Ingersoll Rand 22040935 5" Asphalt Cutter | 12" Under Collar Length | 7/8" x 3 - 1/4" Hex Shank

For road repair crews and contractors removing existing asphalt surfaces, the Ingersoll Rand 22040935 Asphalt Cutter provides a broad cutting edge for use with compatible pneumatic pavement breakers. Featuring a 5-inch cutting width, 12-inch under-collar length, and 7/8-inch x 3-1/4-inch hex shank, this construction steel accessory is specifically listed by Ingersoll Rand for asphalt cutting and removal. Its wide blade helps concentrate the breaker's repeated impact along a defined cutting edge, making it suitable for separating asphalt sections during pavement maintenance, roadway repairs, and surface removal operations.

The 6.75 lb cutter incorporates a collared hex shank for installation in pavement-breaking equipment accepting the specified steel dimensions and retention arrangement. The 12-inch under-collar measurement describes the length below the retaining collar toward the cutting end, rather than the overall accessory length. Compared with narrow chisels or pointed demolition steels, the 5-inch asphalt cutter presents a wider cutting profile for working through asphalt surfaces. This configuration is particularly relevant when selecting replacement steels for pavement breakers used in road maintenance and construction projects. Correct shank dimensions are essential because similarly shaped asphalt cutters are available with different tool connections.

Type: Pneumatic Pavement Breaker Asphalt Cutter | Manufacturer: Ingersoll Rand | Part Number: 22040935 | Cutting Width: 5" | Length Under Collar: 12" | Shank Type: Hex | Hex Shank Size: 7/8" x 3-1/4" | Weight: 6.75 lbs | Catalog Box Quantity: 5 | Application: Asphalt Cutting and Removal

Features:

• 5-inch asphalt cutter profile provides a broad cutting edge for asphalt cutting and removal operations.
• 7/8-inch x 3-1/4-inch hex shank matches pavement-breaking tools accepting this specific shank configuration.
• 12-inch under-collar length provides a defined working steel dimension for replacement accessory selection.
• 6.75 lb catalog weight distinguishes this cutter from larger-shank variations in the same product family.
• Collared shank construction accommodates a compatible pavement breaker's steel-retention system.
• Wide blade configuration supports asphalt separation during pavement repair and removal work.
• Available in multiple hex shank sizes within the Ingersoll Rand construction steels catalog to accommodate different pavement breaker requirements.

Note: Other Ingersoll Rand Steels and accessories include Bushing tools, Moil Points, Spark-Resistant Chisels, Blanks, Capes, Gouges, Round Noses, Fullers, Caulkings, Ripper Chisels, Tooth Chisels, Paper Box Stripping Chisels, Carbide-Tipped Drill Steels, Jack Rods, Bits, Diamond Points, Clay Spades, Couplers, Drivers, Hoses, Lock Clips, Lock Springs, Retainers, Rubber Bumpers, Shanks, Steels and Washers etc.

Applications:

• Roadway maintenance – cutting and removing damaged asphalt pavement during street repair projects.
• Parking lot rehabilitation – breaking asphalt sections scheduled for patching, replacement, or resurfacing preparation.
• Utility construction – opening asphalt surfaces for access to underground services before excavation.
• Driveway and pathway renovation – removing existing asphalt sections using compatible pneumatic breaking equipment.
• Municipal public works – carrying out localized asphalt removal around roadway repairs and infrastructure maintenance projects.

FAQs:

• Q: What is the Ingersoll Rand 22040935 Asphalt Cutter used for?

  A: The manufacturer identifies this cutter for asphalt cutting and removal. It is a working steel accessory fitted to a compatible pneumatic pavement breaker and is used to separate or break sections of asphalt during construction and repair work.

• Q: Will the 22040935 fit my pneumatic pavement breaker?

  A: The breaker must accept a 7/8-inch x 3-1/4-inch hex shank and the corresponding collar and retainer configuration. Confirm the manufacturer's accessory requirements before ordering, since a matching cutting width alone does not guarantee fit.

• Q: Does the 12-inch length include the entire chisel?

  A: No. The catalog identifies 12 inches as the length under the collar. This is distinct from the overall end-to-end length, which is not specified in the supplied construction steels catalog.

• Q: What is the difference between the 22040935 and 50190404 asphalt cutters?

  A: Both have a 5-inch cutting width and 12-inch under-collar length. The 22040935 has a 7/8-inch x 3-1/4-inch hex shank and weighs 6.75 lbs, while the 50190404 uses a 1-inch x 4-1/4-inch hex shank and weighs 7.25 lbs. Select the version required by your pavement breaker.

• Q: Is the Ingersoll Rand 22040935 sold as a single cutter or a box of five?

  A: The manufacturer's catalog lists a box quantity of five. This packaging information does not establish whether the distributor sells the item individually or by the box. Confirm the sales unit before ordering.

Looking for more information about Ingersoll Rand Asphalt Cutter? Click here to view the Catalog

For help selecting the correct Ingersoll Rand Asphalt Cutters, please call (800) 608-5210 or email info@intlairtool.com