Ingersoll Rand 50185982 5" Asphalt Cutter | 12" Under Collar Length | 1 - 1/8" x 6" Hex Shank

When asphalt pavement needs to be opened or removed using pneumatic breaking equipment, the Ingersoll Rand 50185982 5" Asphalt Cutter provides a wide cutting edge for roadway maintenance and construction work. The cutter features a 5-inch cutting width, 12-inch under-collar length, and 1-1/8-inch x 6-inch hex shank. Intended for asphalt cutting and removal, this pavement breaker steel concentrates repeated tool impacts along its broad blade to help separate asphalt surfaces during demolition, pavement rehabilitation, and utility access operations. The hex shank configuration makes it suitable for breakers that accept the corresponding shank dimensions and retaining arrangement.

With a manufacturer-listed 8.5 lb weight, the 50185982 occupies a specific position within Ingersoll Rand's four-variation, 5-inch asphalt cutter range. Its collared shank provides the retention interface for compatible pavement breakers, while the 12-inch under-collar measurement identifies the length below the collar toward the working end. Compared with the 50190404, which uses a 1-inch x 4-1/4-inch hex shank, this model has a larger 1-1/8-inch x 6-inch connection while retaining the same blade width and under-collar length. Selecting the correct shank size is essential for proper fit and safe operation.

Type: Pneumatic Pavement Breaker Asphalt Cutter | Manufacturer: Ingersoll Rand | Part Number: 50185982 | Cutting Width: 5" | Length Under Collar: 12" | Shank Type: Hex | Hex Shank Size: 1-1/8" x 6" | Weight: 8.5 lbs | Catalog Box Quantity: 5 | Application: Asphalt Cutting and Removal

Features:

• 5-inch cutting width provides a broad blade profile for cutting and separating asphalt pavement.
• 1-1/8-inch x 6-inch hex shank accommodates compatible pavement breakers requiring this specific connection size.
• 12-inch under-collar length provides a manufacturer-defined measurement for identifying the correct replacement steel.
• 8.5 lb catalog weight distinguishes this configuration from the smaller and larger shank variations in the asphalt cutter family.
• Collared shank construction provides the specified retention arrangement when used with a matching pavement breaker.
• Wide cutting edge supports asphalt removal during localized road repairs and pavement reconstruction.
• Listed in the Ingersoll Rand Pavement Breaker and Digger Steels range, alongside alternative shank sizes for different equipment requirements.

Note: Other Ingersoll Rand Steels and accessories include Bushing tools, Moil Points, Spark-Resistant Chisels, Blanks, Capes, Gouges, Round Noses, Fullers, Caulkings, Ripper Chisels, Tooth Chisels, Paper Box Stripping Chisels, Carbide-Tipped Drill Steels, Jack Rods, Bits, Diamond Points, Clay Spades, Couplers, Drivers, Hoses, Lock Clips, Lock Springs, Retainers, Rubber Bumpers, Shanks, Steels and Washers etc.

Applications:

• Road construction and repair – cutting existing asphalt surfaces before removing damaged pavement or preparing repair areas.
• Utility trench access – opening asphalt pavement where underground water, electrical, or communication services require maintenance.
• Parking area reconstruction – separating asphalt around deteriorated sections scheduled for removal or replacement.
• Municipal infrastructure maintenance – carrying out asphalt breakout work on streets, service roads, and other paved public areas.
• Commercial paving projects – removing portions of asphalt driveways, access routes, and paved work areas with compatible pneumatic breakers.

FAQs:

• Q: What is the Ingersoll Rand 50185982 Asphalt Cutter used for?

  A: Ingersoll Rand identifies this construction steel specifically for asphalt cutting and removal. Its 5-inch blade works with a compatible pneumatic pavement breaker to separate sections of asphalt during roadwork, demolition, and surface repairs.

• Q: Which pavement breakers can use the 50185982?

  A: The pavement breaker must accept a 1-1/8-inch x 6-inch hex shank with the corresponding collar and retaining mechanism. Exact tool compatibility should be confirmed against the breaker's manufacturer specifications before ordering.

• Q: How does the 50185982 differ from the Ingersoll Rand 50190404?

  A: Both cutters have a 5-inch cutting width and 12-inch under-collar length. The 50185982 uses a 1-1/8-inch x 6-inch hex shank and weighs 8.5 lbs, while the 50190404 uses a 1-inch x 4-1/4-inch hex shank and weighs 7.25 lbs. Their different shank dimensions determine which breaker configuration they fit.

• Q: What does the 12-inch under-collar length indicate?

  A: It is the manufacturer's measurement from below the retaining collar toward the blade end. It is not the same as the cutter's overall end-to-end length, which is not separately specified in the catalog.

• Q: Is the 50185982 supplied individually or in a box of five?

  A: The manufacturer's catalog lists a box quantity of five for this part number. However, the catalog packaging quantity does not establish the distributor's selling unit. Verify whether the product is priced per cutter or per box before ordering.

Looking for more information about Ingersoll Rand Asphalt Cutter? Click here to view the Catalog

For help selecting the correct Ingersoll Rand Asphalt Cutters, please call (800) 608-5210 or email info@intlairtool.com