Cleco 8RSA-20 Push Button Reverse Inline Screwdriver | 8-Series | 1,800 RPM | 0.5 - 3.3 (ft-lbs) Torque Range | Bit & Finder Drive

Built for repetitive fastening in light-to-medium assembly work, the Cleco 8RSA-20 push button reverse inline screwdriver combines a compact inline body with a 1,800 RPM free speed for efficient rundown on production fasteners. Its 0.5 - 3.3 ft-lbs torque range supports controlled screwdriving where repeatability matters more than high breakaway force, while the Bit & Finder drive helps guide the bit onto the fastener for consistent engagement. The Clecomatic clutch (a mechanical clutch system used to improve torque repeatability at shutoff) makes this 8-Series screwdriver a practical fit for appliance assembly, electronics, aerospace subassembly, and general manufacturing stations.

The inline push-to-start configuration lets the operator activate the tool by applying forward pressure, while push button reverse allows fast removal or correction without changing tools. With 19.1 SCFM air consumption, a 1/4" NPT air inlet, and a compact 0.77" side-to-center distance, the 8RSA-20 is suited for work cells where access, tool balance, and fastening consistency are key buying concerns.

Type: Pneumatic Inline Screwdriver | Series: 8-Series | Model: 8RSA-20 | Throttle Style: Push-to-Start with Push Button Reverse | Drive Type: Bit & Finder | Torque Range: 0.5 - 3.3 ft-lbs | Torque Range: 0.8 - 4.5 Nm | Free Speed: 1800 RPM | Length: 9.5 in. | Weight: 2.12 lbs. | Side to Center: 0.77 in. | Air Consumption: 19.1 SCFM | Air Inlet: 1/4" NPT

Features:

• Compact inline body helps save space at assembly stations and supports integration into repetitive fastening work cells.
• Clecomatic clutch delivers consistent torque accuracy and repeatability for production screwdriving.
• Push-to-start operation activates the tool when forward pressure is applied, helping operators maintain a steady fastening rhythm.
• Push button reverse allows quick fastener removal or correction without switching tools.
• Bit & Finder drive helps guide the bit onto the screw, supporting cleaner engagement in repetitive assembly work.
• Cleco motor construction is built for durable service in light-to-medium assembly environments.
• High parts interchangeability with other Cleco products helps simplify repair and maintenance planning.

Tech Tip: To increase tool performance, extend tool life, and lessen repair costs, use it with a Filter-Regulator-Lubricator FRL)

Applications:

• Appliance assembly: Running screws into housings, panels, brackets, and light mechanical subassemblies where controlled torque is required.
• Electronics and electrical production: Fastening components, covers, and assemblies that benefit from repeatable low-torque screwdriving.
• Aerospace subassembly: Repetitive screw installation in light assembly areas where inline access and torque control are important.
• General manufacturing: Bench assembly, fixture-based fastening, and small-part production using pneumatic screwdriver stations.
• Repair and rework stations: Removing and reinstalling screws during inspection, adjustment, or product correction steps.

FAQs:

• Q: What type of work is the Cleco 8RSA-20 best suited for?
  A: The 8RSA-20 is used for repetitive light-to-medium screwdriving where speed, access, and torque repeatability matter. It is not an impact tool and should not be selected for high-torque bolt removal.
• Q: What does Bit & Finder drive mean?
  A: A Bit & Finder drive uses a bit and finder arrangement to help guide the bit onto the fastener. This can improve alignment during repetitive assembly work, especially when operators are driving many screws per shift.
• Q: Is this model reversible?
  A: Yes. The 8RSA-20 is a push-to-start inline screwdriver with push-button reverse, allowing the operator to back out screws or correct fasteners without changing tools.
• Q: How does a Clecomatic clutch help in assembly work?
  A: The Clecomatic clutch is used to improve torque control and repeatability compared with basic uncontrolled fastening. That makes it useful for assembly jobs where over-tightening or under-tightening can create quality issues.
• Q: What air supply information should I check before ordering?
  A: Confirm that the workstation can supply the required 19.1 SCFM and that the air line connection matches the 1/4" NPT air inlet. A properly sized FRL is also recommended for pneumatic tool performance and service life.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Need help selecting the correct Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com