Dotco 10LF201-36 Right Angle Grinder | 10LF Series | 0.4 HP | 20,000 RPM | 1/4" Collet | Aluminum Housing | Front Exhaust

Built for controlled deburring, die grinding, and fine finishing in tight work areas, the Dotco 10LF201-36 right-angle die grinder combines a compact 90-degree head with 0.4 HP / 0.29 kW of pneumatic power and a 20,000 RPM free speed. The 1/4" collet accepts compatible carbide burrs and mounted points, while the right angle body helps reach into corners, fixture pockets, weldments, and other areas where a straight die grinder may not fit.

Part of the Dotco 10LF Series, this front exhaust grinder uses an aluminum housing to keep tool weight down while maintaining a solid feel in the hand. The front exhaust configuration directs air away from the operator’s grip area and is useful when working close to the part. With a 6.6" overall length and 2.7" head height, the 10LF201-36 is well suited for metal fabrication, transportation equipment work, welding cleanup, ship repair, and precision material removal tasks.

Type: Right Angle Die Grinder | Series: 10LF Series | Model: 10LF201-36 | Power: 0.4 HP / 0.29 kW | Free Speed: 20,000 RPM | Collet Size: 1/4" | Abrasive Capacity: 1/2" Carbide Burr, 1" Mounted Wheel | Housing Material: Aluminum | Exhaust: Front | Overall Length: 6.6" / 168 mm | Head Height: 2.7"

Features:

• Right angle configuration reaches into confined areas where inline die grinders may not provide enough access.
• 20,000 RPM free speed supports fast deburring, blending, and fine finishing with compatible burrs and mounted wheels.
• Standard equipped with 300 Series collet for use with 1/4" shank accessories.
• Front exhaust helps direct exhaust air away from the operator’s hand position during close-detail work.
• Lightweight construction supports better control during detail grinding and edge cleanup.
• Durable aluminum housing provides a solid tool body while helping keep total tool weight manageable.
• Compact head height helps improve access around fixtures, weld beads, flanges, and interior corners.

Made in USA:

Applications:

• Metal fabrication: Deburring machined edges, blending weld starts and stops, and cleaning tight inside corners with carbide burrs.
• Welding and repair shops: Removing small weld defects, smoothing tack welds, and preparing localized areas for finishing.
• Transportation equipment manufacturing: Detail grinding around brackets, frames, panels, and production fixtures.
• Ship repair and maintenance: Cleaning weldments, removing burrs, and finishing confined metal surfaces where compact tool access matters.
• General MRO and toolroom work: Touch-up grinding, part modification, and precision cleanup on steel, aluminum, and fabricated components.

FAQs:

• Q: Is the Dotco 10LF201-36 a die grinder or a wheel grinder?
  A: This model is a right angle die grinder with a 1/4" collet. It is intended for compatible shank-mounted accessories such as carbide burrs and mounted wheels, not large Type 27 grinding wheels.
• Q: What accessories can be used with the 1/4" collet?
  A: Use accessories with a compatible 1/4" shank and a maximum operating speed that equals or exceeds 20,000 RPM. Always confirm the accessory manufacturer’s speed rating before use.
• Q: Why choose front exhaust instead of rear exhaust?
  A: Front exhaust directs air at the front of the tool, which can be useful when the operator wants exhaust flow away from the grip area. For applications where exhaust direction around the workpiece is a concern, compare this model with the rear exhaust variation before ordering.
• Q: Is this grinder suitable for tight areas?
  A: Yes. The right angle head and compact 2.7" head height help the tool reach into corners, fixture pockets, and other spaces where straight grinders may be difficult to position.
• Q: Does this tool require lubricated air?
  A: Yes. As a pneumatic grinder, it should be used with clean, regulated, properly lubricated air to help maintain performance and reduce premature wear.

Looking for more information about Dotco Tool? Click here to view the Catalog

Need help selecting the correct Dotco Tools for your application? Please call (800) 608-5210 or email info@intlairtool.com