Cleco 25GELC-180-W3T3 Cut-off Wheel Extended Horizontal Grinder | 25 Series | 1.4 HP | 18,000 RPM | Aluminum Housing | Side Exhaust

Built for cut-off work in fabrication, maintenance, and repair environments, the Cleco 25GELC-180-W3T3 Extended Horizontal Grinder pairs a 1.4 HP governed air motor with 18,000 RPM free speed for controlled cutting with compatible Type 1 abrasive wheels. Its 3" Type 1 wheel capacity suits compact cut-off access, while the 14.9" extended length helps operators reach into deeper work areas where shorter horizontal grinders may not provide enough clearance.

The 25 Series platform uses an aluminum housing to balance durability with manageable tool weight, and the side exhaust configuration directs spent air away from the front cutting area. A governed motor helps maintain RPM under load, while the safety-lock throttle lever helps reduce accidental starts during handling, positioning, and abrasive changes.

Type: Extended Horizontal Cut-Off Wheel Grinder | Series: 25 Series | Model: 25GELC-180-W3T3 | Power: 1.4 HP / 1.0 kW | Free Speed: 18,000 RPM | Spindle Size: 3/8"-24 External | Abrasive Capacity: 3" / 75 mm Type 1 Cut-Off Wheel | Housing: Aluminum | Exhaust: Side | Weight: 3.7 lb / 1.68 kg | Length: 14.9" / 378 mm | Air Inlet: 3/8" | Minimum Hose I.D.: 3/8" / 9.5 mm | Rated Air Pressure: 90 PSI / 620 kPa

Features:

• Powerful 1.4 HP motor supports cut-off operations using compatible 3" Type 1 abrasive wheels.
• Governed motor helps maintain RPM under load, giving the operator steadier wheel speed during cutting.
• Side exhaust helps route air away from the work area and front cutting path.
• Extended 14.9" body improves reach for recessed, obstructed, or fixture-adjacent cutting tasks.
• Aluminum housing keeps the tool at 3.7 lb while providing a durable body for shop and maintenance use.
• Safety-lock throttle lever helps prevent accidental start-up when the tool is being handled or positioned.
• Standard equipment includes wheel guard, flange wrench, operating instructions, and service manual.

Made in USA:

Applications:

• Metal fabrication: Cutting small stock, trimming metal sections, and separating fasteners or tabs with compatible Type 1 cut-off wheels.
• Industrial maintenance and MRO: Removing damaged bolts, brackets, clamps, and worn components where controlled abrasive cutting is required.
• Automotive and fleet repair: Cutting exhaust hardware, body repair sections, seized fasteners, and shop repair materials when a compact wheel size is preferred.
• Welding and repair stations: Trimming weld-adjacent material, cutting tack welds, and preparing components for rework.
• General shop use: Reaching into fixtures, frames, and obstructed assemblies where the extended horizontal layout gives better access than a shorter grinder.

FAQs:

• Q: What type of wheel does the Cleco 25GELC-180-W3T3 use?
  A: This model is listed for 3" / 75 mm Type 1 cut-off wheels. Always confirm the wheel’s arbor, mounting method, thickness, and maximum RPM before use.
• Q: Why does RPM matter on a cut-off grinder?
  A: The tool runs at 18,000 RPM, so the abrasive wheel must be rated for at least that speed. Using an under-rated wheel is unsafe and can cause wheel failure.
• Q: What does a governed motor do?
  A: A governed motor helps hold the tool closer to its intended speed when load is applied. In practical terms, it helps reduce speed drop during cutting compared with an ungoverned motor.
• Q: Is this a die grinder or a cut-off grinder?
  A: This SKU is a cut-off wheel extended horizontal grinder. It is configured for Type 1 cut-off wheels, not loose burrs or mounted points.
• Q: What air hose size should be used?
  A: Cleco lists a minimum hose I.D. of 3/8" / 9.5 mm for this 25 Series extended grinder. Using undersized hose can restrict airflow and reduce cutting performance.

Looking for more information about Cleco Grinder? Click here to view the Catalog

Need help selecting the correct Cleco Grinders for your application? Please call (800) 608-5210 or email info@intlairtool.com