For metalworking applications that require controlled material removal with a metric threaded spindle, the Ingersoll Rand M2A090RP95 M2 Series Angle Grinder combines a 1 HP motor with 9,000 RPM free speed, an M14 spindle thread, and rear exhaust. The angle-head configuration provides practical access to grinding surfaces, edges, and weld areas, while the rear exhaust directs discharged air away from the work area and operator interface.
The Ingersoll Rand M2A090RP95 is a metric-configured M2 Series grinder for compatible threaded abrasive accessories and grinding applications. Its 9,000 RPM speed supports controlled stock removal and surface preparation, while the metric M14 spindle configuration helps buyers match the tool to compatible wheels and accessories. The 1 HP pneumatic motor provides power for production grinding tasks within the tool's specified operating capability.
Type: Angle Grinder | Model: M2A090RP95 | Series: M2 Series | Motor Power: 1 HP | Free Speed: 9,000 RPM | Spindle Thread: M14 | Exhaust: Rear
Features:
- 1 HP pneumatic motor provides power for compatible grinding, surface preparation, and material removal operations.
- 9,000 RPM free speed supports controlled abrasive performance when matched with accessories rated for the tool speed.
- M14 metric spindle thread accommodates compatible threaded abrasive accessories and wheel-mounting hardware.
- Angle-head configuration provides access to flat surfaces, edges, weld areas, and other common grinding locations.
- Rear exhaust directs discharged air away from the immediate work area and operator interface.
- Metric configuration helps buyers select the correct spindle-compatible accessories for facilities using metric abrasive tooling.
- Pneumatic operation supports repeated grinding tasks when the tool is supplied with properly conditioned compressed air.
Applications:
- Weld preparation and cleanup — removing compatible weld buildup, spatter, and surface irregularities before subsequent fabrication steps.
- Metal fabrication — grinding edges, preparing surfaces, and removing excess material from compatible metal components.
- Foundry and casting work — cleaning cast surfaces and addressing gates, risers, and other areas suited to the grinder's configuration.
- Maintenance and repair operations — performing controlled grinding and surface preparation on machinery and fabricated components.
- Production metalworking — supporting repeated abrasive operations where a 9,000 RPM metric-spindle angle grinder matches the process requirements.
FAQs:
- Q: What does the M14 specification mean on the M2A090RP95?
A: M14 identifies the metric spindle thread used to mount compatible threaded abrasive accessories or wheel hardware. Verify the complete accessory mounting requirements and maximum rated speed before use. - Q: What is the free speed of the Ingersoll Rand M2A090RP95?
A: The grinder has a specified free speed of 9,000 RPM. Any wheel or abrasive accessory used with the tool must be compatible with the mounting configuration and rated for at least the grinder's operating speed. - Q: What is the benefit of rear exhaust on this angle grinder?
A: Rear exhaust routes discharged air toward the back of the tool, helping keep the exhaust stream away from the immediate grinding area and operator interface. - Q: Is the M2A090RP95 intended for metric abrasive accessories?
A: Yes. The supplied product information identifies this model as a metric configuration with an M14 spindle thread. Confirm accessory thread, dimensions, mounting hardware, and speed rating before installation. - Q: How should abrasive accessories be selected for this grinder?
A: Use only accessories that match the M14 mounting configuration, the grinder's approved wheel or accessory dimensions, and the required speed rating. Follow the tool and abrasive manufacturer's installation, guarding, inspection, and operating instructions.
Available Variations and Specifications
| Model | RPM | Output | Type | Weight kg (lbs.) |
Length mm (in) |
Height Over Spindle End mm (in) |
Air Flow On Load / No Load (L/s) |
Vibration / K (m/s²) |
|---|---|---|---|---|---|---|---|---|
| M2 Series Angle Grinders | ||||||||
| M2A090RP95 | 9,000 | M14 THD | Wire Brush – 5" max | 1.62 (3.56) | 236 (9.29) | 86 (3.39) | 19.8 / 10.4 | 4.6 / 1.6 |
| M2A120RG4 | 12,000 | Collet (6 mm & 1/4") |
Burr | 1.62 (3.56) | 227 (8.94) | 83 (3.28) | 19.8 / 8.0 | 2.3 / 0.8 |
| M2A120RP945 | 12,000 | M14 THD | 4-1/2" × 1/4" wheel – Type 27 | 1.71 (3.76) | 236 (9.29) | 86 (3.39) | 19.8 / 8.0 | 5.1 / 1.5 |
| M2A120RP95 | 12,000 | 5" × 1/4" M14 THD |
5" × 1/4" wheel – Type 27 | 1.77 (3.89) | 236 (9.29) | 86 (3.39) | 19.8 / 8.0 | 5.0 / 0.9 |
| M2A180RG4 | 18,000 | Collet (6 mm & 1/4") |
Burr | 1.62 (3.56) | 227 (8.94) | 83 (3.28) | 19.8 / 11.8 | 3.1 / 1.0 |
| M2 Series Straight Grinders | ||||||||
| M2H180RG4 | 18,000 | Collet (6 mm & 1/4") |
Burr | 0.77 (1.69) | 213 (8.38) | N/A | 19.8 / 6.6 | 4.2 / 1.6 |
| M2H200RG4 | 20,000 | Collet (6 mm & 1/4") |
Burr | 0.77 (1.69) | 213 (8.38) | N/A | 19.8 / 8.0 | 4.4 / 1.1 |
| M2H250RG4 | 25,000 | Collet (6 mm & 1/4") |
Burr | 0.77 (1.69) | 213 (8.38) | N/A | 19.8 / 11.8 | < 2.5 |
| M2 Series Extended Straight Grinders | ||||||||
| M2X180RH63 | 18,000 | 3/8"-24 THD | 3" × 1/2" wheel – Type 1 | 1.48 (3.26) | 339 (13.35) | N/A | 19.8 / 6.6 | < 2.5 |
| M2X075RG4 | 7,500 | Collet (6 mm & 1/4") |
Sanding Drum (Mounted) |
1.35 (2.97) | 304 (11.95) | N/A | 19.8 / 11.8 | < 2.5 |
| M2X180RG4 | 18,000 | Collet (6 mm & 1/4") |
Burr | 1.22 (2.68) | 332 (13.08) | N/A | 19.8 / 6.6 | 2.8 |
| M2X200RG4 | 20,000 | Collet (6 mm & 1/4") |
Burr | 1.22 (2.68) | 332 (13.08) | N/A | 19.8 / 8.0 | < 2.5 |
| M2X250RG4 | 25,000 | Collet (6 mm & 1/4") |
Burr | 1.22 (2.68) | 332 (13.08) | N/A | 19.8 / 11.8 | < 2.5 |
| M2 Series Extended Angle Sanders | ||||||||
| M2L055RS9 | 5,500 | M14 THD | Sanding Pad | 1.90 (4.18) | 318 (12.52) | 91 (3.57) | 19.8 / 11.8 | 3.7 |
| M2L040RS9 | 4,000 | M14 THD | Sanding Pad | 1.90 (4.18) | 318 (12.52) | 91 (3.57) | 19.8 / 6.6 | 2.8 |
| M2L025RS9 | 2,500 | M14 THD | Sanding Pad | 1.90 (4.18) | 318 (12.52) | 91 (3.57) | 19.8 / 8.0 | 4.0 |
Looking for more information about the Ingersoll Rand Grinder? Click here to view the Catalog
For help choosing the correct Ingersoll Rand Grinders for your application, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
