Cleco 19PTS03Q P-Handle Pneumatic Screwdriver | Trigger Start | 19 Series | 1,900 RPM | 2.1 (ft-lbs) Max Torque | 1/4" Hex Quick Change Drive

Built for controlled low-torque assembly work, the Cleco 19PTS03Q P-handle pneumatic screwdriver gives production operators a fast, compact fastening tool with 1,900 RPM free speed and 2.1 ft-lbs maximum torque. This mid-speed 19 Series model offers more torque than the 2,800 RPM version while still running quickly enough for repetitive screw rundown on brackets, covers, light housings, trim components, and small assemblies.

The 1/4" hex quick change drive accepts common industrial screwdriver bits and allows fast bit swaps between fastener styles. Its stall clutch stops by motor resistance when the fastener reaches the selected torque level, making it a practical choice for applications where the operator manages final seating by feel. The P-handle layout helps apply forward pressure into prevailing-torque fasteners, including thread-forming and thread-cutting screws that need a steady push force to start cleanly.

Type: Pneumatic Screwdriver | Series: Cleco 19 Series | Model: 19PTS03Q | Handle Style: P-Handle | Start Type: Trigger Start | Clutch Type: Stall | Reverse Style: Sliding Knob Reverse | Drive: 1/4" Hex Quick Change | Free Speed: 1,900 RPM | Max Torque: 26 in-lbs / 2.9 Nm / 2.1 ft-lbs | Overall Length: 6.1" | Air Inlet: 1/4" NPT | Air Pressure: 90 PSI | Air Consumption: 11 SCFM

Features:

• Stall clutch fastening provides straightforward torque control for light assembly jobs where the operator controls final seating.
• 1,900 RPM free speed balances fast rundown with added torque capacity compared with higher-speed 19 Series variants.
• 1/4" hex quick change drive supports common power bits and reduces downtime when switching between screw types.
• Trigger start operation gives the operator direct fingertip control during intermittent or station-based assembly tasks.
• P-handle shape helps the operator apply forward pressure for prevailing-torque, thread-forming, and thread-cutting fasteners.
• Sliding knob reverse allows quick direction changes for installation, removal, or fastener correction.
• Adjustable reverse lever supports one-hand operation for both left- and right-handed users.
• Two interchangeable soft-touch grip sizes help match the handle feel to the operator and workcell preference.

Applications:

• Light manufacturing assembly — fastening covers, brackets, housings, guards, and small mechanical components.
• Appliance and electronics production — driving screws into panels, trim parts, light enclosures, and subassemblies.
• Automotive component assembly — installing interior trim screws, clips, light brackets, and small hardware where controlled torque matters.
• MRO and repair benches — repetitive screw installation and removal for shop maintenance, service work, and rebuild stations.
• General workshop fastening — low-torque pneumatic screwdriving for small assemblies when a properly sized compressed air supply is available.

FAQs:

• Q: What is the difference between the 19PTS03Q and the faster 19PTS02Q?
  A: The 19PTS03Q runs at 1,900 RPM and provides up to 2.1 ft-lbs of torque, while the 19PTS02Q runs faster at 2,800 RPM with lower maximum torque. Choose the 19PTS03Q when the application needs a little more driving force rather than the highest rundown speed.
• Q: What does “stall clutch” mean?
  A: A stall clutch stops as motor resistance increases at the selected torque level. It is a simple clutch style used for many low-torque assembly applications where the operator can manage the final seating of the screw.
• Q: What screwdriver bits fit this tool?
  A: The 19PTS03Q uses a 1/4" hex quick change drive. Use compatible 1/4" hex power bits matched to the screw head style, fastener size, and production requirement.
• Q: Can this screwdriver remove screws as well as install them?
  A: Yes. The sliding knob reverse allows the operator to switch direction for screw removal, correction, or rework tasks.
• Q: What air supply does this Cleco screwdriver need?
  A: This model is listed with a 1/4" NPT air inlet, 90 PSI operating pressure, and 11 SCFM air consumption. Use clean, regulated, lubricated air and confirm the compressor can maintain airflow during repeated production use.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Need help selecting the correct Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com