Dotco 12L2580-01RT Inline Router | 12-25 Series | 0.9 HP | 23,000 RPM | 1/4" Shank Diameter Capacity | Composite Housing | Rear Exhaust

When routing smaller profiles, templates, and trim cuts with a pneumatic tool, the Dotco 12L2580-01RT Inline Router gives the operator 0.9 HP of cutting power in a compact 12-25 Series composite-handle body. It's 23,000 RPM free speed supports fast material removal with properly rated router bits, while the 1/4" shank diameter capacity fits common router-bit shanks used for lighter trimming, edge profiling, and detailed routing work. The rear exhaust configuration sends air away from the cutter end of the tool, helping reduce air blast at the work surface during controlled routing passes.

This model is the 1/4" shank, rear-exhaust version of the 12-25 Series Dotco inline router. The straight inline body helps with hand-guided cuts, fixture work, and template routing where tool control matters. Router guides are sold separately, so buyers can pair the tool with the guide style, cutter, and setup required for the material being routed.

Note: Router Template Guide is not included; it is sold separately.

Type: Inline Router | Brand: Dotco / Cleco | Series: 12-25 Series | Model: 12L2580-01RT | Power: 0.9 HP / 0.67 kW | Free Speed: 23,000 RPM | Shank Diameter Capacity: 1/4" | Housing: Composite | Exhaust: Rear | Weight: 2.6 lb / 1.18 kg | Length: 7.1" / 180 mm | Air Inlet: 1/4" | Rated Air Pressure: 90 PSI / 620 kPa | Minimum Hose I.D.: 5/16" / 7.9 mm

Features:

• 0.9 HP higher-power motor supports faster routing than lower-power pneumatic trimming tools.
• 23,000 RPM free speed is suited for compatible cutters that require high spindle speed for clean edge work and trimming.
• 1/4" shank diameter capacity fits common router-bit shanks used for detail routing, edge profiling, and light trimming operations.
• 12L composite handle keeps the tool body practical for repeated hand-guided routing and fixture-assisted work.
• Rear exhaust directs discharge air toward the back of the tool instead of toward the cutter and work surface.
• Inline configuration provides a straight tool layout for controlled movement along templates, edges, and workholding fixtures.
• Supplied with collet and applicable wrenches for basic setup.
• Router guides are sold separately, so the guide setup can be matched to the application.

Made in USA:

Applications:

• Composite and plastics trimming: Routing edges, openings, and profiles in compatible materials when used with the correct cutter and dust-control process.
• Template routing: Following patterns, fixtures, and guides for repeatable cuts in shop or production environments.
• Aerospace and transportation fabrication: Trimming lightweight panels and fitted components where a compact pneumatic router body supports controlled handling.
• Laminate and sheet-material work: Cutting smaller edge profiles, openings, and detail shapes with 1/4" shank router bits.
• Maintenance and repair shops: Cleaning up routed openings, fitting parts, and handling controlled material-removal tasks where a die grinder is not the preferred tool.

FAQs:

• Q: What router bit shank size does the 12L2580-01RT accept?
  A: This model is listed with a 1/4" shank diameter capacity. Use only compatible cutters and collet components that match the tool and are rated at or above 23,000 RPM.
• Q: When should I choose the 1/4" shank version instead of the 3/8" shank version?
  A: The 1/4" shank version is typically chosen for smaller cutters, lighter trimming, and detail routing. The 3/8" shank version may be preferred when the cutter setup requires a larger shank for added rigidity.
• Q: Are router guides included with this Dotco router?
  A: No. Router guides are sold separately. The standard equipment listed for this tool includes the collet and applicable wrenches.
• Q: What air pressure should this tool be run at?
  A: The manufacturer rates tool performance at 90 PSI / 620 kPa air pressure. Use clean, regulated air and a minimum 5/16" hose I.D. to help maintain proper tool performance.
• Q: What does rear exhaust do on a pneumatic router?
  A: Rear exhaust routes air toward the back of the tool rather than toward the cutter end. This helps reduce exhaust disturbance near the cut line during trimming, guide work, and edge routing.

Looking for more information about Dotco Router? Click here to view the Catalog

Need help selecting the correct Dotco Routers for your application? Please call (800) 608-5210 or email info@intlairtool.com