Built for controlled fastening on production lines and assembly stations, the Cleco CLBAW303-NA CellClutch right angle cordless electric nutrunner delivers a 6.1 - 22.1 ft-lbs torque range for tightening socket-driven fasteners with repeatable clamp load control. Its 3/8" square drive accepts compatible sockets for nuts and bolts, while the 255 RPM maximum speed gives operators a balanced combination of rundown efficiency and torque capacity for medium-range assembly work.
As part of Cleco’s CellClutch connected cordless fastening platform, the CLBAW303-NA combines the simplicity of a mechanical clutch with programmable rundown strategies, batch counting, and wireless reporting. The right angle head helps operators reach fasteners near housings, brackets, frames, and other obstructions where inline tools cannot seat squarely. WiFi and Bluetooth communication support setting adjustments, live reporting, traceability, and production feedback through the mPro controller platform.
Please note that this listing is for the tool only; the Cordless Battery and Charger are not included with the tool and need to be purchased separately.
Type: Cordless Electric Right Angle Nutrunner | Series: CellClutch Right Angle Series | Model: CLBAW303-NA | Torque Range: 8.3 - 30 Nm / 6.1 - 22.1 ft-lbs | Speed: 26 - 255 RPM | Drive Size: 3/8" Square Drive | Weight Without Battery: 1.8 kg / 3.9 lb | Length: 493 mm / 19.4 in | Side to Center: 15.0 mm / 0.6 in | Height: 76 mm / 3.0 in | Wireless Communication: WiFi / Bluetooth
Features:
- CellClutch cordless platform brings programmable fastening control to assembly stations without air hoses or power cords.
- Mechanical clutch provides positive shut-off for controlled torque output and repeatable fastening performance.
- Right angle configuration improves access to fasteners located near frames, housings, brackets, and other tight-clearance areas.
- WiFi and Bluetooth v4.2 communication support setting adjustments, live reporting, traceability, and batch counting through the mPro controller platform.
- Programmable rundown strategies help reduce cross-threading, rehit errors, and incorrect fastening sequences during production work.
- Speed control allows RPM settings to be adjusted to match the application requirements.
- Multi-color LED worklight illuminates the joint area and provides secondary OK/NOK feedback to the operator.
Made in USA: 
Note: Cordless Battery and Charger Sold Separately. Batteries and Chargers can be purchased from the following links:
Batteries:
Chargers:
Applications:
- Automotive assembly: Tightening socket-driven fasteners on brackets, frames, subassemblies, and production fixtures where traceability is required.
- Aerospace and precision manufacturing: Controlled fastening on joints that benefit from programmable rundown behavior and documented OK/NOK results.
- Industrial equipment assembly: Repeated tightening of nuts and bolts on machinery, housings, guards, and mounted components.
- Appliance and electronics production: Assembly-line fastening where cordless mobility, batch counting, and tool feedback help maintain process control.
- Maintenance and tool crib programs: Standardizing medium-torque right angle cordless tools within facilities using Cleco CellClutch systems.
FAQs:
- Q: What torque range does the CLBAW303-NA cover?
A: The CLBAW303-NA covers 8.3 - 30 Nm, or 6.1 - 22.1 ft-lbs. This places it above the 20 Nm-class model while keeping the same 3/8" square drive format for compatible socket-driven assembly work. - Q: What does the right angle head help with?
A: The right angle head places the output drive at 90 degrees to the tool body, helping operators reach fasteners in tight areas. This is useful around brackets, enclosures, frames, and other locations where a straight tool cannot align properly. - Q: Does this model include the battery and charger?
A: No. This listing is for the tool only; the cordless battery and charger are not included and must be ordered separately. - Q: What is the mPro controller used for?
A: The mPro controller platform supports connected tool setup, reporting, traceability, and batch counting. It helps production teams monitor fastening results and manage programmable rundown strategies. - Q: Is this tool used for loosening stuck fasteners?
A: No. This is a controlled assembly nutrunner, not an impact wrench or breakaway tool. It is intended for tightening fasteners within its published torque range.
| SKU | Torque Range | Free Speed (rpm) | Weight | ||||
|---|---|---|---|---|---|---|---|
| Min Nm | Max Nm | Min Ft Lb | Max Ft Lb | Lb | Kg | ||
| CLBAW203-CN | |||||||
| CLBAW303-CN | |||||||
| CLBAW653-00 | 15.9 | 11.7 | 47.9 | 115 r/min | 4.3 | 2.0 | |
| CLBAW083-00 | 2.2 | 8 | 1.6 | 5.9 | 915 r/min | 3.3 | 1.5 |
| CLBAW083-CN | 2.2 | 8 | 1.6 | 5.9 | 915 r/min | 3.3 | 1.5 |
| CLBAW083-EU | 2.2 | 8 | 1.6 | 5.9 | 915 r/min | 3.3 | 1.5 |
| CLBAW083-NA | 2.2 | 8 | 1.6 | 5.9 | 915 r/min | 3.3 | 1.5 |
| CLBAW123-00 | 3.3 | 12 | 2.4 | 8.8 | 650 r/min | 3.3 | 1.5 |
| CLBAW123-CN | 3.3 | 12 | 2.4 | 8.8 | 650 r/min | 3.3 | 1.5 |
| CLBAW123-EU | 3.3 | 12 | 2.4 | 8.8 | 650 r/min | 3.3 | 1.5 |
| CLBAW123-NA | 3.3 | 12 | 2.4 | 8.8 | 650 r/min | 3.3 | 1.5 |
| CLBAW203-00 | 8.3 | 21 | 6.1 | 15.5 | 360 r/min | 3.9 | 1.8 |
| CLBAW203-EU | 8.3 | 21 | 6.1 | 15.5 | 360 r/min | 3.9 | 1.8 |
| CLBAW203-NA | 8.3 | 21 | 6.1 | 15.5 | 360 r/min | 3.9 | 1.8 |
| CLBAW303-00 | 8.3 | 30 | 6.1 | 22.1 | 255 r/min | 3.9 | 1.8 |
| CLBAW303-EU | 8.3 | 30 | 6.1 | 22.1 | 255 r/min | 3.9 | 1.8 |
| CLBAW303-NA | 8.3 | 30 | 6.1 | 22.1 | 255 r/min | 3.9 | 1.8 |
| CLBAW403-00 | 15.1 | 41 | 11.1 | 30.2 | 185 r/min | 4.1 | 1.9 |
| CLBAW403-CN | 15.1 | 41 | 11.1 | 30.2 | 185 r/min | 4.1 | 1.9 |
| CLBAW403-EU | 15.1 | 41 | 11.1 | 30.2 | 185 r/min | 4.1 | 1.9 |
| CLBAW403-NA | 15.1 | 41 | 11.1 | 30.2 | 185 r/min | 4.1 | 1.9 |
| CLBAW653-CN | 15.9 | 65 | 11.7 | 47.9 | 115 r/min | 4.3 | 2 |
| CLBAW653-EU | 15.9 | 65 | 11.7 | 47.9 | 115 r/min | 4.3 | 2 |
| CLBAW653-NA | 15.9 | 65 | 11.7 | 47.9 | 115 r/min | 4.3 | 2 |
Looking for more information about Cleco Nutrunner? Click here to view the Catalog
Need help selecting the correct Cleco Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
