Cleco 19SCA03Q Collar Reverse Inline Pneumatic Screwdriver | 19 Series | 1,900 RPM | 0.3 - 2.2 (ft-lbs) Torque Range | 1/4" Hex Quick Change Drive

Built for controlled screwdriving in repetitive production environments, the Cleco 19SCA03Q collar reverse inline pneumatic screwdriver gives assembly teams a balance of run-down speed and higher torque capacity within the 19 Series. Its 1,900 RPM free speed supports efficient fastening on small screws, while the 0.3 - 2.2 ft-lbs torque range gives operators more tightening capacity than lower-torque 19 Series models for light manufacturing, appliance assembly, electronics work, and precision bench operations.

This inline screwdriver uses a 1/4" hex quick-change drive, allowing compatible hex bits to be swapped quickly without slowing the work cell. The collar reverse control places direction change at the tool, and the inline body keeps the bit aligned with the fastener for straight-access applications. Cleco’s CLECOmatic clutch is a shut-off style clutch, meaning it stops the tool when the preset torque is reached to help reduce over-tightening and improve fastening consistency.

Type: Inline Pneumatic Screwdriver | Series: 19 Series | Model: 19SCA03Q | Start / Reverse Style: Collar Reverse, Push and Lever Start | Drive Type: 1/4" Hex Quick Change | Torque Range: 0.3 - 2.2 ft-lbs | Free Speed: 1,900 RPM | Length: 9.8" | Weight: 1.5 lbs | Air Inlet: 1/8" NPT | Air Consumption: 11 SCFM | Required Air Pressure: 90 PSI

Features:

• CLECOmatic clutch provides controlled shut-off when the preset torque is reached
• 0.3 - 2.2 ft-lbs torque range supports light-to-medium assembly fastening where repeatability is required
• 1,900 RPM free speed offers a practical balance of run-down rate and torque capacity for production use
• 1/4" hex quick change drive helps reduce bit-change time between fastening tasks.
• Inline configuration supports straight-on screwdriving in fixtures, workstations, and bench assembly layouts
• Collar reverse control allows direction changes without changing grip position or reaching for a remote control
• Push and lever start configuration gives operators flexible starting control depending on the workstation setup
• Grip material is tested to withstand a range of industrial chemicals commonly found in assembly and maintenance areas

Made in USA:

Applications:

• Appliance and product assembly — fastening covers, panels, guards, trim pieces, and light mechanical components at production benches
• Electronics manufacturing — driving screws into enclosures, brackets, chassis parts, and subassemblies within the tool’s torque range
• Aerospace and precision assembly — controlled fastening in fixture-based work where inline access and repeatable shut-off are useful
• Automotive interior and component work — installing small fasteners in plastic, light metal, and bracketed assemblies where impact tools are too aggressive
• Industrial MRO benches — repetitive disassembly and reassembly of panels, guards, fixtures, and small equipment components using compatible 1/4" hex bits

FAQs:

• Q: How does the 19SCA03Q differ from faster 19 Series models?
  A: The 19SCA03Q runs at 1,900 RPM and offers a 0.3 - 2.2 ft-lbs torque range. Compared with faster, lower-torque versions, it trades some free speed for additional fastening capacity.
• Q: What does collar reverse mean on this Cleco screwdriver?
  A: Collar reverse means the operator changes forward or reverse direction using a collar-style control on the tool. This is useful when the same workstation requires both screw installation and removal.
• Q: What is a CLECOmatic clutch?
  A: CLECOmatic refers to Cleco’s shut-off clutch system. It stops the tool when the preset torque is reached, helping improve fastening consistency compared with a basic stall screwdriver.
• Q: What screwdriver bits work with the 19SCA03Q?
  A: This model uses a 1/4" hex quick change drive. Use compatible 1/4" hex bits matched to the screw head style, fastener material, and required torque setting.
• Q: Is this tool intended for large bolts or high-torque service work?
  A: No. The 19SCA03Q is a precision assembly screwdriver with a 0.3 - 2.2 ft-lbs torque range. Large bolts, lug nuts, and seized fasteners require a nutrunner or impact wrench sized for that job.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Need help selecting the correct Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com