Coxreels 1125PCL-8-EF Electric 24V DC 1/3HP Motor Rewind Cord Reel | 1125PCL Series | 200' (10/3) / 175' (8/3) Capacity | 30 Amps | 600 Volts | Less Cord

When long runs of portable power cord need controlled storage and powered retrieval, the Coxreels 1125PCL-8-EF gives maintenance crews, service vehicle builders, and facility teams a motorized cord reel built around the 1125PCL Series frame. This model uses a 24V DC, 1/3 HP reversible motor to rewind cord without hand cranking, helping reduce handling time on long electrical cord runs. The reel is rated for 600 volts with a 30 amp, 3-pole slip ring assembly, allowing electrical continuity through the rotating drum when matched to the correct cord and application requirements.

The 1125PCL-8-EF stores up to 200 ft of 10/3 SOOW cord or 175 ft of 8/3 SEOOW cord, giving buyers flexibility when selecting cord gauge for the load, voltage drop, and jobsite distance. Its drum-located slip ring assembly provides service access from the reel, while the welded steel 'A' frame, adjustable tension brake, cable keeper, and long-handled locking pin support secure storage and controlled payout in shops, plants, utility vehicles, and mobile equipment builds.

*Note: This Coxreels model is supplied less cord. Power cord must be selected and installed separately based on the electrical load, cord gauge, insulation rating, service type, and applicable local or national electrical codes.

Type: Motor Rewind Cord Reel | Series: 1125PCL Series | Model: 1125PCL-8-EF | Configuration: Less Cord | Motor: 24V DC, 1/3 HP, Reversible | Cord Capacity: 200 ft of 10/3 SOOW or 175 ft of 8/3 SEOOW | Cord Grip Range: .63"-.75" | Voltage Rating: 600V | Slip Ring Amps: 30 Amps | Slip Ring Poles: 3 | Approx. Ship Weight: 48 lbs

Features:

• Motorized rewind with 24V DC, 1/3 HP reversible motor reduces manual cord handling on long cord runs.
• Drum-located slip ring assembly with easy-access cover supports routine inspection and maintenance without removing the reel from service.
• 30 amp, 600 volt, 3-pole slip ring configuration supports compatible 3-conductor power cord applications.
• All welded steel 'A' frame construction strengthens the reel structure for fixed mounting in shops, facilities, and mobile service environments.
• Narrow reel width helps fit the reel into restricted mounting spaces where broader cord storage systems may interfere with equipment or vehicle layouts.
• Permanently lubricated, self-aligning pillow block bearings help the drum rotate smoothly during payout and rewind.
• Cable Keeper helps prevent the lead cable from whipping or twisting during reel operation.
• Adjustable tension brake helps control free-wheeling, while the long-handled locking pin secures the reel during transport or storage.

Made in USA:

2 Year Warranty

• Manufacturing plants and facilities - managing long portable power cord runs for equipment, tools, work lights, and temporary electrical access points.
• Service, mechanic, and utility vehicles - storing cord neatly on trucks and mobile rigs where powered rewind helps speed setup and cleanup.
• General industrial maintenance - keeping electrical cord off floors and organized around maintenance bays, repair stations, and plant work areas.
• Construction, mining, and railroad operations - supporting controlled cord storage where long cord lengths are needed in rugged field environments.
• Shop and garage installations - providing fixed cord storage for users who need high-capacity reel management and will select the proper cord separately.

FAQs:

• Q: Does the Coxreels 1125PCL-8-EF include cord?
  A: No. This reel is supplied less cord, meaning the buyer must provide and install compatible cord separately. The reel is rated for up to 200 ft of 10/3 SOOW cord or 175 ft of 8/3 SEOOW cord.
• Q: What does the slip ring do on a motorized cord reel?
  A: The slip ring assembly allows electrical current to pass through the rotating drum while the cord is being stored or paid out. This model uses a 30 amp, 600 volt, 3-pole slip ring assembly.
• Q: Can this reel be used while the cord remains wound on the drum?
  A: Coxreels cautions that cord should be completely unspooled when energized unless proper ampacity derating is applied. Cord gauge, length, insulation rating, number of conductors, reel layers, and electrical code requirements must all be considered before use.
• Q: What is the difference between 1125PCL-8-EF and 1125PCL-8-E?
  A: Both are motorized 30 amp, 600 volt 1125PCL-8 cord reels, but the EF suffix specifies a 24V DC, 1/3 HP reversible motor. The E suffix specifies a 12V DC, 1/3 HP reversible motor.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com