Dotco 10L2000-36 Inline Grinder | 10-20 Series | 0.6 HP | 25,000 RPM | 1/4" Collet | Aluminum Housing | Front Exhaust

For fast edge cleanup, casting work, and controlled deburring with 1/4" shank accessories, the Dotco 10L2000-36 Inline Grinder pairs 0.6 HP pneumatic output with a 25,000 RPM free speed to keep carbide burrs and mounted wheels cutting efficiently. Its straight, inline body gives technicians a natural, pencil-like approach angle for guiding the tool along holes, contours, fixture edges, and machined surfaces. The 1/4" 300 Series collet supports common die grinder accessories, while the front exhaust directs spent air forward and away from the operator’s hand during grinding and finishing work.

The 10L2000-36 is part of the Dotco 10-20 Series, a compact inline grinder family used for die/mold work, deburring, and small-area material removal. A lock-off lever throttle requires a deliberate start action to help reduce accidental activation, and the aluminum housing keeps the tool light enough for repeated shop use. With its 3/4" carbide burr and 1-1/2" mounted wheel abrasive capacity, this model fits maintenance benches, fabrication cells, repair departments, and finishing stations that need speed, access, and accessory control in one straight grinder.

Type: Inline Die Grinder | Series: Dotco 10-20 Series | Model: 10L2000-36 | Motor: 0.6 HP / 0.45 kW | Free Speed: 25,000 RPM | Collet Size: 1/4 in. | Collet Series: 300 Series | Exhaust: Front | Throttle Type: Lock-Off Lever | Abrasive Capacity: 3/4" Carbide Burr, 1-1/2" Mounted Wheel | Housing: Aluminum | Overall Length: 6.4 in. / 163 mm | Weight: 1.2 lb / 0.54 kg | Air Inlet: 1/4" NPT | Minimum Hose I.D.: 5/16 in. / 7.9 mm | Operating Pressure: Rated at 90 PSI / 620 kPa

Features:

• Durable aluminum housing supports daily die grinding, deburring, and finishing work while keeping the tool compact and manageable.
• 25,000 RPM free speed helps carbide burrs and mounted wheels cut cleanly when matched with properly rated accessories.
• 300 Series collet configuration provides a secure hold for compatible 1/4" shank rotary abrasives.
• Front exhaust routes spent air out the front of the tool, away from the operator’s grip area during use.
• Lock-off lever throttle helps reduce accidental start-up when the tool is being handled, moved, or repositioned.
• Inline body style gives the user direct control for edge work, hole deburring, casting cleanup, and close-detail material removal.
• Standard equipment includes the applicable collet and collet wrenches for setup and accessory changes.

Made in USA:

Applications:

• Die and mold finishing: Blending tight profiles, removing machining marks, and cleaning parting lines with carbide burrs or mounted points.
• Metal fabrication: Deburring drilled holes, trimming small edges, cleaning fixture contact points, and preparing parts for assembly or coating.
• Maintenance and MRO shops: Touch-up grinding on brackets, housings, guards, castings, and repair components where a straight grinder improves access.
• Welding departments: Cleaning small weld areas, removing spatter, and blending tabs or joints before inspection or finishing.
• Automotive, fleet, and garage work: Port cleanup, casting work, bracket modification, and small metal repair tasks when paired with a properly sized air supply.

FAQs:

• Q: What is the difference between the 10L2000-36 and the 10L2000-01?
  A: Both are 25,000 RPM front exhaust inline grinders, but the suffix identifies the collet series. The -36 version uses a 300 Series collet, while the -01 version uses a 200 Series collet.
• Q: Can this grinder use standard 1/4" shank carbide burrs?
  A: Yes, this model is listed with a 1/4" collet and a 3/4" carbide burr capacity. The accessory must be properly seated, compatible with the collet, and rated for at least the tool’s 25,000 RPM speed.
• Q: What does front exhaust mean on this Dotco grinder?
  A: Front exhaust sends air forward from the tool instead of through the rear. This can be useful when the operator wants exhaust routed away from the hand and air line area.
• Q: What air pressure should be used with this tool?
  A: This grinder family is performance rated at 90 PSI / 620 kPa. Use clean, regulated, lubricated air and avoid undersized hoses or fittings that restrict air flow.
• Q: Is this grinder used for cutting discs?
  A: No. This is an inline die grinder for compatible burrs and mounted wheels within the listed abrasive capacity. Do not mount saw blades, cut-off wheels not approved for the tool, or non-reinforced grinding wheels.

Looking for more information about Dotco Grinder Motor? Click here to view the Catalog.

Need help selecting the correct Dotco Grinder Motors for your application? Please call (800) 608-5210 or email info@intlairtool.com