Dotco 10L2002-36 Inline Die Grinder | 10-20 Series | 0.6 HP | 18000 RPM | 1/4" Collet | Front Exhaust

When you need a compact inline grinder for die work, casting cleanup, and controlled deburring, the Dotco 10L2002-36 Inline Die Grinder provides 0.6 HP of pneumatic power with an 18,000 RPM free speed for use with compatible carbide burrs and mounted wheels. The inline body gives the operator a straight approach to the workpiece, while the 1/4" collet supports common industrial burr and mounted-wheel shanks used for shaping, blending, and edge cleanup.

This 10-20 Series model uses a front exhaust configuration, a lock-off lever throttle, and an aluminum housing to balance power, control, and handling in daily material-removal work. Its catalog-rated abrasive capacity is 3/4" carbide burr and 1-1/2" mounted wheel, giving buyers a clear accessory range for deburring, die/mold touch-up, small casting cleanup, and localized surface blending.

Type: Inline Die Grinder | Series: 10-20 Series | Model: 10L2002-36 | Power: 0.6 HP (0.45 kW) | Free Speed: 18,000 RPM | Collet Size: 1/4" | Collet Guard: 300 Series | Throttle Type: Lock-Off Lever | Exhaust: Front | Abrasive Capacity: 3/4" Carbide Burr, 1-1/2" Mounted Wheel | Housing: Aluminum | Weight: 1.4 lb (0.64 kg) | Length: 6.6" (168 mm) | Air Inlet Size: 1/4" | Air Pressure: 90 PSI (620 kPa) | Minimum Hose I.D.: 5/16" (7.9 mm) | Standard Equipment: Applicable collet, collet wrenches

Features:

• 0.6 HP motor supports controlled material removal with compatible carbide burrs and mounted wheels.
• 18,000 RPM free speed provides a balanced speed range for deburring, blending, and small-area finishing work.
• 1/4" collet accepts common die grinder accessories within the tool’s catalog-rated abrasive capacity.
• 300 Series collet guard configuration matches the -36 termination listed for this model family.
• Lock-off lever throttle helps reduce unintended starts by requiring deliberate lever engagement before operation.
• Front exhaust configuration routes exhaust at the tool front instead of through a rear exhaust hose setup.
• Aluminum housing keeps the tool compact and manageable for bench work, die/mold cleanup, and close hand control.
• Standard equipment includes the applicable collet and collet wrenches for setup and accessory changes.

Made in USA:

Applications:

• Die and mold work: Touching up tight contours, refining parting lines, and using carbide burrs for controlled stock removal.
• Machine shops and fabrication: Deburring drilled holes, easing sharp edges, and cleaning small metal parts after machining or welding.
• Foundry and casting cleanup: Removing flash, smoothing localized casting imperfections, and blending small surfaces with mounted wheels.
• Industrial maintenance and MRO: Preparing small repair areas, cleaning brackets, and reworking worn or burred components at the bench.
• Automotive, fleet, and garage repair: Detail grinding on housings, brackets, and metal repair parts when a compact 1/4" collet die grinder is appropriate.

FAQs:

• Q: What accessories can be used with the Dotco 10L2002-36?
  A: This model is listed for a 1/4" collet with an abrasive capacity of 3/4" carbide burr and 1-1/2" mounted wheel. Always confirm the accessory shank size, rated speed, and application before use.
• Q: What does front exhaust mean on this die grinder?
  A: Front exhaust means exhaust air exits at the front of the tool rather than through a rear exhaust or overhose-ready configuration. This matters when comparing tool layout, hose routing, and where exhaust air will be directed during use.
• Q: What air pressure and hose size does this grinder require?
  A: The tool performance is rated at 90 PSI (620 kPa). The catalog lists a minimum hose I.D. of 5/16" (7.9 mm) for this 10-20 Series configuration.
• Q: Does the tool include the collet and wrenches?
  A: Yes. The listed standard equipment includes the applicable collet and collet wrenches.
• Q: Can this grinder be used with cut-off wheels?
  A: This model is cataloged for carbide burrs and mounted wheels. For cut-off wheels, use a properly guarded cut-off tool rated for the wheel size and speed.

Looking for more information about Dotco Grinder Motor? Click here to view the Catalog.

Need help selecting the correct Dotco Grinder Motors for your application? Please call (800) 608-5210 or email info@intlairtool.com