Ingersoll Rand 77H30B106 Extended Straight Grinder | 1.5 HP | 3,000 RPM | 5/8"-11 x 2 Thread | Side Exhaust

Ingersoll Rand 77H30B106 Extended Straight Grinder is a pneumatic grinding tool configured with an extended reach for material removal applications where additional access between the operator and the work surface is beneficial. Powered by a 1.5 HP motor and operating at 3,000 RPM, this model features a 5/8"-11 x 2 threaded spindle configuration for use with compatible grinding accessory setups.

Ingersoll Rand 77H30B106 combines its extended straight configuration with a lower 3,000 RPM operating speed for applications suited to this speed and spindle arrangement. The side exhaust configuration routes discharged air through the side of the tool, while buyers should verify that the intended accessory and mounting setup are compatible with the specified 5/8"-11 x 2 thread configuration and operating speed.

Type: Extended Straight Grinder | Power: 1.5 HP | Speed: 3,000 RPM | Thread: 5/8"-11 x 2 | Exhaust: Side Exhaust

Features:

• 1.5 HP pneumatic motor provides the specified power output for compatible grinding and material removal applications.
• 3,000 RPM operating speed supports accessory setups designed and rated for this rotational speed.
• 5/8"-11 x 2 thread configuration provides the specified mounting arrangement for compatible accessories.
• Extended straight configuration provides additional reach compared with a standard straight grinder profile.
• Straight tool layout supports direct positioning when accessing recessed or less accessible work areas.
• Side exhaust routes discharged air through the side of the tool.

Applications:

• Grinding and material removal tasks where an extended straight tool configuration improves access to the work area.
• Surface preparation and cleanup in recessed locations that may be difficult to reach with a standard-length grinder.
• Work on fabricated components and assemblies using compatible accessories matched to the tool's thread configuration and operating speed.
• Production and repair operations requiring a 1.5 HP pneumatic grinder with extended reach and a 3,000 RPM speed rating.

FAQs:

• Q: What is the operating speed of the Ingersoll Rand 77H30B106?
  A: The 77H30B106 is specified to operate at 3,000 RPM.
• Q: What is the benefit of the extended straight configuration?
  A: The extended configuration provides additional reach, which can help position the grinding accessory in recessed or less accessible work areas.
• Q: What thread configuration is specified for this grinder?
  A: The provided product information specifies a 5/8"-11 x 2 thread configuration. Compatible accessories and mounting components should be selected to match this specification.
• Q: Where does the 77H30B106 exhaust air?
  A: This model uses a side exhaust configuration.
• Q: What should be checked before selecting an accessory for this grinder?
  A: Verify that the accessory and mounting arrangement are compatible with the specified 5/8"-11 x 2 thread configuration and are rated for operation at 3,000 RPM.

Looking for more information about the Ingersoll Rand Grinder? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Grinders for your application, please call (800) 608-5210 or email info@intlairtool.com