For production grinding and surface preparation tasks that require high abrasive speed with a metric threaded spindle, the Ingersoll Rand M2A120RP95 M2 Series Angle Grinder combines a 1 HP motor with 12,000 RPM free speed, an M14 spindle thread, and rear exhaust. The angle-head configuration supports access to metal surfaces, edges, weld areas, and fabricated components, while the metric spindle arrangement allows the tool to be matched with compatible M14 abrasive mounting hardware.
The Ingersoll Rand M2A120RP95 is a metric-configured M2 Series pneumatic grinder for material removal and surface preparation processes suited to its specified operating capability. Its 12,000 RPM speed supports fast abrasive action when the correct accessory is selected, while the rear exhaust directs discharged air toward the back of the tool and away from the immediate grinding area. Buyers should verify spindle compatibility, abrasive dimensions, mounting requirements, and accessory speed rating before placing the tool into service.
Type: Angle Grinder | Model: M2A120RP95 | Series: M2 Series | Motor Power: 1 HP | Free Speed: 12,000 RPM | Spindle Thread: M14 | Exhaust: Rear
Features:
- 1 HP pneumatic motor provides power for compatible grinding, material removal, and surface preparation operations.
- 12,000 RPM free speed supports fast abrasive operation when the grinder is paired with properly rated accessories.
- M14 metric spindle thread allows use with compatible threaded abrasive accessories and wheel-mounting components.
- Angle-head configuration provides practical access to flat surfaces, edges, weld areas, and other common grinding locations.
- Rear exhaust directs discharged air away from the immediate work area and operator interface.
- Metric configuration supports facilities and applications that use M14-compatible abrasive tooling.
- Pneumatic operation supports repeated grinding tasks when supplied with clean, regulated, and properly conditioned compressed air.
Applications:
- Fabrication shops — grinding edges, removing excess material, and preparing compatible metal surfaces for subsequent processing.
- Weld finishing — cleaning weld areas, removing compatible weld buildup, and blending surface irregularities where the angle-head configuration provides suitable access.
- Foundry operations — cleaning cast surfaces and addressing gates, risers, and other areas appropriate for the selected abrasive and grinder configuration.
- Equipment maintenance — performing grinding and surface preparation on machinery, fabricated parts, and metal components.
- Production metalworking — supporting repeated abrasive processes where 12,000 RPM operation and an M14 metric spindle match the application requirements.
FAQs:
- Q: What does M14 mean on the Ingersoll Rand M2A120RP95?
A: M14 identifies the metric spindle thread configuration. Use only compatible abrasive accessories and mounting hardware that match the spindle, approved accessory dimensions, and grinder speed requirements. - Q: What is the free speed of the M2A120RP95?
A: The grinder has a specified free speed of 12,000 RPM. Any abrasive accessory installed on the tool must be rated for the operating speed and compatible with the required mounting arrangement. - Q: What is the benefit of the rear exhaust configuration?
A: Rear exhaust routes discharged air toward the back of the grinder, helping keep the exhaust stream away from the immediate abrasive contact area and operator interface. - Q: Is the M2A120RP95 intended for metric abrasive tooling?
A: Yes. The supplied product information identifies this model as a metric configuration with an M14 spindle thread. Confirm accessory dimensions, thread compatibility, mounting hardware, and speed rating before installation. - Q: What should be verified when selecting an abrasive accessory?
A: Confirm the accessory type, M14 spindle compatibility, mounting requirements, dimensions, and maximum rated speed. Follow the tool and abrasive manufacturer's instructions for guarding, inspection, installation, and operation.
Available Variations and Specifications
| Model | RPM | Output | Type | Weight kg (lbs.) |
Length mm (in) |
Height Over Spindle End mm (in) |
Air Flow On Load / No Load (L/s) |
Vibration / K (m/s²) |
|---|---|---|---|---|---|---|---|---|
| M2 Series Angle Grinders | ||||||||
| M2A090RP95 | 9,000 | M14 THD | Wire Brush – 5" max | 1.62 (3.56) | 236 (9.29) | 86 (3.39) | 19.8 / 10.4 | 4.6 / 1.6 |
| M2A120RG4 | 12,000 | Collet (6 mm & 1/4") |
Burr | 1.62 (3.56) | 227 (8.94) | 83 (3.28) | 19.8 / 8.0 | 2.3 / 0.8 |
| M2A120RP945 | 12,000 | M14 THD | 4-1/2" × 1/4" wheel – Type 27 | 1.71 (3.76) | 236 (9.29) | 86 (3.39) | 19.8 / 8.0 | 5.1 / 1.5 |
| M2A120RP95 | 12,000 | 5" × 1/4" M14 THD |
5" × 1/4" wheel – Type 27 | 1.77 (3.89) | 236 (9.29) | 86 (3.39) | 19.8 / 8.0 | 5.0 / 0.9 |
| M2A180RG4 | 18,000 | Collet (6 mm & 1/4") |
Burr | 1.62 (3.56) | 227 (8.94) | 83 (3.28) | 19.8 / 11.8 | 3.1 / 1.0 |
| M2 Series Straight Grinders | ||||||||
| M2H180RG4 | 18,000 | Collet (6 mm & 1/4") |
Burr | 0.77 (1.69) | 213 (8.38) | N/A | 19.8 / 6.6 | 4.2 / 1.6 |
| M2H200RG4 | 20,000 | Collet (6 mm & 1/4") |
Burr | 0.77 (1.69) | 213 (8.38) | N/A | 19.8 / 8.0 | 4.4 / 1.1 |
| M2H250RG4 | 25,000 | Collet (6 mm & 1/4") |
Burr | 0.77 (1.69) | 213 (8.38) | N/A | 19.8 / 11.8 | < 2.5 |
| M2 Series Extended Straight Grinders | ||||||||
| M2X180RH63 | 18,000 | 3/8"-24 THD | 3" × 1/2" wheel – Type 1 | 1.48 (3.26) | 339 (13.35) | N/A | 19.8 / 6.6 | < 2.5 |
| M2X075RG4 | 7,500 | Collet (6 mm & 1/4") |
Sanding Drum (Mounted) |
1.35 (2.97) | 304 (11.95) | N/A | 19.8 / 11.8 | < 2.5 |
| M2X180RG4 | 18,000 | Collet (6 mm & 1/4") |
Burr | 1.22 (2.68) | 332 (13.08) | N/A | 19.8 / 6.6 | 2.8 |
| M2X200RG4 | 20,000 | Collet (6 mm & 1/4") |
Burr | 1.22 (2.68) | 332 (13.08) | N/A | 19.8 / 8.0 | < 2.5 |
| M2X250RG4 | 25,000 | Collet (6 mm & 1/4") |
Burr | 1.22 (2.68) | 332 (13.08) | N/A | 19.8 / 11.8 | < 2.5 |
| M2 Series Extended Angle Sanders | ||||||||
| M2L055RS9 | 5,500 | M14 THD | Sanding Pad | 1.90 (4.18) | 318 (12.52) | 91 (3.57) | 19.8 / 11.8 | 3.7 |
| M2L040RS9 | 4,000 | M14 THD | Sanding Pad | 1.90 (4.18) | 318 (12.52) | 91 (3.57) | 19.8 / 6.6 | 2.8 |
| M2L025RS9 | 2,500 | M14 THD | Sanding Pad | 1.90 (4.18) | 318 (12.52) | 91 (3.57) | 19.8 / 8.0 | 4.0 |
Looking for more information about the Ingersoll Rand Grinder? Click here to view the Catalog
For help choosing the correct Ingersoll Rand Grinders for your application, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
