Coxreels 1275-6-50-E Dual Hose Electric DC Non-explosion Proof Motor Rewind Reel | 1275 Series | 1" Hose Diameter | 50' Hose Length | 3000 Max PSI | Less Hose

When paired hose lines need powered rewind instead of manual crank retrieval, the Coxreels 1275-6-50-E 1275 Series dual hose reel provides a motorized storage solution for medium-pressure service. This electric DC non-explosion proof motor rewind reel is configured for 1" hose I.D., 50 ft hose capacity, and 3000 PSI maximum pressure, making it a practical fit for large-diameter dual hose applications where controlled hose management, floor safety, and equipment organization matter.

The 1275 Series uses dual plumbing with two external fluid paths, two swivel inlets, and two low-profile outlets to support a flat, non-crimping hose wrap. The electric DC rewind helps reduce the effort required to retrieve 1" hose, while the direct gear drive design eliminates chain-driven rewind components. Its welded steel 'A' frame, ribbed steel discs, and permanently lubricated self-aligning pillow block bearings give the reel a rigid platform for service truck, skid, shop, or plant mounting. The 1275-6-50-E is supplied less hose, allowing the buyer to select hose that matches the system pressure, media, temperature, and fittings.

Type: Dual Hose Electric DC Non-explosion Proof Motor Rewind Reel | Series: 1275 Series | Model: 1275-6-50-E | Configuration: Less Hose | Hose I.D.: 1" | Hose O.D.: 1 7/16" | Hose Capacity: 50 ft | Max Pressure: 3000 PSI | Hose Included: No | Ship Weight: 73 lbs | Overall Dimensions: 30.63" W x 22.88" H x 20" L | Mounting Pattern: 16.81" M x 13.75" N | Base: 19" X x 18.88" Y

Features:

• Electric DC motor rewind reduces manual hose retrieval effort when working with large 1" dual hose runs.
• Non-explosion proof motor configuration is intended for compatible non-hazardous locations where explosion-proof motor protection is not required.
• Reliable direct gear drive on motor driven models provides powered rewind without chain-drive components.
• Dual external fluid paths with machined 90° full-flow NPT swivel inlets support paired hose applications from both sides of the reel.
• Electroless nickel plated steel swivel construction is used on 1" models for the larger hose configuration.
• Swivel O-ring seals are supported by Teflon spacers, with Nitrile swivel seals used in the standard configuration.
• Two low-profile outlet risers and an open drum slot help create a non-crimping, flat hose wrap.
• All welded steel 'A' frame construction, ribbed discs with rolled edges, and permanently lubricated self-aligning pillow block bearings support smooth rotation and a rigid mounting base.

Made in USA:

2 Year Warranty

Applications:

• Service truck and skid-mounted systems where powered rewind helps retrieve large paired hose lines between jobs.
• Industrial maintenance and MRO areas that need dual hose storage for medium-pressure equipment service points.
• Dual hydraulic or dual product delivery layouts where two separate hose paths must be managed from one reel frame.
• Fleet, fabrication, and equipment repair facilities where keeping hose off the floor helps improve workflow and reduce trip hazards.
• Stationary shop installations where electric DC rewind is preferred over hand crank operation for repeated hose deployment and retrieval.

FAQs:

• Q: What does 'less hose' mean on the Coxreels 1275-6-50-E?
  A: It means the reel is supplied without hose installed. The buyer must select compatible 1" I.D. hose separately and verify pressure rating, outside diameter, fittings, fluid compatibility, and temperature range before use.
• Q: Is this reel explosion proof?
  A: No. This model is listed as an electric DC non-explosion proof motor rewind reel. It should not be used in hazardous or classified locations that require explosion-proof electrical equipment unless the system is reviewed and approved by qualified personnel.
• Q: What is the advantage of electric DC rewind?
  A: Electric DC rewind helps retrieve hose with less manual effort, which is useful on service trucks, mobile equipment, and remote systems where DC power is available. It is especially helpful when managing larger 1" hose that can be heavy and awkward to wind by hand.
• Q: Can this reel handle 3000 PSI service?
  A: Yes, the reel is rated for up to 3000 PSI. The installed hose, fittings, swivel seals, and complete fluid system must also be rated for the required working pressure and compatible with the media being transferred.
• Q: What type of hose applications does a dual hose reel support?
  A: A dual hose reel manages two hose lines on the same reel. It is commonly selected for paired fluid paths such as dual hydraulic circuits, dual product delivery, or twin-line service applications where two hoses need to deploy and rewind together.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com