Coxreels 1275-6-50-ED Dual Hose Electric DC Explosion Proof Motor Rewind Reel | 1275 Series | 1" Hose Diameter | 2/50' Hose Length | 3000 Max PSI | Less Hose

Built for dual-line hose control on equipment, skids, and maintenance systems using DC power, the Coxreels 1275-6-50-ED is a 1275 Series dual hose electric motor rewind reel with a DC explosion proof motor. Its 1" hose I.D. capacity supports higher-flow hose assemblies than smaller reel configurations, while the 50 ft hose capacity gives operators practical reach without leaving paired hoses loose across the work area. With a 3000 PSI maximum pressure rating, this less-hose reel is suited for compatible medium-pressure applications where hose type, fittings, and fluid compatibility must be selected separately.

The dual hose layout provides two hose paths on one reel body, helping paired lines pay out and rewind together. This is useful for systems where two compatible hose assemblies need to stay organized, such as hydraulic service, product transfer, or equipment-mounted maintenance circuits. The motorized rewind reduces manual handling, while the open drum slot helps the hose wrap flatter and reduces the chance of crimping during repeated use.

Type: Dual Hose Electric Motor Rewind Hose Reel | Series: 1275 Series | Model: 1275-6-50-ED | Configuration: Less Hose | Motor: DC Explosion Proof | Hose I.D.: 1" | Hose O.D.: 1-7/16" | Hose Capacity: 50 ft | Max Pressure: 3000 PSI | Hose Included: No | Overall Dimensions: 30.63" W x 22.88" H x 20" L | Mounting Pattern: 16.81" M x 13.75" N | Base: 19" X x 18.88" Y

Features:

• Dual hose reel configuration keeps two hose lines organized on one reel, reducing clutter around service equipment and workstations.
• DC explosion proof motor rewind supports motorized hose retrieval where a compatible DC power source and hazardous-location motor configuration are required.
• Two external fluid paths with swivel inlets and low-profile outlets help route paired hoses cleanly during payout and rewind.
• Direct gear drive rewind on motorized models provides positive retrieval without chain drive components.
• All-welded steel 'A' frame construction supports stable mounting on skids, service vehicles, equipment platforms, and fixed shop installations.
• Rolled edges and ribbed discs strengthen the drum and help protect hose during storage and rewind.
• Open drum slot allows smoother, flatter hose wrapping to help reduce hose crimping during repeated reel cycles.
• Permanently lubricated, self-aligning pillow block bearings support smooth drum rotation with reduced routine bearing maintenance.

Made in USA:

2 Year Warranty

Applications:

• Equipment-mounted hose systems where two medium-pressure lines need to be stored and rewound together.
• Mobile service skids and fleet maintenance platforms using a compatible DC electrical supply.
• Industrial MRO areas where organized hose storage helps reduce trip hazards and improves housekeeping.
• Hydraulic service applications that require user-selected 1" hose assemblies matched to the system fluid and pressure.
• Manufacturing and process equipment installations where dual hose routing, motorized rewind, and compact storage are required.

FAQs:

• Q: What does 'less hose' mean on the 1275-6-50-ED?
  A: It means the reel is supplied without hose installed. The buyer must select compatible 1" I.D. hose separately, making sure the hose outside diameter, pressure rating, temperature rating, and fluid compatibility match the system.
• Q: What voltage is this DC motor rewind reel?
  A: The supplied title confirms a DC explosion proof motor but does not specify the DC voltage. Confirm the required voltage before ordering or publishing the final listing.
• Q: Does an explosion proof motor make the reel approved for every hazardous location?
  A: No. The motor configuration must match the installation’s hazardous-location classification, electrical code, and safety requirements. A qualified electrical or safety professional should verify the required rating before installation.
• Q: Can this reel be used for hydraulic hose service?
  A: Yes, when the selected hose, fittings, fluid, and working pressure are compatible with the reel's 3000 PSI maximum pressure rating. Because the reel is sold less hose, the hose assembly must be specified separately.
• Q: What should be checked before mounting this reel?
  A: Verify the reel dimensions, mounting pattern, hose bend radius, power source, and clearance for payout and rewind. The mounting surface must support the reel, hose, fittings, and operating loads.

Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.

For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com