Cleco 19PTS05Q P-Handle Pneumatic Screwdriver | Trigger Start | 19 Series | 660 RPM | 3.7 (ft-lbs) Max Torque | 1/4" Hex Quick Change Drive

Built for controlled fastening in assembly cells, repair benches, and light manufacturing work, the Cleco 19PTS05Q P-Handle Pneumatic Screwdriver combines a 660 RPM free speed with 3.7 ft-lbs of maximum torque for medium-torque screwdriving where steady run-down speed and hand control matter. The 1/4" hex quick change drive accepts common insert bits and allows faster bit swaps between jobs, while the trigger start P-handle layout gives the operator familiar pistol-style control for repeated fastening tasks.

As a stall-type pneumatic screwdriver, the 19PTS05Q relies on motor stall behavior at the fastener rather than an automatic shut-off clutch. In practical terms, this makes it a straightforward choice for users who want a compact air screwdriver for general assembly, fixture work, and maintenance fastening where final torque control is managed by the operator and application process.

Type: Pneumatic Stall Screwdriver | Series: 19 Series | Model: 19PTS05Q | Handle Type: P-Handle | Start Type: Trigger Start | Drive Size: 1/4" | Drive Type: Hex Quick Change | Max Torque: 3.7 ft-lbs / 5.1 Nm | Free Speed: 660 RPM | Air Inlet: 1/4" | Air Consumption: 11 SCFM | Weight: 1.46 lbs

Features:

• Stall-type pneumatic screwdriver configuration for simple, direct fastening control in assembly and maintenance work.
• 660 RPM free speed supports controlled screw run-down without the excessive speed of higher-RPM precision tools.
• 3.7 ft-lbs / 5.1 Nm maximum torque capacity fits medium fastening jobs in light production, fixture work, and service benches.
• 1/4" hex quick change drive helps reduce bit-change time when switching between fastener types or workstations.
• Trigger start P-handle layout provides familiar pistol-grip actuation for repeated fastening cycles.
• Reversible operation supports both installation and removal of compatible screws and fasteners.
• Part of the Cleco 19 Series pneumatic screwdriver family, which includes multiple handle, start, clutch, bit holder, and quick change configurations.

Made in USA:

Applications:

• General manufacturing assembly — driving screws into housings, brackets, panels, and small fabricated assemblies.
• Appliance and equipment production — repeated fastening on covers, frames, guards, and subassemblies where pneumatic tools are preferred.
• Automotive and transportation interiors — installing trim fasteners, clips, covers, and light hardware in bench or line-side work.
• Maintenance and MRO benches — removing and replacing screws during tool repair, equipment service, and fixture maintenance.
• Fixture and workstation fastening — use in jigs, test stands, and controlled work cells where a compact P-handle screwdriver is easier to position than a drill or impact tool.

FAQs:

• Q: What does “stall screwdriver” mean?
  A: A stall screwdriver slows and stalls as resistance increases at the fastener. Unlike an auto shut-off clutch screwdriver, final torque control depends more on the operator, air pressure, and the fastening process.
• Q: What bits fit the Cleco 19PTS05Q?
  A: This model uses a 1/4" hex quick change drive, so it accepts compatible 1/4" hex screwdriver bits. Always match the bit style and length to the fastener and workpiece.
• Q: Is this the same as the 19PTA05Q?
  A: No. The 19PTS05Q is listed as a stall screwdriver with 3.7 ft-lbs maximum torque, while the 19PTA05Q is a related 19 Series P-handle model with a listed torque range. Choose based on the clutch style and torque-control method required by your assembly process.
• Q: What air supply does this screwdriver require?
  A: The listed air consumption is 11 SCFM and the air inlet is 1/4". Use a regulated, lubricated compressed-air supply that matches the tool and plant air requirements.
• Q: Can this tool remove screws as well as install them?
  A: Yes. The 19 Series listing identifies reversible operation, so the tool can be used for compatible screw removal as well as installation.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Need help selecting the correct Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com