Ingersoll Rand 50190404 5" Asphalt Cutter | 12" Under Collar Length | 1" x 4 - 1/4" Hex Shank

For pavement maintenance projects where damaged asphalt must be cut and removed before repairs can begin, the Ingersoll Rand 50190404 5-inch Asphalt Cutter provides a broad cutting profile for compatible pneumatic pavement breakers. This construction steel accessory features a 5-inch cutting width, 12-inch under-collar length, and 1-inch x 4-1/4-inch hex shank. Its wide blade allows the breaker's repeated impacts to act along an extended cutting edge, helping operators separate asphalt sections during roadway repairs, parking lot maintenance, and utility access work. Ingersoll Rand specifically identifies this cutter style for asphalt cutting and removal, distinguishing it from pointed demolition steels and narrow chisels used for other breaking tasks.

The 50190404 weighs 7.25 lbs and incorporates a collared hex shank for use with equipment accepting the corresponding connection and retention arrangement. Its 12-inch length under the collar identifies the working steel measurement below the retaining collar, rather than the complete end-to-end length. Within the Ingersoll Rand 5-inch Asphalt Cutter family, this model provides an alternative to the smaller 7/8-inch shank configuration and the larger 1-1/8-inch and 1-1/4-inch versions. Selecting the correct shank is essential because cutting width alone does not establish compatibility with a pavement breaker.

Type: Pneumatic Pavement Breaker Asphalt Cutter | Manufacturer: Ingersoll Rand | Part Number: 50190404 | Cutting Width: 5" | Length Under Collar: 12" | Shank Type: Hex | Hex Shank Size: 1" x 4-1/4" | Weight: 7.25 lbs | Catalog Box Quantity: 5 | Application: Asphalt Cutting and Removal

Features:

• 5-inch cutting width provides a broad blade profile specifically suited to asphalt cutting and removal.
• 1-inch x 4-1/4-inch hex shank accommodates compatible pneumatic pavement breakers requiring this particular steel connection.
• 12-inch under-collar length provides a manufacturer-defined dimension for matching replacement cutters.
• 7.25 lb catalog weight helps distinguish this configuration from adjacent shank sizes in the asphalt cutter range.
• Collared shank configuration works with the appropriate pavement breaker retaining mechanism when properly matched to the tool.
• Wide cutting edge supports the separation of asphalt pavement during removal, patching, and surface repair operations.
• Listed in the Ingersoll Rand Pavement Breaker and Digger Steels range, with additional shank sizes available for different equipment requirements.

Note: Other Ingersoll Rand Steels and accessories include Bushing tools, Moil Points, Spark-Resistant Chisels, Blanks, Capes, Gouges, Round Noses, Fullers, Caulkings, Ripper Chisels, Tooth Chisels, Paper Box Stripping Chisels, Carbide-Tipped Drill Steels, Jack Rods, Bits, Diamond Points, Clay Spades, Couplers, Drivers, Hoses, Lock Clips, Lock Springs, Retainers, Rubber Bumpers, Shanks, Steels and Washers etc.

Applications:

• Municipal roadway repairs – cutting damaged asphalt sections before patching or pavement replacement.
• Parking lot maintenance – separating deteriorated asphalt around repair areas and surface defects.
• Underground utility access – opening asphalt pavement for water, drainage, electrical, or communication service repairs.
• Commercial site renovation – removing asphalt around entrances, access roads, and paved work areas with compatible pneumatic breakers.
• Driveway reconstruction – breaking and separating existing asphalt surfaces before excavation or installation of replacement paving.

FAQs:

• Q: What is the Ingersoll Rand 50190404 Asphalt Cutter used for?

  A: It is a pavement breaker steel specifically listed by Ingersoll Rand for asphalt cutting and removal. The 5-inch blade provides a broad cutting edge for separating asphalt during road maintenance, repair, and demolition work.

• Q: How can I determine whether the 50190404 fits my pavement breaker?

  A: Check that your breaker accepts a 1-inch x 4-1/4-inch hex shank with the corresponding collar and retention configuration. The tool manufacturer's accessory specifications should be used to verify compatibility before ordering.

• Q: What is the difference between the Ingersoll Rand 50190404 and 22040935?

  A: Both cutters have a 5-inch cutting width and 12-inch under-collar length. The 50190404 uses a 1-inch x 4-1/4-inch hex shank and weighs 7.25 lbs, whereas the 22040935 uses a 7/8-inch x 3-1/4-inch hex shank and weighs 6.75 lbs. The required breaker shank configuration determines which model to select.

• Q: Is the 12-inch under-collar length the same as the cutter's overall length?

  A: No. Under-collar length measures from beneath the retaining collar toward the cutting end of the steel. The manufacturer's catalog does not separately provide the complete overall length for this SKU.

• Q: Does the box quantity of five mean I receive five asphalt cutters?

  A: Ingersoll Rand specifies a catalog box quantity of five for part number 50190404. This describes the manufacturer's packaging quantity, not necessarily the distributor's sales unit. Confirm whether the listing is priced individually or by the box before ordering.

Looking for more information about Ingersoll Rand Asphalt Cutter? Click here to view the Catalog

For help selecting the correct Ingersoll Rand Asphalt Cutters, please call (800) 608-5210 or email info@intlairtool.com