Dotco 10LF200-36 Right Angle Grinder | 10LF Series | 0.4 HP | 12,000 RPM | 1/4" Collet | Aluminum Housing | Front Exhaust

Built for controlled deburring, finishing, and light material removal in restricted work areas, the Dotco 10LF200-36 right-angle die grinder pairs a compact 90-degree head with 0.4 HP / 0.29 kW of pneumatic power and a lower 12,000 RPM free speed for applications where more control is preferred over maximum speed. The 1/4" collet accepts compatible shank-mounted accessories such as carbide burrs and mounted points, while the right angle body helps operators reach around fixtures, inside corners, weldments, and other areas where a straight die grinder may be difficult to position.

Part of the Dotco 10LF Series, this front exhaust grinder uses an aluminum housing to provide a solid, manageable tool body for detail grinding tasks. The front exhaust configuration directs exhaust air forward, which can be helpful when the operator wants air discharge away from the grip area. With its combination of compact access, moderate speed, and 1/4" collet capacity, the 10LF200-36 is suited for fabrication shops, weld cleanup, maintenance departments, transportation equipment work, and toolroom finishing.

Type: Right Angle Die Grinder | Series: 10LF Series | Model: 10LF200-36 | Power: 0.4 HP / 0.29 kW | Free Speed: 12,000 RPM | Collet Size: 1/4" | Housing Material: Aluminum | Exhaust: Front

Features:

• Right angle configuration improves access to corners, pockets, flanges, and fixture-restricted areas.
• 12,000 RPM free speed supports controlled grinding and finishing with compatible 1/4" shank accessories.
• 0.4 HP pneumatic motor provides useful power for deburring, blending, and localized material removal.
• 1/4" collet accepts common carbide burrs and mounted points used in fabrication and maintenance work.
• Front exhaust directs air discharge toward the front of the tool and away from the operator’s grip area.
• Aluminum housing keeps the tool body solid while helping maintain manageable handling during detail work.
• Compact 10LF Series design is well suited for controlled work on small parts, weldments, and fabricated components.

Made in USA:

Applications:

• Fabrication shops: Deburring cut edges, cleaning small weld areas, and smoothing hard-to-reach surfaces.
• Welding repair: Blending tack welds, removing minor imperfections, and preparing localized areas for finishing.
• Maintenance and MRO: Touch-up grinding, part cleanup, and small component modification in plant repair departments.
• Transportation equipment work: Finishing brackets, panels, frames, and assemblies where right angle access is useful.
• Toolroom and machine shop use: Controlled deburring and edge cleanup on machined or fabricated metal parts.

FAQs:

• Q: What is the main difference between the Dotco 10LF200-36 and faster 10LF models?
  A: The 10LF200-36 runs at 12,000 RPM, giving it a lower-speed setup than 20,000 RPM models. This can be helpful when the application calls for more controlled finishing or when the accessory being used has a lower maximum RPM rating.
• Q: Can this grinder use standard 1/4" shank burrs?
  A: Yes, this model uses a 1/4" collet for compatible 1/4" shank carbide burrs, mounted points, and similar accessories. Always confirm the accessory is rated for at least 12,000 RPM before mounting it.
• Q: Is this a right angle die grinder or a wheel grinder?
  A: This is a right angle die grinder with a collet. It is intended for shank-mounted accessories, not large depressed-center grinding wheels or saw blades.
• Q: Why choose a front exhaust grinder?
  A: Front exhaust directs air discharge forward, which may be preferred when the operator wants exhaust flow away from the grip area. Workpiece sensitivity, chip direction, and operator preference should be considered when choosing exhaust style.
• Q: Does this pneumatic grinder need an FRL?
  A: Yes. A properly sized Filter-Regulator-Lubricator helps deliver clean, regulated, lubricated air, which supports tool performance and reduces avoidable wear.

Looking for more information about Dotco Tool? Click here to view the Catalog

Need help selecting the correct Dotco Tools for your application? Please call (800) 608-5210 or email info@intlairtool.com