For stainless steel graining, weld-area blending, and restoration work that requires more than a bare finishing tool, the Dynabrade 13460 Dynisher Versatility Kit combines a 1 HP air-powered Dynisher with a selection of finishing and maintenance accessories. The tool operates at 2,800 RPM, providing the slower, controlled abrasive action used to create pronounced linear grain patterns and blend repaired areas into surrounding metal surfaces. This configuration supports fabrication shops, architectural metalworkers, commercial kitchen equipment repair, and maintenance teams working on visible stainless steel components.
The Dynabrade 13460 Versatility Kit is built around the Dynabrade 13450 Dynisher and adds the components needed to begin working with compatible abrasive belts and the included pneumatic wheel. A pneumatic wheel expands slightly when inflated, helping hold the abrasive belt against its flexible surface so it can follow mild contours while producing an in-line finish. The included abrasives allow operators to address multiple stages of surface conditioning, while the supplied lubrication items support routine tool and gear maintenance.
Type: Air-Powered Abrasive Finishing Tool Kit | Model: 13460 | Series: Dynisher | Configuration: Versatility Kit | Motor Power: 1 HP (744 W) | Free Speed: 2,800 RPM | Tool Model: 13450 | Wheel Arbor Diameter: 3/4" (19 mm) | Operating Air Pressure: 90 PSIG (6.2 bar) | Maximum Airflow: 41 SCFM (1,161 L/min) | Minimum Hose I.D.: 3/8" (10 mm) | Air Inlet: 3/8" NPT
Features:
- Versatility Kit combines the Dynabrade 13450 Dynisher with finishing accessories and routine maintenance supplies.
- 1 HP pneumatic motor provides the power needed for sustained abrasive finishing and graining operations.
- 2,800 RPM free speed supports deeper, longer grain patterns on stainless steel and other compatible metals.
- Included Dynacushion pneumatic wheel holds compatible abrasive belts and conforms to mild contours during surface finishing.
- Supports controlled in-line finishing using a back-and-forth motion aligned with the desired grain direction.
- Included abrasive assortment allows the operator to perform multiple stages of cleaning, blending, and surface refinement.
- Supplied grease gun, grease, and gear oil support scheduled lubrication and maintenance of the pneumatic tool.
Kit Includes:
- Dynabrade 13450 Dynisher air-powered abrasive finishing tool.
- Dynabrade 92938 Dynacushion pneumatic wheel.
- Air chuck for inflating the pneumatic wheel.
- Assorted abrasive finishing accessories.
- Grease gun and grease.
- Gear oil.
Applications:
- Stainless steel fabrication — establishing directional grain patterns on panels, enclosures, guards, and fabricated assemblies.
- Commercial kitchen equipment — refinishing sinks, countertops, worktables, backsplashes, and stainless steel appliances.
- Architectural metalwork — blending scratches and restoring consistent finishes on railings, trim, panels, and decorative components.
- Weld finishing — conditioning repaired or welded areas and matching them to the surrounding factory-style grain pattern.
- Industrial maintenance and restoration — renewing worn or damaged surfaces on machinery covers, fixtures, and metal equipment.
FAQs:
- Q: What is the difference between the Dynabrade 13450 and 13460?
A: The 13450 is the Dynisher finishing tool by itself. The 13460 is a Versatility Kit that includes the 13450 tool along with a Dynacushion pneumatic wheel, air chuck, abrasive accessories, and maintenance supplies. - Q: What type of finish does the 13460 Dynisher Kit produce?
A: Its 2,800 RPM tool speed supports a deeper, longer linear grain pattern. The final appearance depends on the abrasive type, grit, contact pressure, and the direction in which the operator moves the tool. - Q: How much air does the Dynisher require?
A: The tool operates at 90 PSIG and has a listed maximum airflow requirement of 41 SCFM. The compressor, regulator, fittings, and minimum 3/8-inch hose must maintain the required airflow and pressure while the tool is operating. - Q: How should the Dynacushion pneumatic wheel be inflated?
A: Inflate the wheel only enough to keep the abrasive belt from slipping during use. Excessive inflation can reduce conformity and may create chatter marks on the finished surface. - Q: Can the included abrasives be replaced when worn?
A: Yes. Replacement abrasives must match the wheel dimensions, mounting method, workpiece material, and required finish. Their maximum operating-speed rating must equal or exceed the tool's 2,800 RPM speed.
Available Variations and Specifications
| Model Number | Motor HP (W) | Motor RPM | Sound Level | Maximum Air Flow SCFM (LPM) | Wheel Arbor Diameter Inch (mm) | Hose I.D. Size Inch (mm) | Air Inlet Thread | Weight Pound (kg) | Length Inch (mm) | Height Inch (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| 13400 | 0.7 (522) | 3,400 | 84 dB(A) | 41 (1,161) | 3/4 (19) | 3/8 (10) | 1/4" NPT | 4.5 (2.0) | 13-1/2 (343) | 9 (229) |
| 13401 | 0.7 (522) | 3,400 | 84 dB(A) | 41 (1,161) | 3/4 (19) | 3/8 (10) | 1/4" NPT | 4.5 (2.0) | 13-1/2 (343) | 9 (229) |
| 13450 | 1 (744) | 2,800 | 80 dB(A) | 41 (1,161) | 3/4 (19) | 3/8 (10) | 3/8" NPT | 5.7 (2.6) | 15 (381) | 7 (180) |
Looking for more information about the Dynabrade Air-Powered Abrasive Belt Tool Kit? For help choosing the correct Dynabrade Tool Kits, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
