Ingersoll Rand 280-S-6 Super Duty Impact Wrench | Spline Drive | 6000 RPM | 1600 ft-lbs Max Torque | Inside Trigger

Ingersoll Rand 280-S-6 D-Handle Air Impact Wrench is a spline-drive configuration built for high-production truck tire service and other demanding heavy fastening applications. Equipped with a No. 5 spline drive, it delivers up to 1,600 ft-lbs (2,169 Nm) of maximum torque and operates at a 6,000 RPM free speed, combining substantial pneumatic output with an extended configuration for added reach.

The 280-S-6 uses Ingersoll Rand's jumbo hammer power mechanism to transfer high-impact torque through the spline drive, while its D-handle layout provides a substantial gripping position for controlling the tool. An in-handle exhaust directs discharged air away from the operator, and the 18.5" (470 mm) overall length provides additional reach for heavy vehicle service applications.

Type: Air Impact Wrench | Model: 280-S-6 | Handle: D-Handle | Drive Type: No. 5 Spline Drive | Maximum Torque: 1,600 ft-lbs (2,169 Nm) | Working Torque Range: 150–1,000 ft-lbs (204–1,360 Nm) | Free Speed: 6,000 RPM | Weight: 23.8 lb (10.80 kg) | Length: 18.5" (470 mm) | Average Air Consumption: 10 CFM (283 L/min) | Air Consumption at Load: 55 CFM (1,557 L/min) | Sound Pressure / Power: 109.1 / 122.1 dBA | Air Inlet: 1/2" NPTF | Minimum Hose Size: 1/2" (13 mm)

Features:

• No. 5 spline drive provides the connection specified for compatible spline-drive sockets and fastening equipment.
• Jumbo hammer power mechanism delivers high-impact torque for demanding heavy-service fastening and removal work.
• D-handle configuration provides a substantial gripping position for supporting and controlling the wrench during operation.
• Extended tool configuration provides additional reach for fasteners located farther from the operator's working position.
• In-handle exhaust directs discharged air away from the operator during use.
• 6,000 RPM free speed supports productive operation on large threaded fasteners.
• Working torque range extends from 150 to 1,000 ft-lbs, with maximum torque reaching 1,600 ft-lbs.
• 280-TK2 tune-up kit is specified by Ingersoll Rand for servicing the 280 family.

Tech Tip: To increase tool performance, extend tool life, and lessen repair costs, use it with a Filter-Regulator-Lubricator (FRLs)

Applications:

• High-production truck tire changing requiring substantial pneumatic impact power.
• Heavy truck service involving compatible No. 5 spline-drive sockets and fasteners.
• Commercial vehicle maintenance where an extended D-handle impact wrench provides useful reach.
• Heavy-service fastening and removal tasks requiring high torque through a spline-drive connection.

FAQs:

• Q: What drive type does the Ingersoll Rand 280-S-6 use?
  A: The 280-S-6 uses a No. 5 spline drive. Compatible spline-drive sockets or fastening equipment should be selected for this drive configuration.
• Q: How much maximum torque does the 280-S-6 provide?
  A: Ingersoll Rand specifies up to 1,600 ft-lbs (2,169 Nm) of maximum torque, with a working torque range of 150–1,000 ft-lbs (204–1,360 Nm).
• Q: What is the free speed of the 280-S-6?
  A: The manufacturer specification table lists a free speed of 6,000 RPM.
• Q: How does the 280-S-6 differ from the 280-6?
  A: The primary difference is the drive configuration. The 280-S-6 uses a No. 5 spline drive, while the 280-6 uses a 1" square drive.
• Q: What air supply specifications should be considered for the 280-S-6?
  A: The source specifies a 1/2" NPTF air inlet and a minimum 1/2" (13 mm) hose size. Average air consumption is 10 CFM (283 L/min), while air consumption at load is 55 CFM (1,557 L/min).
• Q: What are the size and weight of the 280-S-6?
  A: The manufacturer lists the 280-S-6 at 18.5" (470 mm) long with a weight of 23.8 lb (10.80 kg).

Looking for more information about the Ingersoll Rand Air Impact Wrench? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Impact Wrenches, please call (800) 608-5210 or email info@intlairtool.com