Cleco 34RAA11AL3 Clutch Shut-Off Pneumatic Angle Nutrunner | Lever Start | 1,675 RPM | 5 - 8 (ft-lbs) Torque Range | 3/8" Drive

For repeat fastening where speed, access, and torque control all matter, the Cleco 34RAA11AL3 clutch shut-off pneumatic angle nutrunner gives assembly operators a compact right-angle tool for socket-driven fastening. It's 1,675 RPM free speed supports fast rundown on small fasteners, while the 5 - 8 ft-lbs torque range fits light production assembly tasks that require more consistency than hand tightening or non-shut-off air tools can provide. The 3/8" square drive accepts compatible sockets for nut and bolt work on brackets, covers, housings, and subassemblies.

The Cleco 34RAA11AL3 uses a clutch shut-off system, meaning the tool stops once the preset torque is reached. This helps reduce over-tightening and supports repeatable results across high-repetition fastening cycles. Its angle-head configuration helps reach fasteners near fixtures, ribs, frame members, and other obstructions where straight tools may not align properly.

Type: Pneumatic Angle Nutrunner | Brand: Cleco | Model: 34RAA11AL3 | Start Type: Lever Start | Clutch Type: Clutch Shut-Off | Free Speed: 1,675 RPM | Torque Range: 5 - 8 ft-lbs | Drive Size: 3/8" Square

Features:

• Clutch shut-off stops the nutrunner when the preset torque is reached, helping support consistent fastening results across repeated cycles.
• 1,675 RPM free speed provides quick rundown for small fasteners while maintaining controlled operation for assembly work.
• Right-angle head improves access to fasteners located near brackets, housings, frames, fixtures, and adjacent components.
• Lever start gives the operator deliberate tool activation during bench, fixture, or line-side fastening tasks.
• 3/8" square drive accepts compatible socket tooling for nut and bolt assembly applications.
• A 5-8 ft-lb torque range suits light controlled-fastening applications where repeatability is more important than breakaway force.
• Pneumatic operation supports production environments already equipped with compressed-air tool systems.

Made in USA:

Tech Tip: To increase tool performance, extend tool life, and lessen repair costs, use it with a Filter-Regulator-Lubricator FRL)

Applications:

• Production assembly — tightening small nuts and bolts where controlled shut-off torque is required.
• Automotive component manufacturing — fastening brackets, covers, supports, panels, and light mechanical subassemblies.
• Appliance and equipment assembly — socket-driven fastening on housings, frames, guards, access plates, and small assemblies.
• Fixture-based workstations — reaching fasteners positioned close to clamps, tooling, ribs, or other access-limiting features.
• Industrial maintenance and rework benches — reinstalling light fasteners during inspection, adjustment, service, and repair tasks.

FAQs:

• Q: What does clutch shut-off mean on this Cleco nutrunner?
  A: Clutch shut-off means the tool stops when it reaches the preset torque. This helps prevent over-tightening and improves fastening repeatability compared with tools that rely only on operator feel.
• Q: What is the benefit of a 1,675 RPM angle nutrunner?
  A: The 1,675 RPM speed helps run fasteners down quickly during repeated assembly work. It is useful when the job needs faster cycle time than slower nutrunners but still requires controlled torque shut-off.
• Q: What sockets fit the 34RAA11AL3?
  A: This model uses a 3/8" square drive, so it accepts compatible 3/8" drive sockets matched to the fastener size and application.
• Q: Is this tool intended for breaking loose stuck bolts?
  A: No. This is a controlled assembly nutrunner, not an impact wrench. It is intended for fastening within its 5 - 8 ft-lbs torque range and should not be selected for rusted or seized fastener removal.
• Q: Why choose an angle nutrunner instead of an inline nutrunner?
  A: An angle nutrunner helps reach fasteners where a straight tool cannot approach the joint squarely. It is useful around fixtures, corners, frame members, panels, and other tight assembly features.

Looking for more information about Cleco Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com