Built for mobile equipment, service skids, and fixed maintenance stations that need two hose lines managed together, the Coxreels 1275-6-50-EB is a 1275 Series dual hose motor rewind reel with a 24V DC explosion proof motor. The 1" hose I.D. capacity supports higher-flow hose than smaller reel configurations, while the 50 ft hose capacity gives operators useful reach without leaving excess hose loose across the work area. Rated for 3000 PSI maximum pressure, this less-hose reel is suited for compatible medium-pressure systems where the hose assembly must be selected separately for the fluid, temperature, pressure, and routing requirements of the job.
The dual hose layout provides two external fluid paths through the reel, helping paired lines stay organized during payout and rewind. Its 24V DC motor rewind configuration is especially useful where low-voltage DC power is available, such as mobile service platforms, utility equipment, or battery-powered installations. The open drum slot supports flatter hose wrapping, while the direct gear drive rewind system provides positive motorized retrieval without chain drive components.
Type: Dual Hose Electric Motor Rewind Hose Reel | Series: 1275 Series | Model: 1275-6-50-EB | Configuration: Less Hose | Motor: 24V DC Explosion Proof | Hose I.D.: 1" | Hose O.D.: 1-7/16" | Hose Capacity: 50 ft | Max Pressure: 3000 PSI | Hose Included: No | Overall Dimensions: 30.63" W x 22.88" H x 20" L | Mounting Pattern: 16.81" M x 13.75" N | Base: 19" X x 18.88" Y
Features:
- Dual hose reel configuration manages two hose lines on one reel, reducing clutter where paired hoses must be routed together.
- 24V DC explosion proof motor rewind supports low-voltage DC-powered installations where motorized hose retrieval is required.
- Two external fluid paths with swivel inlets and low-profile outlets help guide each hose path cleanly during payout and rewind.
- Direct gear drive rewind on motor-driven models provides positive rewind action without chain drive components.
- All-welded steel 'A' frame construction supports stable mounting on equipment platforms, skids, service vehicles, or shop installations.
- Rolled edges and ribbed discs strengthen the drum and help protect hose during winding and storage.
- Open drum slot allows smoother, flatter hose wrapping to help reduce hose crimping during repeated reel use.
- Permanently lubricated, self-aligning pillow block bearings support smooth drum rotation with reduced routine bearing maintenance.
Made in USA: 
Applications:
- Mobile service equipment where 24V DC power is available and two medium-pressure hoses need controlled rewind.
- Utility trucks, field service skids, and fleet maintenance platforms using paired hose lines within the reel's pressure rating.
- Industrial maintenance and MRO areas where dual hose storage helps reduce floor hazards and keeps work zones organized.
- Hydraulic service applications where compatible 1" hose assemblies must be selected separately for the system.
- Manufacturing, process, and equipment-build applications requiring a compact dual hose reel with motorized retrieval.
FAQs:
- Q: What does 'less hose' mean on the 1275-6-50-EB?
A: It means the reel is supplied without hose installed. The buyer must provide compatible 1" I.D. hose separately, making sure the hose outside diameter, pressure rating, temperature rating, and fluid compatibility match the application. - Q: When should I choose the 24V DC version instead of a 115V AC model?
A: The 24V DC version is commonly selected when the reel will be powered from a low-voltage DC electrical system, such as a vehicle, mobile skid, or equipment-mounted battery supply. Confirm available voltage and wiring requirements before installation. - Q: Does 'explosion proof motor' mean this reel can be installed in any hazardous location?
A: No. The motor configuration must still match the facility's electrical classification, safety requirements, and local code. Confirm the required hazardous-location rating with a qualified electrical or safety professional before ordering. - Q: Can this reel be used for hydraulic hose service?
A: Yes, when the hose, fittings, fluid, and operating pressure are compatible with the reel's 3000 PSI maximum pressure rating. Because this SKU is less hose, the hose assembly must be selected separately. - Q: What should be checked before mounting this reel?
A: Verify the reel dimensions, mounting pattern, hose bend radius, available electrical supply, and clearance for payout and rewind. The mounting surface must support the reel, hose, fittings, and operating loads.
| LESS HOSE | SIZE INDEX |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| SKU | STANDARD CAP | OPTIONAL CAP. Reducer required |
INLET SWIVEL & OUTLET RISER |
PSI | APRX. LBS. |
|||||
| I.D. | O.D. | FT. | I.D. | O.D. | FT. | |||||
| 1275-6-50-A | 1" | 1 7/16" | 2/50 | 3/4" | 1 1/4" | 2/60 | 1" F NPT | 3,000 | 63 | 5 |
| 1275-6-50-C | 1" | 1 7/16" | 2/50 | 3/4" | 1 1/4" | 2/60 | 1" F NPT | 3,000 | 63 | 5 |
| 1275-6-50-E | 1" | 1 7/16" | 2/50 | 3/4" | 1 1/4" | 2/60 | 1" F NPT | 3,000 | 63 | 5 |
| 1275-6-50-EA | 1" | 1 7/16" | 2/50 | 3/4" | 1 1/4" | 2/60 | 1" F NPT | 3,000 | 63 | 5 |
| 1275-6-50-EB | 1" | 1 7/16" | 2/50 | 3/4" | 1 1/4" | 2/60 | 1" F NPT | 3,000 | 63 | 5 |
| 1275-6-50-ED | 1" | 1 7/16" | 2/50 | 3/4" | 1 1/4" | 2/60 | 1" F NPT | 3,000 | 63 | 5 |
| 1275-6-50-EF | 1" | 1 7/16" | 2/50 | 3/4" | 1 1/4" | 2/60 | 1" F NPT | 3,000 | 63 | 5 |
| 1275-6-50-EJ | 1" | 1 7/16" | 2/50 | 3/4" | 1 1/4" | 2/60 | 1" F NPT | 3,000 | 63 | 5 |
| 1275-6-50-H | 1" | 1 7/16" | 2/50 | 3/4" | 1 1/4" | 2/60 | 1" F NPT | 3,000 | 63 | 5 |
Looking for more information about the Coxreels Rewind Reel? Click here to view the Catalog.
For help choosing the correct Coxreels Rewind Reels, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
