Ingersoll Rand G1A200RP63 Angle Grinder | 0.4 HP | 20,000 RPM | 3/8" 24 Thread, 3" Guard | Rear Exhaust

For high-speed grinding, weld cleanup, and localized surface preparation with a compact guarded abrasive, the Ingersoll Rand G1A200RP63 Angle Grinder combines a 0.4 HP pneumatic motor with 20,000 RPM free speed, a 3/8"-24 threaded spindle, and a 3-inch guard. This configuration supports focused material removal on edges, weld areas, brackets, and fabricated components where a smaller wheel provides better access than a full-size angle grinder.

The Ingersoll Rand G1A200RP63 uses an angle-head layout to position compatible guarded abrasives for controlled contact with flat surfaces, edges, and localized repair areas. Its rear exhaust directs discharged air away from the immediate grinding interface, helping reduce airflow disturbance around the abrasive and workpiece. The combination of a compact 3-inch guard and 20,000 RPM output makes accessory compatibility especially important: every mounted abrasive must match the spindle, guard, dimensions, application, and required speed rating.

Type: Angle Grinder | Model: G1A200RP63 | Series: G1 Series | Configuration: Angle | Motor Power: 0.4 HP | Free Speed: 20,000 RPM | Spindle Thread: 3/8"-24 | Guard Size: 3" | Exhaust: Rear

Features:

• 0.4 HP pneumatic motor supplies power for localized grinding, weld cleanup, material removal, and surface preparation.
• 20,000 RPM free speed supports fast abrasive action with accessories rated for the tool's maximum operating speed.
• 3/8"-24 threaded spindle accepts compatible abrasive accessories with the correct mounting interface.
• 3-inch guard configuration supports compact guarded abrasives for focused grinding around edges, brackets, welds, and restricted work areas.
• Angle-head layout provides practical accessory positioning on flat surfaces, edges, and fabricated components.
• Rear exhaust routes discharged air away from the immediate grinding area and workpiece.
• G1 Series configuration combines compact wheel capacity with high rotational speed for repeated industrial surface-preparation work.

Made in USA:

Applications:

• Metal fabrication — grinding localized weld areas, cleaning edges, and removing excess material from brackets and fabricated parts.
• Industrial maintenance and MRO — preparing machinery components, correcting damaged surfaces, and cleaning repair areas during equipment service.
• Automotive and transportation repair — working on compatible brackets, frames, housings, and components where a compact guarded wheel improves access.
• Foundry and casting cleanup — removing small gates, parting lines, and localized surface imperfections from compatible cast parts.
• General manufacturing — performing repeated grinding and surface-conditioning operations on production components and assemblies.

FAQs:

• Q: What abrasive size is the Ingersoll Rand G1A200RP63 configured to use?
  A: The grinder is configured with a 3-inch guard. Use only compatible abrasive accessories that match the guard, spindle thread, application, and manufacturer requirements.
• Q: What accessories fit the 3/8"-24 spindle?
  A: Use properly rated grinding or surface-preparation accessories with a matching 3/8"-24 mounting interface. The accessory must also fit the 3-inch guard and carry a maximum operating-speed rating equal to or greater than 20,000 RPM.
• Q: How does this model differ from a collet-style angle die grinder?
  A: The G1A200RP63 uses a threaded spindle and 3-inch guard for compatible guarded abrasives. A collet-style die grinder instead grips the straight shank of a carbide burr, mounted point, or similar accessory.
• Q: What does rear exhaust mean?
  A: Rear exhaust means discharged air exits toward the back of the grinder rather than directly around the abrasive and workpiece, helping reduce airflow disturbance near the grinding area.
• Q: Can a larger wheel be installed if the spindle thread matches?
  A: No. Wheel compatibility depends on the guard size, spindle interface, abrasive dimensions, wheel type, and maximum operating speed. A matching thread alone does not make an accessory safe for the grinder.

Looking for more information about the Ingersoll Rand Grinder? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Grinders for your application, please call (800) 608-5210 or email info@intlairtool.com