Dotco 12L2502-01RT Inline Router | 12-25 Series | 0.9 HP | 18,000 RPM | 1/4" Shank Diameter Capacity | Composite Housing | Front Exhaust

Built for controlled routing and trimming work on production fixtures, fabrication benches, and material removal stations, the Dotco 12L2502-01RT Inline Router pairs a 0.9 HP / 0.67 kW pneumatic motor with 18,000 RPM free speed for fast cutting action with compatible router bits. Its 1/4" shank diameter capacity accepts common industrial routing cutters, while the inline body helps the operator guide the tool along edges, templates, and shaped workpieces with a straighter hand position than pistol-style tools.

Part of the Dotco 12-25 Series, this model uses a composite housing to keep tool weight manageable at 2.65 lb, with a front exhaust layout that directs air away from the rear of the tool during use. The roll valve gives convenient throttle control, and the 7.1" overall length keeps the router compact enough for bench work, portable routing operations, and shop-floor trimming tasks where a corded electric router may be too bulky or less convenient.

Note: Router Template Guide is not included; it is sold separately.

Type: Inline Router | Series: 12-25 Series | Model: 12L2502-01RT | Power: 0.9 HP / 0.67 kW | Free Speed: 18,000 RPM | Shank Diameter Capacity: 1/4" | Exhaust: Front | Housing: Composite | Weight: 2.65 lb | Overall Length: 7.1" / 180 mm | Air Inlet Size: 1/4" | Minimum Hose I.D.: 5/16" / 7.9 mm | Performance Rating: 90 PSI / 620 kPa

Features:

• Higher power motor for faster routing in portable trimming and material removal work.
• Sustained power supports continuous cutting paths when matched with the correct bit, air supply, and work material.
• Composite comfortable grip helps reduce tool weight while maintaining a secure hand position during guided routing.
• Roll valve provides convenient operation without changing the inline handling position.
• Front exhaust directs air forward and away from the rear of the tool during use.
• Compact 7.1" body supports bench, fixture, and edge-routing work where tool control matters.
• Router guides are sold separately for applications requiring guided cuts or template-following setups.

Made in USA:

Applications:

• Composite and plastic trimming — routing edges, openings, and profiles in compatible non-metallic workpieces using the correct 1/4" shank bit.
• Aerospace and transportation shops — controlled trimming of routed panels, interior components, and production parts where compact pneumatic tooling is preferred.
• Fabrication and fixture work — following templates, edge guides, and shop-built jigs for repeatable routing tasks.
• Manufacturing and MRO — deburring routed openings, shaping material edges, and supporting light production repair work.
• Woodworking and prototype benches — portable routing where compressed air is available and the workpiece, bit, and speed rating are compatible.

FAQs:

• Q: What size router bit shank does the Dotco 12L2502-01RT accept?
  A: This inline router has a 1/4" shank diameter capacity. Use only router bits that match the 1/4" capacity and are rated for the tool’s 18,000 RPM free speed.
• Q: What does front exhaust mean on this router?
  A: Front exhaust means the tool vents air toward the front of the housing rather than out the rear. This can be helpful when the operator wants exhaust air directed away from the hand and air hose area.
• Q: Does this router include a template guide?
  A: No. The router template guide is not included and must be purchased separately when the job requires guided or template-following cuts.
• Q: What air setup should be used with this pneumatic router?
  A: The catalog rates tool performance at 90 PSI / 620 kPa and specifies a minimum hose I.D. of 5/16" / 7.9 mm. Use a clean, regulated air supply and confirm the compressor can maintain pressure during routing.
• Q: Is this the same as a die grinder?
  A: No. Although Dotco routers share some compact pneumatic tool characteristics with grinders, this model is configured as an inline router for use with compatible routing bits and guide setups, not as a general abrasive grinding tool.

Looking for more information about Dotco Router? Click here to view the Catalog

Need help selecting the correct Dotco Routers for your application? Please call (800) 608-5210 or email info@intlairtool.com