Cleco 8RSA-20BQ Push Button Reverse Inline Screwdriver | 8-Series | 1,800 RPM | 0.5 - 3.3 (ft-lbs) Torque Range

Built for repetitive production fastening where speed and torque capacity need to stay balanced, the Cleco 8RSA-20BQ push button reverse inline screwdriver delivers 1,800 RPM free speed for efficient screw rundown without moving as fast as the highest-speed 8-Series models. Its 0.5 - 3.3 ft-lbs torque range supports light-to-medium assembly tasks that need more torque than the 8RSA-30BQ or 8RSA-40BQ, while the 1/4" hex quick change drive helps operators swap compatible bits quickly at the workstation.

The inline push-to-start body activates the tool when forward pressure is applied, helping reduce extra hand motion during repeated cycles. Push button reverse allows fast screw removal, correction, or light rework without changing tools. With a Clecomatic clutch (a mechanical clutch system used to improve torque repeatability at shutoff), 19.1 SCFM air consumption, and a compact inline layout, the 8RSA-20BQ is well matched to electronics, appliance, aerospace subassembly, automotive trim, and general manufacturing stations where controlled pneumatic screwdriving is part of the daily process.

Type: Pneumatic Inline Screwdriver | Series: 8-Series | Model: 8RSA-20BQ | Throttle Style: Push-to-Start with Push Button Reverse | Drive Type: 1/4" Hex Quick Change | Torque Range: 0.5 - 3.3 ft-lbs | Torque Range: 0.8 - 4.5 Nm | Free Speed: 1,800 RPM | Length: 8.9 in. | Weight: 2.12 lbs. | Side to Center: 0.77 in. | Air Consumption: 19.1 SCFM | Air Inlet: 1/4" NPT | Minimum Hose I.D.: 3/8" | Air Pressure: 90 PSI

Features:

• 1,800 RPM free speed provides efficient rundown while maintaining higher torque capacity than faster 8RSA-BQ models.
• Clecomatic clutch supports repeatable torque shutoff for controlled production screwdriving.
• Push-to-start operation activates the tool through forward pressure, helping operators maintain a consistent fastening rhythm.
• Push button reverse lets users back out screws, correct assemblies, or perform light rework without switching tools.
• 1/4" hex quick change drive supports fast bit changes for assembly stations using multiple screw types or bit styles.
• Compact inline screwdriver body helps improve access at bench, fixture, and production-line workstations.
• Standard equipment includes operating instructions, service manual, suspension bail, and torque springs required to meet the indicated torque range.

Tech Tip: To increase tool performance, extend tool life, and lessen repair costs, use it with a Filter-Regulator-Lubricator FRL)

Applications:

• Appliance assembly: Installing screws in panels, brackets, housings, and light mechanical subassemblies where repeatable torque is required.
• Electronics and electrical production: Fastening covers, components, connectors, and enclosures with controlled low-to-mid torque output.
• Automotive interior and trim stations: Driving screws into clips, covers, brackets, and light interior components during production or rework.
• Aerospace subassembly: Repetitive screw installation in light assembly areas where inline access and clutch-controlled shutoff matter.
• General manufacturing and repair benches: Fixture-based fastening, small-part assembly, inspection, correction, and product rework using pneumatic screwdriver stations.

FAQs:

• Q: How does the 8RSA-20BQ compare with the 8RSA-30BQ and 8RSA-40BQ?
  A: The 8RSA-20BQ runs at 1,800 RPM with a 0.5 - 3.3 ft-lbs torque range. It is slower than the 2,500 RPM 8RSA-30BQ and 3,200 RPM 8RSA-40BQ, but it offers more maximum torque for applications that need stronger fastening with controlled rundown speed.
• Q: What does “BQ” mean on this Cleco screwdriver?
  A: For this model, the BQ configuration uses a 1/4" hex quick-change drive. This allows operators to change compatible screwdriver bits quickly without using a chuck key.
• Q: Is the Cleco 8RSA-20BQ reversible?
  A: Yes. The 8RSA-20BQ includes push-button reverse, allowing the operator to remove screws, correct fastener alignment, or handle light rework without changing tools.
• Q: What air setup is required for this screwdriver?
  A: This model is rated for 90 PSI operation and lists 19.1 SCFM air consumption, a 1/4" NPT air inlet, and a 3/8" minimum hose I.D. The air supply should maintain adequate flow during repeated fastening cycles.
• Q: Can this tool be used for removing stuck screws or bolts?
  A: No. The 8RSA-20BQ is a clutch-controlled pneumatic screwdriver for assembly fastening and light rework. Stuck fasteners, seized screws, and breakaway jobs require a properly selected removal tool such as an impact wrench, drill, or extractor setup.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Need help selecting the correct Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com