Built for dual-line hose handling on mobile service platforms, equipment skids, and plant maintenance systems, the Coxreels 1275-6-50-EF is a 1275 Series dual hose electric motor rewind reel with a 24V DC motor. Its 1" hose I.D. capacity supports larger hose assemblies for higher-flow service, while the 50 ft hose capacity gives operators usable reach without leaving paired hoses loose across the floor, truck bed, or equipment platform. Rated for 3000 PSI maximum pressure, this less-hose reel is intended for compatible medium-pressure systems where the hose assembly must be selected separately for fluid type, pressure rating, temperature, and routing requirements.
The dual hose layout provides two hose paths on one reel body, helping paired lines stay together during payout, storage, and rewind. A 24V DC rewind motor is a practical choice where low-voltage DC power is already available, such as service trucks, mobile lubrication systems, utility equipment, and battery-powered installations. The motorized rewind reduces manual hose handling, while the open drum slot promotes flatter wrapping and helps reduce hose crimping during repeated reel cycles.
Type: Dual Hose Electric Motor Rewind Hose Reel | Series: 1275 Series | Model: 1275-6-50-EF | Configuration: Less Hose | Motor: 24V DC | Hose I.D.: 1" | Hose O.D.: 1-7/16" | Hose Capacity: 50 ft | Max Pressure: 3000 PSI | Hose Included: No | Overall Dimensions: 30.63" W x 22.88" H x 20" L | Mounting Pattern: 16.81" M x 13.75" N | Base: 19" X x 18.88" Y
Features:
- Dual hose reel configuration stores and rewinds two hose lines on one reel, helping paired hoses stay organized during service work.
- 24V DC motor rewind supports low-voltage DC-powered installations such as service trucks, mobile skids, and equipment-mounted systems.
- Two external fluid paths with swivel inlets and low-profile outlets help guide each hose path cleanly during payout and rewind.
- Direct gear drive rewind on motorized models provides positive retrieval without chain drive components.
- All-welded steel 'A' frame construction supports stable mounting on equipment platforms, vehicle beds, skids, and fixed shop installations.
- Rolled edges and ribbed discs strengthen the drum and help protect hose during winding and storage.
- Open drum slot allows smoother, flatter hose wrapping to help reduce crimping as the hose is rewound.
- Permanently lubricated, self-aligning pillow block bearings support smooth drum rotation with reduced routine bearing maintenance.
Made in USA: 
Applications:
- Service trucks and mobile maintenance platforms using 24V DC power for motorized hose rewind.
- Fleet and utility equipment where paired medium-pressure hoses need compact storage and controlled retrieval.
- Industrial maintenance and MRO areas where dual hose management helps reduce floor clutter and trip hazards.
- Hydraulic service systems that require separately selected 1" hose assemblies matched to the system fluid and pressure.
- Equipment skids, lube systems, and process support installations where two hose lines must pay out and rewind together.
FAQs:
- Q: What does 'less hose' mean on the 1275-6-50-EF?
A: It means the reel is supplied without hose installed. The buyer must select compatible 1" I.D. hose separately, making sure hose outside diameter, pressure rating, temperature rating, and fluid compatibility match the application. - Q: Is this the explosion proof motor version?
A: No. Based on the supplied title, this SKU uses a 24V DC motor rewind configuration and does not state explosion proof. For hazardous-location applications, select a reel with the correct confirmed explosion proof motor rating and verify the required electrical classification before ordering. - Q: When is a 24V DC motor rewind reel a good choice?
A: A 24V DC rewind reel is commonly used where low-voltage DC power is available, such as mobile equipment, service vehicles, and battery-powered systems. Confirm the available power supply and wiring requirements before installation. - Q: Can this reel be used for hydraulic hose service?
A: Yes, when the selected hose, fittings, fluid, and system pressure are compatible with the reel's 3000 PSI maximum pressure rating. Because this SKU is less hose, hose selection is part of the installation process. - Q: What should be checked before installing the reel?
A: Verify the reel dimensions, mounting pattern, hose bend radius, hose weight, power source, and clearance for payout and rewind. The mounting surface must support the reel, hose, fittings, and operating loads.
| LESS HOSE | SIZE INDEX |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | APRX. LBS. |
|||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||
| 1275-6-50-A | 1" | 1 7/16" | 2/50 | 3/4" | 1 1/4" | 2/60 | 1" F NPT | 3,000 | 63 | 5 |
| 1275-6-50-C | 1" | 1 7/16" | 2/50 | 3/4" | 1 1/4" | 2/60 | 1" F NPT | 3,000 | 63 | 5 |
| 1275-6-50-E | 1" | 1 7/16" | 2/50 | 3/4" | 1 1/4" | 2/60 | 1" F NPT | 3,000 | 63 | 5 |
| 1275-6-50-EA | 1" | 1 7/16" | 2/50 | 3/4" | 1 1/4" | 2/60 | 1" F NPT | 3,000 | 63 | 5 |
| 1275-6-50-EB | 1" | 1 7/16" | 2/50 | 3/4" | 1 1/4" | 2/60 | 1" F NPT | 3,000 | 63 | 5 |
| 1275-6-50-ED | 1" | 1 7/16" | 2/50 | 3/4" | 1 1/4" | 2/60 | 1" F NPT | 3,000 | 63 | 5 |
| 1275-6-50-EF | 1" | 1 7/16" | 2/50 | 3/4" | 1 1/4" | 2/60 | 1" F NPT | 3,000 | 63 | 5 |
| 1275-6-50-EJ | 1" | 1 7/16" | 2/50 | 3/4" | 1 1/4" | 2/60 | 1" F NPT | 3,000 | 63 | 5 |
| 1275-6-50-H | 1" | 1 7/16" | 2/50 | 3/4" | 1 1/4" | 2/60 | 1" F NPT | 3,000 | 63 | 5 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
