When high-pressure hose needs to be managed without hand cranking, the Coxreels HP1125-4-500-EA provides motorized rewind for long hose runs in pressure wash, washdown, grease, hydraulic, and fluid transfer applications. This HP1125 Series reel is built for 1/2" I.D. hose with a 500 ft hose capacity and a 5000 PSI maximum pressure rating, giving buyers the reach and pressure capacity needed for high-pressure service where shorter shop reels are not enough. The 115V AC explosion proof 1/2 HP electric motor supports powered rewind in applications requiring the specified motor configuration, while the open drum slot and low-profile outlet riser help guide a flat, non-crimping hose wrap during retraction.
The HP1125-4-500-EA uses Coxreels' welded steel 'A' frame construction, electroless nickel plated steel 90° full-flow NPT swivel inlet, AFLAS swivel seals, and permanently lubricated self-aligning pillow block bearings to support smooth reel rotation under repeated use. Its adjustable tension brake helps prevent free-wheeling during operation, and the direct gear drive motor rewind eliminates chain drive maintenance points while delivering smooth, controlled hose retrieval.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Electric Motor Rewind Hose Reel | Series: HP1125 Series | Model: HP1125-4-500-EA | Configuration: Less Hose | Motor: 115V AC Explosion Proof 1/2 HP Electric Motor | Hose I.D.: 1/2" | Hose O.D.: 7/8" | Hose Capacity: 500 ft | Hose Included: No | Max Pressure: 5000 PSI | Ship Weight: 84 lbs | Overall Dimensions: 41.75" W x 19.25" H x 17.63" L | Mounting Pattern: 31.44" M x 10" N | Base: 33.38" X x 16" Y | Swivel: 90° full-flow NPT swivel inlet | Swivel Seals: AFLAS
Features:
- Motorized rewind helps retrieve long high-pressure hose runs with less manual effort than hand crank operation.
- Reliable direct gear drive provides smooth, quiet retraction without a chain drive.
- All welded steel 'A' frame construction supports the reel during high-capacity hose storage and repeated shop or field use.
- Exclusive low profile outlet riser and open drum slot design help produce a flat, smooth hose wrap while reducing hose crimping concerns.
- Electroless nickel plated steel 90° full-flow NPT swivel inlet supports high-pressure fluid flow through the reel.
- AFLAS swivel seals are used in the reel's high-pressure swivel assembly.
- Permanently lubricated self-aligning pillow block bearings support smooth rotation and reduce routine bearing service needs.
- Adjustable tension brake helps control drum rotation and prevent free-wheeling during operation.
- Rolled edges and ribbed discs add hose protection and operator safety around the reel drum.
- CPC powder coat finish helps resist chips and corrosion in industrial environments.
Made in USA: 
Applications:
- Pressure washing and washdown: Managing long high-pressure hose runs for cleaning equipment, floors, vehicles, and service areas.
- Grease and hydraulic service: Storing compatible 1/2" I.D. hose used in high-pressure lubrication or hydraulic fluid transfer setups.
- Industrial MRO: Supporting maintenance crews that need long hose reach from a fixed reel location without manual rewind.
- Fleet and utility shops: Keeping high-pressure hose organized around service bays, mobile maintenance areas, and equipment wash stations.
- Water jetting and high-pressure cleaning systems: Holding up to 500 ft of compatible hose where pressure rating and hose capacity are primary selection factors.
FAQs:
- Q: What does 'less hose' mean on the HP1125-4-500-EA?
A: 'Less hose' means the reel is supplied without hose installed. The buyer must provide compatible 1/2" I.D. hose separately and verify that the hose pressure rating, outside diameter, and media compatibility match the application. - Q: What hose size does this Coxreels model hold?
A: This reel is sized for 1/2" I.D. hose with a 7/8" O.D. and a maximum hose capacity of 500 ft. Using hose with a larger outside diameter can reduce the usable hose length on the drum. - Q: Is this reel for high-pressure applications?
A: Yes. The HP1125-4-500-EA is rated for a maximum pressure of 5000 PSI, making it suited to properly matched high-pressure hose systems such as pressure washing, washdown, grease, hydraulic, and selected fluid transfer applications. - Q: What does the 'EA' motor option indicate?
A: The 'EA' suffix identifies the electric 115V AC, 1/2 HP explosion proof reversible motor option. Confirm electrical requirements and any site-specific hazardous-location classification before installation. - Q: Can this reel be mounted in a service truck or shop bay?
A: Yes, when the mounting surface can support the reel, hose weight, and operating loads. Use the listed mounting pattern and base dimensions to plan installation clearance before ordering.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-4-500 | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500 | 5,000 | 58 | 5 |
| 1125-4-500-A | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-A | 5,000 | 58 | 5 |
| 1125-4-500-AB | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-AB | 5,000 | 58 | 5 |
| 1125-4-500-C | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-C | 5,000 | 58 | 5 |
| 1125-4-500-E | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-E | 5,000 | 58 | 5 |
| 1125-4-500-EA | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-EA | 5,000 | 58 | 5 |
| 1125-4-500-EB | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-EB | 5,000 | 58 | 5 |
| 1125-4-500-ED | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-ED | 5,000 | 58 | 5 |
| 1125-4-500-EF | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-EF | 5,000 | 58 | 5 |
| 1125-4-500-H | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-H | 5,000 | 58 | 5 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
- Type
- Motorized Hose Reel
- Series
- HP1125 Series
- Hose Inside Diameter (in.)
- 1/2
- Hose Outside Diameter (in.)
- 7/8
- Hose Length (ft.)
- 500
- Hose Included
- No
- Maximum Working Pressure (PSI)
- 5000
This product hasn't received any reviews yet. Be the first to review this product!