Dotco 10L2000-01 Inline Grinder | 10-20 Series | 0.6 HP | 25,000 RPM | 1/4" Collet | Aluminum Housing | Front Exhaust

Built for die grinding, deburring, and small-area material removal, the Dotco 10L2000-01 Inline Grinder combines 0.6 HP output with a 25,000 RPM free speed to keep carbide burrs and mounted wheels cutting efficiently on metal, castings, fixtures, and machined parts. The 1/4" collet accepts common 1/4" shank rotary accessories, while the compact inline body helps technicians guide the tool closely along edges, contours, and recessed surfaces.

Part of the Dotco 10-20 Series, this front-exhaust model uses a lock-off lever throttle to help reduce unintended start-up during handling. The aluminum housing keeps the tool body rigid and lightweight, and the catalog-rated abrasive capacity supports a 3/4" carbide burr or 1-1/2" mounted wheel. A carbide burr is a rotary cutting accessory used for shaping and deburring; a mounted wheel is a small abrasive wheel bonded to a shank for localized grinding and finishing.

Type: Inline Grinder | Series: 10-20 Series | Power: 0.6 HP / 0.45 kW | Free Speed: 25,000 RPM | Collet Size: 1/4" | Collet Series: 200 Series | Throttle Type: Lock-Off Lever Throttle | Exhaust: Front | Abrasive Capacity: 3/4" Carbide Burr, 1-1/2" Mounted Wheel | Housing Material: Aluminum | Length: 5.8" / 147 mm | Air Inlet: 1/4" NPT | Minimum Hose I.D.: 5/16" / 7.9 mm | Rated Air Pressure: 90 PSI / 620 kPa

Features:

• 0.6 HP motor provides practical cutting power for die/mold work, edge cleanup, and controlled deburring operations.
• 25,000 RPM free speed supports fast stock removal when paired with properly rated rotary accessories.
• 1/4" 200 Series collet accepts common 1/4" shank carbide burrs, mounted wheels, and compatible finishing accessories.
• Lock-off lever throttle helps prevent accidental start-up during tool handling, positioning, or accessory changes.
• Front exhaust configuration vents air forward from the tool body and should be matched to the work area, part sensitivity, and chip-control needs.
• Durable aluminum housing provides a compact, rigid body for routine production, repair, and finishing work.
• Rated for 3/4" carbide burrs and 1-1/2" mounted wheels.
• Standard equipment includes the applicable collet and collet wrenches.

Made in USA:

Applications:

• Die and mold shops — cleaning mold edges, removing flash, and refining small contours with carbide burrs.
• Metal fabrication — deburring cut edges, blending small weld starts and stops, and cleaning drilled or machined openings.
• Manufacturing maintenance — touching up brackets, fixtures, replacement guards, and modified machine components.
• Automotive and fleet repair — removing burrs, gasket residue, and sharp edges on metal parts where a compact air grinder is easier to control than a larger wheel tool.
• General shop finishing — using mounted wheels for localized grinding, smoothing, and part cleanup on compatible materials.

FAQs:

• Q: What is the difference between the 10L2000-01 and rear-exhaust versions?
  A: The 10L2000-01 is the front-exhaust model. Rear-exhaust versions route air toward the back of the tool and may be preferred when exhaust flow near the workpiece is a concern.
• Q: What does the 1/4" collet size mean?
  A: The collet is the clamping sleeve that holds the accessory shank. This grinder accepts compatible 1/4" shank accessories, including properly rated carbide burrs and mounted wheels.
• Q: Can I use any 1/4" burr or mounted wheel on this grinder?
  A: No. The accessory must fit the collet correctly and must have a maximum operating speed equal to or greater than 25,000 RPM. Do not exceed the manufacturer’s abrasive capacity ratings.
• Q: Why is a lock-off lever throttle helpful?
  A: A lock-off lever requires an intentional motion before the throttle can be activated. This helps reduce accidental start-up while the tool is being handled, moved, or positioned near the workpiece.
• Q: What air setup should be used with this grinder?
  A: Use clean, regulated compressed air at 90 PSI / 620 kPa with a 5/16" minimum hose I.D. and a 1/4" NPT air connection. A properly sized FRL helps maintain air quality and tool performance.

Looking for more information about Dotco Grinder Motor? Click here to view the Catalog.

Need help selecting the correct Dotco Grinder Motors for your application? Please call (800) 608-5210 or email info@intlairtool.com