Dynabrade 13411 Dynisher Air-Powered Abrasive Finishing Tool Versatility Kit | 0.7 HP Motor | 3,400 RPM

When stainless steel panels, fabricated components, or architectural metalwork require a consistent directional finish, the Dynabrade 13411 Dynisher Versatility Kit provides the tool and accessories needed to begin controlled in-line graining. The included 13401 Dynisher uses a 0.7 HP pneumatic motor and operates at 3,400 RPM, giving fabricators a balanced combination of finishing speed and surface control for blending and refining stainless steel and other compatible metals. Its 7-degree offset configuration positions the abrasive wheel for comfortable access across flat surfaces and near adjoining edges.

The Dynabrade 13411 is the metric Versatility Kit in the Dynisher range. It includes a 94495 Dynacushion pneumatic wheel measuring 90 mm in diameter by 100 mm wide, two abrasive belts, and a 98130 Air Chuck. A Dynacushion wheel is an inflatable finishing wheel that supports an abrasive belt while conforming to mild contours. Variable speed control helps the operator adjust abrasive action to the surface, while the safety-lock lever throttle helps reduce unintended startup. Rear exhaust directs discharged air away from the immediate finishing area. :contentReference[oaicite:0]{index=0}

Type: Air-Powered Abrasive Finishing Tool Kit | Model: 13411 | Series: Dynisher | Configuration: Metric Versatility Kit | Included Tool: 13401 Dynisher | Motor Power: 0.7 HP (522 W) | Free Speed: 3,400 RPM | Tool Style: 7-Degree Offset | Motor Type: Planetary-Geared | Exhaust: Rear | Vacuum Type: Non-Vacuum | Sound Level: 84 dB(A) | Maximum Airflow: 41 SCFM (1,161 L/min) | Wheel Arbor Diameter: 3/4" (19 mm) | Minimum Hose I.D.: 3/8" (10 mm) | Air Inlet: 1/4" NPT | Operating Air Pressure: 90 PSIG (6.2 bar) | Tool Weight: 4.5 lb (2.0 kg) | Tool Length: 13-1/2" (343 mm) | Tool Height: 9" (229 mm) | Tune-Up Kit: 96234

Features:

• Dynisher Versatility Kit produces controlled in-line finishes on stainless steel and other compatible metal surfaces.
• 0.7 HP planetary-geared motor supplies power for blending, graining, and surface-refinement operations.
• 3,400 RPM tool speed supports productive finishing while retaining the control required for directional grain work.
• 7-degree offset tool configuration provides practical abrasive access across panels, fabricated assemblies, and surfaces near adjoining walls.
• Variable speed control lets the operator regulate abrasive action according to the belt, material, and desired finish.
• Safety-lock lever throttle helps reduce accidental activation during handling and accessory changes.
• Rear exhaust directs tool air away from the immediate work surface.

Kit Includes:

• Dynabrade 13401 Dynisher air-powered abrasive finishing tool.
• Dynabrade 94495 Dynacushion pneumatic wheel, 90 mm diameter x 100 mm wide.
• Two abrasive finishing belts.
• Dynabrade 98130 Air Chuck for inflating the pneumatic wheel.

Applications:

• Stainless steel fabrication — creating or restoring directional grain patterns on panels, guards, enclosures, and fabricated assemblies.
• Architectural metalwork — blending scratches and refining railings, trim, wall panels, and decorative stainless components.
• Commercial kitchen equipment — refinishing sinks, worktables, counters, backsplashes, and stainless appliance surfaces.
• Weld finishing — blending repaired areas and matching the surrounding in-line surface pattern after weld leveling.
• Industrial maintenance and restoration — renewing worn finishes on equipment covers, fixtures, and visible metal components.

FAQs:

• Q: What is the difference between the Dynabrade 13401 and 13411?
  A: The 13401 is the metric Dynisher tool by itself. The 13411 is a Versatility Kit that adds the 94495 Dynacushion pneumatic wheel, two abrasive belts, and a 98130 Air Chuck.
• Q: What type of finish does this Dynisher Kit produce?
  A: It is intended for in-line finishing, which leaves a directional scratch or grain pattern on the metal. The final appearance depends on abrasive grade, contact pressure, tool movement, and the existing surface condition.
• Q: What air supply is required?
  A: The included tool operates at 90 PSIG and has a listed maximum airflow of 41 SCFM. Use a compressor, regulator, fittings, and minimum 3/8-inch hose capable of maintaining the required pressure and flow while the tool is running.
• Q: How much should the Dynacushion wheel be inflated?
  A: Inflate the pneumatic wheel only enough to prevent the abrasive belt from slipping. Excessive inflation can reduce conformity and create chatter marks on the finished surface.
• Q: Can replacement abrasive belts be used?
  A: Yes. Replacement belts must fit the 90 mm x 100 mm pneumatic wheel, suit the workpiece material and required finish, and carry a maximum operating-speed rating equal to or greater than 3,400 RPM.

Looking for more information about the Dynabrade Air-Powered Abrasive Belt Tool Kit? Click here to view the Catalog

For help choosing the correct Dynabrade Tool Kits, please call (800) 608-5210 or email info@intlairtool.com