Cleco 19PTS02Q P-Handle Pneumatic Screwdriver | Trigger Start | 19 Series | 2,800 RPM | 1.5 (ft-lbs) Max Torque | 1/4" Hex Quick Change Drive

Built for light assembly fastening, small hardware installation, and controlled rundown work, the Cleco 19PTS02Q P-handle pneumatic screwdriver combines a 19 Series stall clutch with 2,800 RPM free speed for fast screw seating on low-torque applications. Its 1.5 ft-lbs max torque rating, equivalent to approximately 19 in-lbs / 2.1 Nm, makes it a practical choice for lighter threaded fasteners where speed, repeatability, and handling control matter more than high breakaway force.

The 1/4" hex quick change drive accepts common power bits and allows faster bit swaps between jobs, while the trigger start layout gives the operator familiar fingertip control. The P-handle configuration helps apply forward pressure during fastening, especially when working with thread-forming or thread-cutting screws that require a steady push force into the joint.

Type: Pneumatic Screwdriver | Series: Cleco 19 Series | Model: 19PTS02Q | Handle Style: P-Handle | Start Type: Trigger Start | Clutch Type: Stall | Drive: 1/4" Hex Quick Change | Free Speed: 2,800 RPM | Max Torque: 19 in-lbs / 2.1 Nm / 1.5 ft-lbs | Overall Length: 5.9" / 150 mm | Weight: 1.16 lbs / 0.5 kg | Air Inlet: 1/4" NPT | Minimum Hose I.D.: 3/8" | Air Consumption: 11 SCFM

Features:

• Stall clutch operation stops the tool by motor resistance at the set torque, making it suitable for controlled fastening where the operator manages final seating.
• 2,800 RPM free speed supports fast rundown on small screws and repetitive assembly work.
• 1/4" hex quick change drive allows quick bit changes without a separate chuck key.
• Trigger start control gives the operator familiar, responsive actuation during intermittent fastening tasks.
• P-handle style helps the operator maintain forward pressure during thread-forming, thread-cutting, or push-sensitive fastening jobs.
• External torque adjustment supports faster setup changes when moving between compatible fastener sizes or joint conditions.
• Adjustable reverse lever supports true one-hand operation for left- or right-handed users.
• Two interchangeable soft-touch grip sizes help match the handle feel to operator preference.

Made in USA:

Applications:

• Light manufacturing assembly — driving small screws into housings, brackets, covers, and subassemblies where repeatable low torque is required.
• Electronics and appliance production — fastening panels, guards, trim pieces, and light-duty components without moving to a larger, higher-torque tool.
• Automotive interior and component work — installing small fasteners in dashboards, trim assemblies, light brackets, and accessory components.
• Maintenance and repair benches — repetitive screw removal and installation in shop, MRO, and repair-cell environments.
• DIY garage and workshop use — controlled fastening for small hardware, assemblies, and repair projects when a properly sized air supply is available.

FAQs:

• Q: What does a stall clutch do on this Cleco screwdriver?
  A: A stall clutch stops driving when the tool reaches resistance at the selected torque. It is a simple, durable clutch style often used for low-torque assembly work where the operator can control the final seating of the fastener.
• Q: What bits fit the 19PTS02Q?
  A: This model uses a 1/4" hex quick change drive, so it accepts compatible 1/4" hex power bits. Always match the bit style and length to the screw head and application.
• Q: Is the 1.5 ft-lbs torque rating suitable for larger screws or bolts?
  A: No. The 19PTS02Q is a low-torque assembly screwdriver rated around 19 in-lbs / 2.1 Nm. It is intended for smaller fasteners, not larger bolts or high breakaway fastening tasks.
• Q: What air setup is required?
  A: Manufacturer data lists 11 SCFM, a 1/4" NPT air inlet, and a 3/8" minimum hose I.D. Use a properly sized air line and clean, regulated, lubricated air for consistent performance.
• Q: Why choose the P-handle version instead of an inline screwdriver?
  A: The P-handle shape gives the operator more leverage and forward push force, which can be useful when driving thread-forming or thread-cutting fasteners. Inline models are often preferred when straight-line access and pencil-style handling are more important.

Looking for more information about Cleco Screwdriver? Click here to view the Catalog.

Need help selecting the correct Cleco Screwdrivers for your application? Please call (800) 608-5210 or email info@intlairtool.com