Ingersoll Rand 2130 Pneumatic Impact Wrench | 1/2" Square Drive | 9500 RPM | 550 (ft-lbs) Max Torque | Trigger Start

For tire changes, general vehicle repairs, and everyday mechanical maintenance, the Ingersoll Rand 2130 Pneumatic Impact Wrench delivers reliable fastening and loosening power in a compact pistol grip configuration. Equipped with a 1/2" square drive, this air impact wrench produces up to 550 ft-lbs (745 Nm) of maximum torque, providing the force needed to remove stubborn wheel nuts, machinery bolts, and other automotive fasteners. Its 50–500 ft-lbs (68–680 Nm) working torque range covers various service applications, while the 9,500 RPM free speed (socket rotation speed without load) helps accelerate fastener rundown. A powerful twin-hammer impact mechanism delivers repeated rotational blows, allowing technicians to loosen and tighten fasteners without manually applying the full turning force.

The Ingersoll Rand 2130 combines a durable steel hammer case with a composite housing that helps withstand repeated drops, chemical exposure, and demanding workshop conditions. Its full-stroke tease throttle provides progressive speed control through trigger pressure, while a multi-position power management system allows adjustment of torque output for different fastening operations. A silenced through-handle exhaust directs discharged air away from the working area. Weighing 4.2 lbs (1.9 kg) and measuring 7.25" (184 mm) long, the wrench offers a manageable configuration for automotive service technicians and maintenance personnel. With 22 CFM air consumption at load, a 1/4" NPT air inlet, and a 3/8" minimum hose diameter, the 2130 can be paired with an appropriately sized compressed-air system for regular vehicle and equipment servicing.

Type: Pneumatic Impact Wrench | Model: 2130 | Handle: Pistol Grip | Actuation: Trigger Start | Drive Size: 1/2" | Drive Type: Square | Impact Mechanism: Twin Hammer | Maximum Torque: 550 ft-lbs (745 Nm) | Working Torque Range: 50–500 ft-lbs (68–680 Nm) | Free Speed: 9,500 RPM | Blows Per Minute: 1,200 | Weight: 4.2 lbs (1.9 kg) | Length: 7.25" (184 mm) | Sound Pressure / Power: 96.6 / 109.6 dB(A) | Air Inlet: 1/4" NPT | Minimum Hose Size: 3/8" (10 mm) | Average Air Consumption: 4.4 CFM (124.6 L/min) | Air Consumption at Load: 22 CFM (623 L/min)

Features:

• Powerful twin-hammer impact mechanism delivers rotational impacts for efficient nut and bolt removal during vehicle repair and equipment servicing.
• 550 ft-lbs maximum torque provides loosening capability for stubborn fasteners commonly encountered in automotive maintenance.
• 9,500 RPM free speed supports fast socket rotation and efficient fastener rundown.
• Multi-position power management system allows output adjustment for different fastening and loosening operations.
• Full-stroke tease throttle provides progressive speed control through the trigger for more controlled fastener engagement.
• Steel hammer case and composite housing help protect internal components against impacts, chemicals, and workshop wear.
• Silenced through-handle exhaust helps direct discharged air away from the operator and working area.
• Compact pistol grip body and 4.2 lb weight provide a practical handheld configuration for repetitive service work.

Applications:

• Automotive repair and tire service – Removing and installing wheel nuts, suspension fasteners, and other suitable vehicle hardware.
• Fleet maintenance – Servicing fasteners on light trucks, commercial vehicles, and fleet equipment within the wrench's torque capability.
• Industrial maintenance and MRO – Loosening bolts on machinery brackets, equipment housings, and mechanical assemblies.
• Mechanical repair workshops – Disassembling equipment, replacing threaded components, and performing routine nut and bolt service.
• Garage and home workshop projects – Supporting vehicle repairs, equipment restoration, and general mechanical fastening with an adequate compressed-air supply.

FAQs:

• Q: How much torque does the Ingersoll Rand 2130 impact wrench deliver?
  A: The manufacturer specifies a maximum torque of 550 ft-lbs (745 Nm) and a working torque range of 50–500 ft-lbs (68–680 Nm). Maximum torque describes the tool's upper rated capability, while the working range is useful when selecting the wrench for typical fastening operations. Neither rating guarantees precise final tightening torque.
• Q: What size air compressor is required for the Ingersoll Rand 2130?
  A: The 2130 consumes 22 CFM at load, with an average air consumption of 4.4 CFM. It uses a 1/4" NPT air inlet and requires at least a 3/8" internal-diameter air hose. Select a compressor capable of providing the necessary airflow at the required operating pressure, accounting for usage frequency and air-line pressure losses.
• Q: What is the difference between the Ingersoll Rand 2130 and 2130-2?
  A: Both models share the manufacturer's 550 ft-lbs maximum torque rating and 9,500 RPM free speed. The standard 2130 measures 7.25" long and weighs 4.2 lbs, while the 2130-2 has an extended-anvil configuration, measures 9.25" long, and weighs approximately 4.6 lbs. Choose the extended model when additional socket reach is necessary.
• Q: Can the Ingersoll Rand 2130 be used to change vehicle tires?
  A: Yes. Ingersoll Rand identifies tire changing and general vehicle repair as primary uses for the 2130 Series. Use compatible impact-rated sockets, and complete final wheel-nut tightening with a calibrated torque wrench according to the vehicle manufacturer's specifications.
• Q: How does the twin-hammer mechanism benefit automotive maintenance?
  A: The twin-hammer mechanism uses two hammers to deliver repeated rotational impacts to the drive. This helps loosen tight fasteners while reducing the continuous torque reaction that a non-impact tool would transmit to the operator. It is particularly useful for repeated bolt removal and installation during mechanical service.

Looking for more information about Ingersoll Rand Impact Wrench? Click here to view the Catalog

For help choosing the correct Ingersoll Rand Impact Wrenches, please call (800) 608-5210 or email info@intlairtool.com