Ingersoll Rand G1A200RS4 Angle Belt Sander | G1 Series | 0.4 HP | 20,000 RPM | Rear Exhaust

For faster weld blending, edge cleanup, and localized surface preparation with a narrow abrasive belt, the Ingersoll Rand G1A200RS4 Angle Belt Sander combines a 0.4 HP pneumatic motor with 20,000 RPM free speed and a compact G1 Series angle configuration. The belt-sanding format helps operators work along seams, edges, brackets, and contoured components where a narrow abrasive contact area can provide better access and control than larger sanding discs or guarded grinding wheels.

The Ingersoll Rand G1A200RS4 provides a higher-speed belt-sanding option for removing localized surface imperfections, blending weld areas, refining edges, and preparing metal surfaces for subsequent finishing steps. Its rear exhaust routes discharged air away from the immediate sanding area, helping reduce direct airflow disturbance near the abrasive belt and workpiece. The 20,000 RPM configuration should be paired with the manufacturer-specified belt size and abrasives suited to the material, finishing process, and tool operating requirements.

Type: Angle Belt Sander | Model: G1A200RS4 | Series: G1 Series | Configuration: Angle | Motor Power: 0.4 HP | Free Speed: 20,000 RPM | Exhaust: Rear

Features:

• 0.4 HP pneumatic motor supplies power for weld blending, edge finishing, deburring, and localized surface-preparation operations.
• 20,000 RPM free speed provides a higher-speed sanding configuration for compatible abrasive belts selected for the application.
• Angle-head layout helps position the abrasive belt around seams, edges, brackets, contours, and work areas with limited straight-line access.
• Narrow abrasive contact area supports focused material removal and controlled surface refinement on localized sections of the workpiece.
• Rear exhaust directs discharged air away from the immediate sanding area and abrasive contact point.
• Abrasive belt selection can be matched to the workpiece material, starting surface condition, material-removal requirement, and desired finish.
• G1 Series configuration provides a compact pneumatic platform for repeated sanding and blending work in fabrication, repair, and production environments.

Made in USA:

Applications:

• Metal fabrication — blending weld seams, refining cut edges, and preparing localized surfaces on fabricated parts and assemblies.
• Transportation equipment repair — cleaning brackets, seams, housings, and repair areas where compact belt access matches the component geometry.
• Industrial maintenance and MRO — removing localized corrosion, coatings, and surface irregularities from machinery and equipment components.
• Surface finishing — refining scratches, blending transitions, and preparing localized metal surfaces with abrasive belts selected for the required finish.
• General manufacturing — performing repetitive deburring, edge cleanup, and surface-preparation operations on production components.

FAQs:

• Q: What types of work is the Ingersoll Rand G1A200RS4 suited for?
  A: The tool is suited for weld blending, edge cleanup, deburring, localized coating removal, and surface preparation where a narrow abrasive belt provides suitable access and controlled contact with the workpiece.
• Q: How does the G1A200RS4 differ from the G1A120RS4?
  A: The G1A200RS4 operates at 20,000 RPM, while the G1A120RS4 operates at 12,000 RPM. Both supplied titles identify G1 Series angle belt sanders with 0.4 HP motors and rear exhaust, so belt and contact-arm specifications should be confirmed for each exact model.
• Q: What abrasive belt size does the G1A200RS4 use?
  A: Use the belt dimensions specified by Ingersoll Rand for this exact model and contact-arm configuration. Confirm the required belt width and length in the current manufacturer catalog before ordering replacement abrasives.
• Q: How should abrasive grit be selected for this sander?
  A: Select the grit according to the workpiece material, starting surface condition, amount of material to remove, and desired finish. Coarser grades are generally used for initial correction, followed by finer grades when additional surface refinement is required.
• Q: What does rear exhaust mean?
  A: Rear exhaust routes discharged air toward the back of the tool rather than directly around the abrasive belt and immediate work surface, helping reduce airflow disturbance near the sanding area.

Looking for more information about the Ingersoll Rand Sander? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Sanders for your application, please call (800) 608-5210 or email info@intlairtool.com