Dotco 12L2500-01RT Inline Router | 12-25 Series | 0.9 HP | 23,000 RPM | 1/4" Shank Diameter Capacity | Composite Housing | Front Exhaust

Built for controlled portable routing, trimming, and cutout work, the Dotco 12L2500-01RT Inline Router delivers 0.9 HP in a compact straight-body configuration that helps operators guide the tool along edges, templates, and fixture-mounted workpieces. It's 23,000 RPM free speed supports clean material removal with properly matched router bits, while the 1/4" shank diameter capacity accepts common industrial routing cutters with a 1/4" shank. The 12-25 Series composite housing keeps weight manageable for hand-guided use, and the front exhaust directs spent air forward, which may be preferred in applications where rear-exhaust airflow would interfere with the operator or work area.

This model uses a lever throttle for on-tool speed control and a roll valve style layout that supports smooth operation during routing passes. All tool performance is rated at 90 PSI / 620 kPa, and Cleco specifies a 5/16" minimum hose I.D. to help the router receive adequate air volume at the tool. Router guides are sold separately, making this unit a practical choice for shops that already use dedicated guides, fixtures, or application-specific routing setups.

Note: Router Template Guide is not included; it is sold separately.

Type: Inline Router | Brand: Dotco | Model: 12L2500-01RT | Series: 12-25 Series | Power: 0.9 HP / 0.67 kW | Free Speed: 23,000 RPM | Shank Diameter Capacity: 1/4" | Housing: Composite | Exhaust: Front | Throttle: Lever Throttle | Weight: 2.65 lb / 1.20 kg | Overall Length: 7.1" / 180 mm | Air Inlet: 1/4" NPT | Minimum Hose I.D.: 5/16" / 7.9 mm | Rated Air Pressure: 90 PSI / 620 kPa

Features:

• 0.9 HP motor provides higher routing power for demanding portable trimming and profiling work.
• 23,000 RPM free speed supports clean routing passes when used with properly rated cutters.
• 1/4" shank diameter capacity accepts common industrial router bits with compatible shanks.
• 12L composite handle configuration offers a comfortable grip and keeps the tool weight suitable for hand-guided operation.
• Front exhaust configuration directs spent air forward instead of back toward the operator’s hand or air supply line.
• Lever throttle and roll valve style operation help the user control the tool during start, approach, and routing pass transitions.
• Standard equipment includes the collet and applicable wrenches needed for basic cutter installation and service.
• Router guides are sold separately, allowing buyers to match the guide setup to their specific routing task.

Made in USA:

Applications:

• Composite trimming and fabrication — routing panels, edge profiles, and cutouts when paired with the correct cutter, guide, and dust-control process.
• Aerospace and transportation shops — controlled hand routing of lightweight materials, fixture-based trimming, and production support tasks.
• Industrial maintenance and MRO — modifying guards, covers, panels, and replacement parts where a pneumatic inline router fits the workspace.
• Woodworking and pattern work — guided routing, template following, and edge clean-up using compatible 1/4" shank router bits.
• Fabrication and repair benches — portable shaping, trimming, and material removal where air-powered routing is preferred over electric tools.

FAQs:

• Q: What does 1/4" shank diameter capacity mean?
  A: It refers to the diameter of the router bit shank that fits the tool’s collet. It does not describe the cutter head diameter, cutting depth, or material capacity, so always match the bit, collet, and application before use.
• Q: Can this router be used with template guides?
  A: Yes, but Cleco notes that router guides are sold separately. Choose the guide or fixture setup that matches the cutter size, material, and routing path required for the job.
• Q: What air line should be used with the 12L2500-01RT?
  A: Cleco rates the tool at 90 PSI / 620 kPa and specifies a 5/16" minimum hose I.D. for the 12-25 Series. Undersized hose can restrict airflow and reduce routing performance.
• Q: Is the front exhaust version different from the rear exhaust version?
  A: Yes. This 12L2500-01RT is the front exhaust model, meaning exhaust air exits toward the front of the tool. Rear exhaust versions route air away from the work end and may be preferred in different shop setups.
• Q: Does this tool include router guides or cutting bits?
  A: The confirmed standard equipment is the collet and applicable wrenches. Router guides and cutting bits should be selected separately based on the material, bit shank, and routing requirement.

Looking for more information about Dotco Router? Click here to view the Catalog

Need help selecting the correct Dotco Routers for your application? Please call (800) 608-5210 or email info@intlairtool.com