When long hose lengths need powered rewind without relying on an electric motor, the Coxreels 1125-4-500-A compressed air motor rewind hose reel gives maintenance crews, service trucks, and equipment builders a reel-only platform for high-capacity hose management. This 1125 Series model is built for 1/2" hose I.D. with up to 500 ft hose capacity, making it useful for large work areas where hose must reach across bays, yards, wash stations, or mobile service zones. The 3000 PSI maximum pressure rating supports medium-pressure fluid handling when the installed hose, fittings, and system components are properly matched.
The #4 Gast compressed air motor rewind uses pneumatic power to retrieve hose, reducing manual effort on long hose runs and fitting well into facilities or mobile equipment that already have compressed air available. Coxreels' direct gear drive motorized design eliminates chain drive components, while the welded steel 'A' frame, low-profile outlet riser, and open drum slot help the hose wind flat and smooth for cleaner storage between jobs.
*Note: The above product image is for illustration purposes only. This product is a reel and does not include any hose. Please note this before ordering.
Type: Motorized Hose Reel | Series: 1125 Series | Configuration: Less Hose | Rewind Type: Compressed Air #4 Gast Motor | Hose I.D.: 1/2" | Hose O.D.: 7/8" | Hose Capacity: 500 ft | Max Pressure: 3000 PSI | Hose Included: No | Swivel: Machined Solid Brass 90° Full-Flow NPT | Swivel Seal: Nitrile | Ship Weight: 66 lbs
Features:
- Compressed air motor rewind retrieves long hose lengths using pneumatic power, helping reduce manual crank time on 500 ft hose setups.
- Reliable direct gear drive on motor driven models provides quiet, smooth retraction with no chain drive.
- Machined solid brass 90° full-flow NPT swivel supports simple seal maintenance and fast hose installation without removing the reel from its mount.
- All welded steel 'A' frame construction provides a strong one-piece base for stationary, vehicle-mounted, skid-mounted, or bench-mounted installations.
- Exclusive low-profile outlet riser and open drum slot design help create a flat, smooth, non-crimping hose wrap.
- Permanently lubricated self-aligning pillow block bearings support smooth reel rotation during payout and rewind.
- Adjustable tension brake helps prevent free-wheeling during use.
- Long-handled locking pin secures the reel from rotation during transport or storage.
- Rolled edges and ribbed discs add strength while helping protect the hose during winding.
- Chip-resistant and rust-inhibiting CPC powder coat finish helps protect the reel in shop, fleet, and field environments.
Made in USA: 
Applications:
- Plant maintenance and MRO areas where long hose runs need organized storage and compressed air is already available for reel operation.
- Mobile service trucks and equipment skids that require powered rewind without specifying an electric rewind motor.
- Pressure washing, washdown, and fluid transfer setups using hose, fittings, and seals compatible with the media being handled.
- Oil and lubrication service areas where medium-pressure hose storage is needed for controlled payout and retrieval.
- Pest control, spraying operations, hydro seeding, and similar service applications when the complete hose assembly is matched to the pressure and chemical requirements.
FAQs:
- Q: What does 'less hose' mean for the Coxreels 1125-4-500-A?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 1/2" I.D. hose separately and confirm that the hose outside diameter, fittings, pressure rating, and media compatibility match the application. - Q: What does the 'A' suffix indicate on this model?
A: The 'A' suffix identifies this model as a compressed air motor rewind reel. This version uses a #4 Gast air motor for powered hose retrieval instead of a hand crank, electric motor, or hydraulic motor. - Q: Can this reel be used for 3000 PSI service?
A: The reel is rated for a maximum pressure of 3000 PSI. The complete system must also use hose, fittings, couplings, and seals rated for the operating pressure and fluid being transferred. - Q: Is this reel supplied with a hose guide or hose stop?
A: The supplied data confirms the reel configuration and hose capacity but does not confirm included hose guide or hose stop accessories. Confirm accessory requirements before publishing or ordering if the installation needs guided payout. - Q: When should I choose compressed air rewind instead of electric rewind?
A: Compressed air rewind is useful where plant air or onboard compressed air is already available and the buyer wants pneumatic-powered hose retrieval. Electric rewind may be a better fit where electrical power is preferred and the voltage, phase, and control requirements are already specified.
| LESS HOSE | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | SKU | HP PSI | APRX. LBS. |
SIZE INDEX |
||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||||
| 1125-4-500 | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500 | 5,000 | 58 | 5 |
| 1125-4-500-A | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-A | 5,000 | 58 | 5 |
| 1125-4-500-AB | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-AB | 5,000 | 58 | 5 |
| 1125-4-500-C | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-C | 5,000 | 58 | 5 |
| 1125-4-500-E | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-E | 5,000 | 58 | 5 |
| 1125-4-500-EA | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-EA | 5,000 | 58 | 5 |
| 1125-4-500-EB | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-EB | 5,000 | 58 | 5 |
| 1125-4-500-ED | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-ED | 5,000 | 58 | 5 |
| 1125-4-500-EF | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-EF | 5,000 | 58 | 5 |
| 1125-4-500-H | 1/2" | 7/8" | 500 | 3/8" | 3/4" | 700 | 1/2" F NPT | 3,000 | HP1125-4-500-H | 5,000 | 58 | 5 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
