Cleco CCBPW123 CellCore Cordless Electric Pneumatic Nutrunner | 800 RPM | 2.7 - 8.8 (ft-lbs) Torque Range

Built for controlled fastening in assembly cells, rework benches, and quality-focused production areas, the Cleco CCBPW123 CellCore cordless electric pistol nutrunner delivers a 2.7 - 8.8 ft-lbs torque range with 800 RPM speed for repeatable rundown on small-to-medium assembly fasteners. Its 3/8" square drive accepts compatible sockets for nut-and-bolt fastening where a bit-style output is not the right fit.

The CCBPW123 combines cordless mobility with Cleco CellCore smart-tool capability, helping operators work without managing an air hose or cord at the station. Its on-tool digital transducer and servo system measure fastening output electronically, while WiFi, Bluetooth, and Cleco Global Controller compatibility support connected assembly environments that rely on fastening data, operator feedback, and repeatable rundown strategies.

Please note that this listing is for the tool only; the Cordless Battery and Charger are not included with the tool and need to be purchased separately.

Type: Cordless Electric Pistol Nutrunner | Series: CellCore | Model: CCBPW123 | Torque Range: 3.6 - 12 Nm / 2.7 - 8.8 ft-lbs | Speed: 800 r/min | Drive Size: 3/8" | Drive Type: Square Drive | Weight Without Battery: 1.05 kg / 2.32 lb | Length: 198 mm / 7.79 in | Height: 204 mm / 8.03 in | Side to Center: 29 mm / 1.14 in | Connectivity: WiFi 2.4 & 5.0 GHz and Bluetooth 4.0

Features:

• CellCore cordless platform gives assembly teams controlled fastening without a trailing air line or power cord.
• 3/8" square drive output works with compatible sockets for nutrunner applications that require socket engagement rather than screwdriver bits.
• Durable, assembly-line-tough construction is drop tested up to 5 feet.
• Reliable fastening platform supports increased uptime with 500k cycles between maintenance.
• Large user interface allows on-the-tool programming without a controller for faster station setup.
• Users can program up to 10 rundown strategies, called FastApps, directly on the tool in standalone mode.
• Compatible with Cleco Global Controller platforms for advanced rundown programming and fastening data capture.
• Color worklight provides secondary okay/not okay visual feedback to help operators confirm fastening status quickly.

Made in USA:

Note: Cordless Battery and Charger Sold Separately. Batteries and Chargers can be purchased from the following links:

Batteries:

• Cleco T50-1000497 Smart Lithium-Ion Battery
• Cleco T50-1000498 Smart Lithium-Ion Battery

Chargers:

• Cleco T50-1000499 Rapid Charger
• Cleco T50-1000500 6-Bay Sequential Charger

Applications:

• Automotive component assembly for brackets, covers, modules, and light torque-controlled socket fastening.
• Appliance and equipment manufacturing where repeatable nut-and-bolt tightening is required at the workstation.
• Industrial assembly cells using connected fastening tools for rundown control, operator feedback, and production traceability.
• Maintenance and rework benches handling fasteners that fall within the 2.7 - 8.8 ft-lbs torque range.
• Electromechanical assembly areas where cordless mobility helps reduce hose and cable clutter around fixtures.

FAQs:

• Q: Is the CCBPW123 pneumatic or cordless electric?
  A: This model is a cordless electric Cleco CellCore pistol nutrunner. It does not require compressed air for operation, even though some listings may use pneumatic-style category wording.
• Q: Are the battery and charger included?
  A: No. This listing is for the tool only; the cordless battery and charger are sold separately and must be purchased separately for operation.
• Q: What is the difference between this model and a 1/4" hex CellCore pistol tool?
  A: The CCBPW123 uses a 3/8" square drive for sockets, making it better suited for nut-and-bolt fastening. A 1/4" hex quick-change model is typically used with screwdriver bits or hex-drive accessories.
• Q: Can this tool be used without a controller?
  A: Yes. CellCore tools can be programmed directly on the tool for standalone use, including up to 10 FastApps rundown strategies. Pairing with a Cleco controller enables more advanced programming and data capture.
• Q: What type of fastening is this torque range used for?
  A: The 2.7 - 8.8 ft-lbs range is used for light controlled assembly fastening where repeatable torque matters, such as brackets, covers, modules, and smaller socket-driven hardware.

Looking for more information about Cleco Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com