Cleco 34RAA47AX3 Clutch Shut-Off Pneumatic Angle Nutrunner | Lever Start | 385 RPM | 17 - 35 (ft-lbs) Torque Range | 3/8" Drive

For assembly work that needs controlled torque in restricted spaces, the Cleco 34RAA47AX3 Clutch Shut-Off Pneumatic Angle Nutrunner gives production teams a right-angle fastening tool with a higher torque band in the 34 Series. Its 17 - 35 ft-lbs torque range supports medium-torque fastening on brackets, housings, fixtures, and equipment subassemblies, while the 385 RPM free speed provides a measured rundown rate for applications where torque repeatability is more important than maximum speed. The 3/8" square drive accepts compatible sockets for nut and bolt fastening in manufacturing, maintenance, and repair environments.

The 34RAA47AX3 uses a Clecomatic Clutch, a shut-off clutch system that stops the tool when the preset torque is reached to help reduce over-tightening and improve joint consistency. Its lever start gives operators deliberate control during repetitive fastening, collar reverse supports quick back-off or rework, and the angle head configuration helps reach fasteners near flanges, panels, brackets, and other obstructions where inline or pistol tools may not fit.

Type: Pneumatic Angle Nutrunner | Series: Cleco 34 Series | Model: 34RAA47AX3 | Start Type: Lever Start | Reverse Type: Collar Reverse | Clutch Type: Clecomatic Clutch Shut-Off | Drive Size: 3/8" Square Drive | Torque Range: 17 - 35 ft-lbs | Free Speed: 385 RPM

Features:

• Clecomatic Clutch shut-off system stops the tool at the preset torque to support repeatable fastening.
• 17 - 35 ft-lbs torque range handles medium-torque assembly joints in production, repair, and MRO work.
• 385 RPM free speed gives controlled rundown for fasteners that require consistent torque instead of impact force.
• 3/8" square drive works with compatible sockets selected for the fastener size and application.
• Right-angle head improves access to fasteners positioned near brackets, housings, panels, and fixture walls.
• Lever start provides deliberate operator control during repetitive fastening cycles.
• Collar reverse allows quick direction changes for fastener removal, alignment correction, and rework.

Made in USA:

Tech Tip: To increase tool performance, extend tool life, and lessen repair costs, use it with a Filter-Regulator-Lubricator FRL)

Applications:

• Industrial assembly — tightening medium-torque bolts and nuts on machinery, fixtures, frames, and subassemblies.
• Automotive and off-road equipment production — fastening brackets, covers, housings, and component assemblies where angle access is required.
• Plant maintenance and MRO — reinstalling fasteners during equipment service, guard replacement, and fixture adjustment.
• Rail, appliance, and general manufacturing — repeatable controlled fastening in assembly cells and workstations.
• Bench and jig work — reaching fasteners close to walls, flanges, or adjacent components where straight tools may not align.

FAQs:

• Q: What is the Cleco 34RAA47AX3 used for?
  A: It is used for controlled-torque fastening in assembly and maintenance applications. The right-angle head helps reach fasteners in tight or obstructed areas, while the shut-off clutch helps stop the tool at the preset torque.
• Q: Is this model meant for breaking loose seized fasteners?
  A: No. This is a clutch shut-off assembly nutrunner, not an impact wrench. It should be used for fastening within its 17 - 35 ft-lbs torque range rather than high-force breakaway work.
• Q: Why choose a 385 RPM nutrunner instead of a faster model?
  A: A lower free speed can give better control on higher-torque joints and helps the operator manage rundown as the fastener approaches final torque. It is useful when repeatability and control matter more than maximum cycle speed.
• Q: What sockets fit the 34RAA47AX3?
  A: This model uses a 3/8" square drive. Select compatible 3/8" drive sockets based on the fastener size, clearance, and application requirements.
• Q: Should this pneumatic nutrunner be used with an FRL?
  A: Yes. A properly sized Filter-Regulator-Lubricator helps maintain clean, regulated, lubricated air, which supports consistent tool performance and helps reduce premature wear.

Looking for more information about Cleco Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com