Dotco 10LF200-32 Right Angle Sander | 10LF Series | 0.4 HP | 12,000 RPM | 1/4"- 28 i | Aluminum Housing | Front Exhaust

Built for controlled sanding, blending, and surface preparation in tight work areas, the Dotco 10LF200-32 right angle sander combines 0.4 HP / 0.29 kW of pneumatic power with a 12,000 RPM free speed for detail finishing where access and control matter. The 1/4"-28 internal spindle accepts compatible sanding pads and threaded accessories, while the compact right angle configuration helps reach around fixtures, inside corners, brackets, and fabricated assemblies where straight tools may not fit.

Part of the Dotco 10LF Series, this front exhaust sander uses an aluminum housing to provide a solid yet manageable tool body for production, repair, and maintenance work. The front exhaust configuration directs air forward, which can be useful when the operator wants exhaust flow away from the grip area during close-detail sanding or localized surface prep.

Type: Right Angle Sander | Series: 10LF Series | Model: 10LF200-32 | Power: 0.4 HP / 0.29 kW | Free Speed: 12,000 RPM | Spindle: 1/4"-28 Internal | Housing Material: Aluminum | Exhaust: Front

Features:

• Right angle configuration improves access for sanding and blending in corners, pockets, brackets, and restricted work areas.
• 12,000 RPM free speed supports controlled surface preparation with compatible sanding pads and abrasive accessories.
• 0.4 HP pneumatic motor provides useful power for localized sanding, blending, and finishing operations.
• 1/4"-28 internal spindle accepts compatible threaded sanding accessories used for detail work.
• Front exhaust directs air discharge toward the front of the tool and away from the operator’s grip area.
• Aluminum housing helps keep the tool manageable while providing a solid body for shop and production use.
• Compact 10LF Series body supports controlled work on fabricated, welded, machined, and finished components.

Made in USA:

Applications:

• Metal fabrication: Blending edges, smoothing small weld areas, and preparing localized surfaces before coating or assembly.
• Maintenance and MRO: Cleaning repair areas, removing light surface defects, and preparing parts for repainting or refinishing.
• Transportation equipment work: Sanding brackets, panels, frames, and welded assemblies in confined access areas.
• Machine shops and toolrooms: Detail finishing, edge refinement, and small component surface preparation.
• General shop use: Controlled sanding on steel, aluminum, and fabricated components with properly rated accessories.

FAQs:

• Q: What does the 1/4"-28 internal spindle mean?
  A: It refers to the tool’s threaded accessory connection. Use sanding pads and accessories that match the 1/4"-28 internal spindle specification and are rated for the tool’s 12,000 RPM speed.
• Q: Is this the same as the 10LF200-36 grinder?
  A: No. The 10LF200-32 is configured as a right angle sander with a 1/4"-28 internal spindle, while the 10LF200-36 grinder version uses a 1/4" collet for shank-mounted burrs and mounted points.
• Q: Can I use any sanding disc on this tool?
  A: No. The backing pad, abrasive, and attachment style must be compatible with the 1/4"-28 spindle and rated for at least 12,000 RPM.
• Q: Why choose a right angle sander?
  A: A right angle sander gives better access around corners, fixtures, panels, and fabricated assemblies than many straight tools, especially during localized finishing work.
• Q: Does this pneumatic sander need an FRL?
  A: Yes. Clean, regulated, lubricated air helps maintain tool performance and reduce avoidable internal wear.

Looking for more information about Dotco Tool? Click here to view the Catalog

Need help selecting the correct Dotco Tools for your application? Please call (800) 608-5210 or email info@intlairtool.com