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-EB | 5,000 | 58 | 5 |
| 1125-4-500-ED | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-ED | 5,000 | 58 | 5 |
| 1125-4-500-EF | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-EF | 5,000 | 58 | 5 |
| 1125-4-500-H | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-H | 5,000 | 58 | 5 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
