Cleco CLBAW083-NA CellClutch Right Angle Cordless Electric Nutrunner | 915 RPM | 1.6 - 5.9 (ft-lbs) Torque Range | 3/8" Square Drive

Built for light-torque assembly work where mobility, access, and fastening feedback matter, the Cleco CLBAW083-NA CellClutch Right Angle Cordless Electric Nutrunner combines a 1.6 - 5.9 ft-lbs torque range with a 3/8" square drive for controlled fastening on smaller bolts, brackets, covers, and production hardware. Its 915 RPM maximum speed enables fast rundown before the final clutch shut-off, helping operators move through repeated fastening cycles without relying on air hoses or corded tool cables. The right angle head reaches into assemblies where pistol tools may not fit, while the CellClutch mechanical clutch provides torque control by shutting off tightening rotation when the set torque is reached.

As a connected North America model, the CLBAW083-NA includes WiFi and Bluetooth wireless communication for setting adjustments, live reporting, traceability, and batch counting through the mPro controller platform. CellClutch tools are built for precision assembly environments where cross-thread prevention, over-torque protection, and operator feedback are part of the fastening process. The catalog-listed accuracy rating of Cmk > 1.67 within +/- 10% indicates repeatable performance within the stated tolerance range for controlled assembly applications.

Please note that this listing is for the tool only; the Cordless Battery and Charger are not included and must be purchased separately.

Type: Cordless Electric Right Angle Nutrunner | Series: CellClutch Right Angle Series | Model: CLBAW083-NA | Torque Range: 2.2 - 8 Nm / 1.6 - 5.9 ft-lbs | Speed Range: 92 - 915 RPM | Output Drive: 3/8" Square Drive | Weight Without Battery: 1.46 kg / 3.2 lb | Length: 453 mm / 17.8" | Side to Center: 12.5 mm / 0.5" | Height: 76 mm / 3.0" | Wireless Communication: WiFi and Bluetooth

Features:

• CellClutch mechanical clutch shuts off tightening rotation when the set torque is reached to help reduce over-torque damage on controlled assembly joints.
• Programmable speeds and multi-stage rundown strategies help reduce cross-threading, re-hits, and fastening errors during repeated production cycles.
• WiFi 2.4 GHz / 5 GHz and Bluetooth v4.2 wireless communication support setting adjustments, live reporting, traceability, and batch counting through the mPro controller platform.
• Operator status light provides clear rundown and batch count feedback so operators can quickly identify OK / NOK fastening status.
• Multi-color LED work light illuminates the workpiece while also providing secondary OK / NOK visual feedback.
• Single battery platform across the Cleco cordless range helps reduce battery complexity and inventory cost in production environments.
• Speed control lets users adjust RPM settings to match the fastening requirement, joint type, and process strategy.
• CellClutch software is included with tool purchase to help reduce total cost of ownership for setup and programming.

Made in USA: 

Note: Cordless Battery and Charger Sold Separately. Batteries and Chargers can be purchased from the following links:

Batteries:

• Cleco T50-1000497 Smart Lithium-Ion Battery
• Cleco T50-1000498 Smart Lithium-Ion Battery

Chargers:

• Cleco T50-1000499 Rapid Charger
• Cleco T50-1000500 6-Bay Sequential Charger

Applications:

• Automotive assembly stations fastening brackets, covers, interior components, trim hardware, and light-duty bolted joints that require repeatable low-torque control.
• Appliance and electronics manufacturing where cordless movement, batch counting, and OK / NOK feedback help support consistent assembly workflows.
• Agriculture and off-road equipment assembly for small fasteners in panels, guards, covers, and subassemblies where a right angle head improves access.
• Heavy truck and trailer production lines completing controlled fastening on light brackets, harness supports, access panels, and secondary assembly hardware.
• Industrial assembly and repair cells replacing air hose-dependent fastening with a connected cordless tool for traceable, low-torque rundown work.

FAQs:

• Q: What does the CLBAW083-NA torque range mean in practical use?
  A: The tool covers 2.2 - 8 Nm, or 1.6 - 5.9 ft-lbs, which places it in the light-torque precision fastening range. It is intended for controlled assembly hardware, not high-torque structural bolts or lug nuts.
• Q: What is the difference between CLBA and CLBAW models?
  A: CLBAW models are the connected versions with WiFi and Bluetooth capability. The wireless connection supports setting adjustments, live reporting, traceability, and batch counting through the mPro controller platform.
• Q: Does the mPro controller come with this nutrunner?
  A: No. Cleco notes that the mPro controller platform is sold separately for connected-tool communication and reporting.
• Q: Why choose a right angle cordless nutrunner instead of a pistol tool?
  A: A right angle head helps reach fasteners tucked inside fixtures, housings, frames, and compact assemblies. Cordless operation also removes the air hose or power cable from the operator’s work area.
• Q: Does this tool include a battery and charger?
  A: The provided source data lists tool weight without battery and gives battery weights, but it does not confirm whether a battery or charger is included with this SKU. Please verify kit contents before publishing or ordering.

Looking for more information about Cleco Nutrunner? Click here to view the Catalog

Need help selecting the correct Cleco Nutrunners for your application? Please call (800) 608-5210 or email info@intlairtool.com