Cleco 34RAA15AM3 Clutch Shut-Off Pneumatic Angle Nutrunner | Lever Start | 1,185 RPM | 7 - 11 (ft-lbs) Torque Range | 3/8" Drive

Built for controlled fastening in assembly stations, maintenance benches, and tight-access equipment work, the Cleco 34RAA15AM3 clutch shut-off pneumatic angle nutrunner combines a compact 90-degree head with a 3/8" square drive, 1,185 RPM free speed, and 7 - 11 ft-lbs torque range. The clutch shut-off mechanism automatically stops the tool when the preset torque is reached, helping operators improve fastening repeatability compared with manual run-down tools or non-shut-off air wrenches.

The 34 Series angle configuration helps reach fasteners near brackets, housings, frames, and other obstructions where inline or pistol tools may not fit. With a 0.52" side-to-center distance and 1.16" head height, this Cleco angle nutrunner is suited for moderate-torque fastening where access, speed, and torque control all matter.

Type: Pneumatic Angle Nutrunner | Brand: Cleco | Model: 34RAA15AM3 | Series: 34 Series | Start Type: Lever Start | Clutch Type: Clecomatic Clutch Shut-Off | Direction: Reversible | Drive Size: 3/8" Square Drive | Torque Range: 7 - 11 ft-lbs / 9 - 15 Nm | Free Speed: 1,185 RPM | Overall Length: 14.6" / 370 mm | Weight: 2.9 lbs / 1.3 kg | Head Height: 1.16" / 29.5 mm | Side to Center: 0.52" / 13.2 mm | Air Inlet: 3/8" NPT | Minimum Hose I.D.: 5/16" | Air Consumption: 34 SCFM

Features:

• Clecomatic clutch shut-off stops the tool at the preset torque, supporting repeatable fastening in production and repair environments.
• Angle head configuration reaches around housings, brackets, and fixture obstructions where straight nutrunners may not have clearance.
• Lever start gives the operator controlled activation during run-down and final tightening.
• Reversible operation supports both installation and removal of compatible threaded fasteners.
• 3/8" square drive accepts matching square-drive sockets for nut and bolt fastening.
• 1,185 RPM free speed helps shorten run-down time on moderate-torque fastening tasks.
• Compact 0.52" side-to-center dimension improves fastener access near walls, edges, and adjacent components.

Made in USA:

Tech Tip: To increase tool performance, extend tool life, and lessen repair costs, use it with a Filter-Regulator-Lubricator FRL)

Applications:

• Assembly operations: Controlled tightening of nuts and bolts where repeatability matters more than breakaway power.
• Automotive and transportation work: Fastening brackets, covers, panels, and subassemblies in locations where a compact angle head improves reach.
• Industrial maintenance and MRO: Service work on machinery, guards, fixtures, and equipment assemblies using compatible 3/8" drive sockets.
• Aerospace and precision manufacturing: Moderate-torque fastening where access constraints and controlled shut-off are important to the process.
• Workshops and production benches: Repeated run-down tasks that benefit from pneumatic speed and clutch-based torque control.

FAQs:

• Q: What does clutch shut-off mean on this Cleco nutrunner?
  A: Clutch shut-off means the tool stops automatically when the adjusted torque is reached. This helps reduce over-tightening and improves consistency on repeated fastening tasks.
• Q: Is the 34RAA15AM3 used for removing stuck bolts?
  A: This is a precision fastening nutrunner, not an impact wrench. It is best used for controlled installation and removal of compatible fasteners within its torque range, not high breakaway applications.
• Q: What sockets fit this tool?
  A: The tool uses a 3/8" square drive, so it requires compatible 3/8" drive sockets matched to the fastener size and application.
• Q: Why choose an angle nutrunner instead of an inline nutrunner?
  A: An angle nutrunner places the drive at 90 degrees to the tool body, making it easier to reach fasteners near corners, housings, frames, or other obstructions.
• Q: What air supply does this tool require?
  A: Manufacturer data lists a 3/8" NPT air inlet, 5/16" minimum hose I.D., and 34 SCFM air consumption. Use a properly sized air line and FRL to help maintain stable tool performance.

Looking for more information about Cleco Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com