Ingersoll Rand 5RLN2C6 Angle Air Nutrunner is designed for controlled fastening in production and assembly environments where repeatable torque and operator comfort are essential. Featuring a 15.0–110.6 in-lbs torque range, a 3/8-inch square drive, and a 600 RPM free speed, this pneumatic nutrunner delivers reliable performance for medium-duty fastening applications. Its ergonomic angle-head configuration improves access to fasteners in confined workspaces, while the lever-start throttle provides smooth, responsive operation during repetitive assembly tasks.
Engineered for dependable production performance, the 5RLN2C6 combines precise pneumatic power with a compact angle-head design that helps reduce operator fatigue while improving accessibility. The 3/8-inch square drive accommodates compatible sockets, making the tool well suited for a variety of industrial fastening applications requiring consistent torque delivery.
Tool Type: Angle Air Nutrunner | Torque Range: 15.0–110.6 in-lbs | Drive Size: 3/8" Square | Free Speed: 600 RPM | Throttle: Lever Start
|
Features:
|
|
Made in USA: 
Applications:
- Automotive and transportation component assembly.
- Industrial manufacturing and production lines.
- Appliance and consumer product assembly.
- General mechanical assembly requiring repeatable torque control.
- Assembly stations where an angle-head tool improves fastener accessibility.
FAQs:
- Q: What type of sockets does this tool use?
A: The 5RLN2C6 features a 3/8-inch square drive designed for use with compatible 3/8-inch square drive sockets. - Q: What is the benefit of the angle-head design?
A: The angle-head configuration improves access to fasteners located in confined or difficult-to-reach spaces where straight tools may not fit comfortably. - Q: What does the 600 RPM free speed indicate?
A: It represents the tool's rotational speed under no-load conditions, allowing efficient fastener run-down during assembly operations. - Q: What applications is this nutrunner intended for?
A: It is designed for repetitive industrial fastening applications requiring controlled torque in manufacturing, assembly, and production environments.
| SKU | Torque Range | Torque Range | Free Speed | Weight | Length | Side to Center | Head Height | Drive |
|---|---|---|---|---|---|---|---|---|
| IN-LBS (NM) | IN-LBS (NM) | RPM | LBS (KG) | IN (MM) | IN (MM) | IN (MM) | IN | |
| 5 Series Lever Start | ||||||||
| 5RLK2C5 | 10 – 40 (1.14 – 4.55) |
15 – 35 (1.71 – 3.98) |
1,800 | 3.1 (1.4) |
12.4" (315) |
0.52" (13.2) |
1.3" (33.0) |
1/4" |
| 5RLK2C3 | 10 – 40 (1.14 – 4.55) |
15 – 35 (1.71 – 3.98) |
1,800 | 3.1 (1.4) |
12.4" (315) |
0.52" (13.2) |
0.5" (12.7) |
1/4" |
| 5RLL2C5 | 15 – 55 (1.7 – 6.3) |
20 – 55 (2.28 – 6.26) |
1,300 | 3.1 (1.4) |
12.4" (315) |
0.52" (13.2) |
1.3" (33.0) |
1/4" |
| 5RLN2C3 | 15 – 80.5 (1.7 – 9.1) |
50.4 – 110.6 (5.69 – 12.51) |
600 | 3.1 (1.4) |
13.1" (330) |
0.52" (13.2) |
0.5" (12.7) |
1/4" |
| 5RLN2C6 | 15.0 – 80.5 (1.7 – 9.1) |
50.4 – 110.6 (5.7 – 12.51) |
600 | 3.4 (1.5) |
13.1" (330) |
0.52" (13.2) |
1.3" (33.0) |
3/8" |
| 7 Series Lever Start | ||||||||
| 7RLL2C6 | 25 – 80 (2.84 – 9.10) |
25 – 100 (2.84 – 12.51) |
1,400 | 3.3 (1.5) |
13.2" (335) |
0.52" (13.2) |
1.3" (33.0) |
3/8" |
| 7RLL3C6 | 25 – 80 (2.84 – 9.10) |
25 – 110 (2.84 – 12.51) |
1,400 | 4.8 (2.2) |
14.3" (363) |
0.54" (13.7) |
1.5" (38.1) |
3/8" |
| 7RLM3C6 | 25 – 90 (2.84 – 10.24) |
25 – 130 (2.84 – 14.79) |
800 | 5.0 (2.3) |
14.3" (363) |
0.54" (13.7) |
1.5" (38.1) |
3/8" |
Looking for more information about the Ingersoll Rand Nutrunner? Click here to view the Catalog
For help choosing the correct Ingersoll Rand Nutrunners for your application, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
