Dotco 10L2500-01RT Inline Router | 12-25 Series | 0.9 HP | 23,000 RPM | 1/4" Shank Diameter Capacity | Aluminum Housing | Front Exhaust

Built for controlled routing, trimming, and material removal work, the Dotco 10L2500-01RT Inline Router pairs a compact inline body with 0.9 HP / 0.67 kW output for faster cuts in production and repair environments. Its 23,000 RPM free speed helps maintain clean bit action on compatible materials, while the 1/4" shank diameter capacity fits common router bits and cutters used for edge work, template routing, and trimming operations. The aluminum housing gives this 10L configuration a solid tool body, and the front exhaust directs spent air forward from the tool during operation.

The 10L2500-01RT uses a roll valve throttle, a hand-operated air control that helps the user start and regulate the tool during routing. With a 6.9" / 175 mm overall length, 2.43 lb / 1.10 kg tool weight, and 1/4" air inlet, this pneumatic router is suited for fixture work, bench routing, and portable trimming where corded electric routers may be too bulky. Router guides are sold separately, so verify the required guide or template accessory before ordering.

Note: Router Template Guide is not included; it is sold separately.

Type: Inline Router | Series: 10-25 / 12-25 Series | Model: 10L2500-01RT | Power: 0.9 HP / 0.67 kW | Free Speed: 23,000 RPM | Shank Diameter Capacity: 1/4" | Housing: Aluminum | Exhaust: Front | Throttle: Roll Valve | Overall Length: 6.9" / 175 mm | Weight: 2.43 lb / 1.10 kg | Air Inlet Size: 1/4" | Minimum Hose I.D.: 5/16" / 7.9 mm | Rated Air Pressure: 90 PSI / 620 kPa

Features:

• 0.9 HP motor provides sustained power for routing operations where steady speed helps maintain cut quality.
• 23,000 RPM free speed supports fast trimming and routing with properly rated 1/4" shank bits.
• Aluminum 10L handle configuration gives the tool a compact, solid body for portable and fixture-based routing work.
• Roll valve throttle allows controlled air actuation during start-up and tool handling.
• Front exhaust configuration directs exhaust air forward from the router body.
• Supplied with collet and applicable wrenches for standard setup.
• Router guides are sold separately, allowing buyers to match the guide setup to their specific routing fixture or template.

Made in USA:

Applications:

• Composite and fiberglass shops — trimming edges, following templates, and routing openings with compatible 1/4" shank cutters.
• Aerospace and transportation manufacturing — portable routing work on panels, fixtures, and production components where air tools are preferred.
• Fabrication and repair work — controlled material removal, edge cleanup, and repetitive routing tasks at benches or workstations.
• Woodworking and pattern work — template-guided routing when the selected bit, material, and speed rating match the tool.
• Maintenance and tool rooms — shop routing tasks where a compact pneumatic router is easier to handle than a larger electric unit.

FAQs:

• Q: What router bit shank size fits the Dotco 10L2500-01RT?
  A: This model is specified for 1/4" shank diameter capacity. Use only compatible 1/4" shank router bits or cutters that are appropriate for the material and rated for the tool speed.
• Q: What does front exhaust mean on this router?
  A: Front exhaust means spent air exits toward the front of the tool body. This can be helpful in some routing setups, but users should still manage chips, dust, and airflow at the work area.
• Q: Are router guides included?
  A: No. The manufacturer notes that router guides are sold separately. The tool is supplied with the collet and applicable wrenches, but guide accessories should be selected based on the routing setup.
• Q: What air hose size should be used?
  A: The manufacturer specifies a minimum hose I.D. of 5/16" / 7.9 mm, with tool performance rated at 90 PSI / 620 kPa. Undersized hose can restrict airflow and reduce tool performance.
• Q: Can this router be used for DIY woodworking?
  A: It can be used for woodworking when connected to a properly regulated air supply and matched with the correct 1/4" shank bit. Because it is a pneumatic production tool, buyers should confirm compressor capacity, bit speed rating, and safe chip control before use.

Looking for more information about Dotco Router? Click here to view the Catalog

Need help selecting the correct Dotco Routers for your application? Please call (800) 608-5210 or email info@intlairtool.com