Dotco 10L2080-36 Inline Grinder | 10-20 Series | 0.6 HP | 25,000 RPM | 1/4" Collet | Aluminum Housing | Rear Exhaust

Built for deburring, die and mold cleanup, and mounted-wheel finishing, the Dotco 10L2080-36 inline grinder pairs a compact straight-body layout with 0.6 HP (0.45 kW) power and 25,000 RPM free speed for controlled material removal on metal edges, contours, and toolroom details. The inline configuration keeps the abrasive in line with the tool body, helping the user guide carbide burrs and mounted wheels with steady hand control.

This 10-20 Series model uses a 1/4" collet and 300 Series collet guard for common industrial burr and mounted point setups, with abrasive capacity listed for a 3/4" carbide burr or 1.5" mounted wheel. The rear exhaust layout helps route exhaust away from the front of the tool, while the aluminum housing keeps the tool weight to 1.3 lb / 0.59 kg for extended bench, fixture, and repair work.

Type: Inline Die Grinder | Series: 10-20 Series | Power: 0.6 HP / 0.45 kW | Free Speed: 25,000 RPM | Collet Guard: 300 Series | Collet Size: 1/4" | Throttle Type: Lock-Off Lever | Exhaust: Rear | Abrasive Capacity: 3/4" Carbide Burr, 1.5" Mounted Wheel | Housing: Aluminum | Weight: 1.3 lb / 0.59 kg | Length: 6.4" / 163 mm | Air Inlet Size: 1/4" | Minimum Hose I.D.: 5/16" / 7.9 mm | Rated Air Pressure: 90 PSI / 620 kPa

Features:

• Durable aluminum housing supports routine deburring and die/mold work without adding unnecessary tool weight.
• Inline body style helps maintain straight, controlled contact between the abrasive accessory and the work surface.
• Rear exhaust model is OH Overhose Ready for additional noise suppression when used with a compatible overhose setup.
• Lock-off lever throttle helps reduce accidental starts during handling, repositioning, and accessory changes.
• 300 Series collet guard configuration with 1/4" collet fits common carbide burrs and mounted wheels within the listed abrasive capacity.
• Supplied with the applicable collet and collet wrenches as standard equipment.
• Performance rated at 90 PSI / 620 kPa air pressure, with a minimum 5/16" hose I.D. recommended by the manufacturer.

Made in USA:

Applications:

• Die and mold shops: Cleaning parting lines, refining pockets, and shaping small contours with carbide burrs.
• Metal fabrication: Removing burrs from drilled holes, cut edges, weld prep areas, and machined components.
• Maintenance and MRO: Touch-up grinding on brackets, castings, replacement parts, and equipment repair work.
• Machine shops: Bench deburring, chamfer cleanup, and light mounted-wheel finishing on small workpieces.
• Garage and repair work: Controlled cleaning of metal edges and tight spots when paired with compatible, speed-rated accessories.

FAQs:

• Q: What does the 300 Series collet guard mean on the 10L2080-36?
  A: The -36 termination identifies this model as the 300 Series collet guard version. It still uses a 1/4" collet, but the guard configuration differs from the -01 version that uses the 200 Series collet setup.
• Q: Can this grinder run 1/4" shank carbide burrs?
  A: Yes, this model has a 1/4" collet and the listed abrasive capacity includes a 3/4" carbide burr. Always confirm that the burr shank fits securely and that the accessory speed rating equals or exceeds 25,000 RPM.
• Q: What air setup does this Dotco inline grinder require?
  A: The manufacturer rates tool performance at 90 PSI / 620 kPa and lists a minimum hose I.D. of 5/16" / 7.9 mm. A properly sized air supply helps the grinder maintain speed under load.
• Q: Does this tool include a carbide burr or mounted wheel?
  A: The catalog lists the applicable collet and collet wrenches as standard equipment. Carbide burrs, mounted wheels, and other abrasive accessories are not listed as included.
• Q: Why choose rear exhaust on an inline grinder?
  A: Rear exhaust helps direct exhaust air away from the front of the tool and work area. On this series, rear exhaust models are also OH Overhose Ready for added noise suppression with compatible overhose equipment.

Looking for more information about Dotco Grinder Motor? Click here to view the Catalog.

Need help selecting the correct Dotco Grinder Motors for your application? Please call (800) 608-5210 or email info@intlairtool.com