Cleco 25GELC-120-W3T25 Cut-off Wheel Extended Horizontal Grinder | 2-1/2" Wheel Dia. | 1.4 HP | 12,000 RPM | Aluminum Housing | Side Exhaust

When cutting metal, trimming components, or reaching into recessed work areas, the Cleco 25GELC-120-W3T25 Cut-off Wheel Extended Horizontal Grinder gives technicians a controlled pneumatic cutting setup with extra reach built into the tool body. This 25 Series grinder runs at 12,000 RPM for use with properly rated Type 1 cut-off wheels, while the 2-1/2" wheel capacity supports compact cutting work where larger wheels may be too bulky. Its 1.4 HP motor helps maintain cutting power through routine metal removal tasks, and the 14.4" overall length provides added access into fixtures, frames, weldments, and other areas where a shorter grinder can limit approach angle.

The extended horizontal configuration keeps the wheel in line with the work path, while the side exhaust helps direct discharged air away from the cutting area. A 3/8"-24 external thread spindle supports compatible Type 1 wheel mounting hardware, and the aluminum housing keeps the tool weight to 3.4 lbs. for better handling during repeated cut-off operations. Governor speed control helps maintain RPM under load, and the safety-lock throttle lever helps reduce the risk of accidental start-up.

Type: Cut-off Wheel Extended Horizontal Grinder | Series: Cleco 25 Series | Model: 25GELC-120-W3T25 | Wheel Capacity: 2-1/2" / 63 mm Type 1 | Power: 1.4 HP | Free Speed: 12,000 RPM | Spindle Size: 3/8"-24 External Thread | Housing: Aluminum | Exhaust: Side | Weight: 3.4 lbs. / 1.54 kg | Overall Length: 14.4" / 366 mm | Air Inlet: 3/8" NPT

Features:

• Extended horizontal grinder configuration improves reach into recessed, obstructed, or fixture-heavy work areas.
• 2-1/2" Type 1 cut-off wheel capacity supports compact cutting, trimming, and separation tasks on metal components.
• Governor speed control maintains RPM under load for more consistent wheel performance during cut-off operations.
• Safety-lock throttle lever helps prevent accidental start-up when handling, positioning, or staging the tool.
• Aluminum housing balances durability with a manageable 3.4 lb. tool weight for repeated shop and maintenance use.
• Side exhaust directs air away from the front of the tool to help keep the cut line and work area more manageable.
• W3T25 cut-off configuration includes guard for use with compatible 2-1/2" Type 1 wheels.

Made in USA:

Applications:

• Metal fabrication and weld shops — cutting tabs, trimming small stock, removing excess material, and making controlled cut-off passes.
• Industrial maintenance and MRO — accessing mounted components, brackets, panels, and repair points where a compact wheel and extended reach are useful.
• Automotive, fleet, and equipment repair — cutting clamps, fasteners, sheet metal sections, exhaust components, and service hardware when properly matched to the abrasive.
• Assembly and production support — trimming parts, cleaning up process fixtures, and separating material in controlled pneumatic tool stations.
• Garage and workshop use — metal cutting and repair tasks where the buyer has the correct air supply, wheel rating, guarding, and PPE.

FAQs:

• Q: What wheel size does the Cleco 25GELC-120-W3T25 use?
  A: This model is specified for 2-1/2" / 63 mm Type 1 cut-off wheels. Always verify wheel diameter, wheel type, arbor/mounting compatibility, and maximum RPM before use.
• Q: What does the 3/8"-24 external thread spindle mean?
  A: The spindle thread is the connection point for the wheel mounting hardware. A 3/8"-24 external thread requires compatible adapters, flanges, and cut-off wheel hardware rated for the tool speed and application.
• Q: Why choose an extended horizontal grinder instead of a shorter cut-off tool?
  A: The extended body helps reach into frames, fixtures, brackets, and recessed areas where a standard-length grinder may not provide the right approach angle. It is useful when the cutting point is set back from the operator’s hand position.
• Q: Can this grinder be used with any abrasive wheel rated above 12,000 RPM?
  A: No. The abrasive must meet or exceed the tool’s 12,000 RPM speed rating and must also match the specified wheel type, wheel size, guard, and mounting hardware. Do not use saw blades or non-reinforced grinding wheels on this tool.
• Q: Does the side exhaust matter in tight work areas?
  A: Yes. Side exhaust routes air away from the front of the tool, which can help reduce air blast at the cut line and improve control around debris, sparks, and chips.

Looking for more information about Cleco Grinder? Click here to view the Catalog

Need help selecting the correct Cleco Grinders for your application? Please call (800) 608-5210 or email info@intlairtool.com