For stainless steel graining, weld blending, and surface restoration where the primary finishing components are needed in one package, the Dynabrade 13410 Dynisher Versatility Kit combines the 13400 Dynisher with a pneumatic finishing wheel and compatible abrasives. The included tool uses a 0.7 HP air motor and operates at 3,400 RPM, providing controlled abrasive action for establishing directional finishes, blending repaired areas, and refining visible metal surfaces. This kit configuration gives fabricators and maintenance professionals a coordinated starting point for in-line finishing work without requiring the primary wheel and initial abrasive accessories to be sourced separately.
The Dynabrade 13410 Versatility Kit is built around the 13400 Dynisher and includes a Dynacushion pneumatic wheel, which is an inflatable wheel that supports an abrasive belt while conforming to mild surface contours. The tool's 3,400 RPM speed supports productive finishing on stainless steel panels, fabricated components, commercial kitchen equipment, and architectural metalwork where grain direction and surface appearance matter. Operators can change compatible abrasive belts according to the starting surface condition and required finish, making the kit useful for progressing through blending, conditioning, and final grain refinement.
Type: Air-Powered Abrasive Finishing Tool Kit | Model: 13410 | Series: Dynisher | Configuration: Versatility Kit | Included Tool: 13400 Dynisher | Motor Power: 0.7 HP | Free Speed: 3,400 RPM
Features:
- Versatility Kit combines the Dynabrade 13400 Dynisher with a pneumatic finishing wheel and abrasive accessories for directional surface finishing.
- 0.7 HP pneumatic motor supplies power for blending, graining, and surface-conditioning operations.
- 3,400 RPM free speed supports controlled abrasive finishing on stainless steel and other compatible metal surfaces.
- Dynacushion pneumatic wheel supports compatible abrasive belts while conforming to mild contours and surface variations.
- Kit configuration provides the primary components needed to begin in-line finishing without purchasing the tool and finishing wheel separately.
- Compatible abrasive belts can be selected according to the workpiece material, existing surface condition, and required grain pattern.
- Air-powered operation supports repeated finishing work when connected to a properly sized compressed-air supply.
Kit Includes:
- Dynabrade 13400 Dynisher air-powered abrasive finishing tool.
- Dynacushion pneumatic finishing wheel.
- Abrasive finishing belts.
- Air chuck for inflating the pneumatic wheel.
Applications:
- Stainless steel fabrication — establishing directional grain patterns and blending surface variations on panels, guards, enclosures, and fabricated assemblies.
- Architectural metal finishing — restoring consistent surface appearance on railings, trim, panels, and decorative stainless steel components.
- Commercial kitchen equipment — refinishing sinks, counters, worktables, backsplashes, and other visible stainless steel surfaces.
- Weld-area blending — conditioning repaired sections after weld leveling and matching the surrounding directional finish.
- Industrial maintenance and restoration — renewing scratched, worn, or refinished metal surfaces on equipment covers, fixtures, and fabricated components.
FAQs:
- Q: What is the difference between the Dynabrade 13400 and 13410?
A: The 13400 is the Dynisher air-powered finishing tool. The 13410 is a Versatility Kit that includes the 13400 tool along with a Dynacushion pneumatic wheel, abrasive belts, and an air chuck. - Q: What type of finishing work can the 13410 Versatility Kit perform?
A: The kit is used for directional graining, surface blending, conditioning, and restoration on compatible metal surfaces. The final appearance depends on the abrasive belt selected, contact pressure, existing surface condition, and direction of tool movement. - Q: Why does the kit use a Dynacushion pneumatic wheel?
A: The inflatable wheel supports the abrasive belt while allowing some conformity to mild contours and surface variations. Inflation pressure can affect belt support and the resulting finish, so the wheel should be inflated only enough to prevent belt slippage. - Q: Can replacement abrasive belts be used with this kit?
A: Yes. Replacement belts must match the dimensions of the included pneumatic wheel, suit the workpiece material and required finish, and carry a maximum operating-speed rating equal to or greater than the tool's 3,400 RPM speed. - Q: What should I check before connecting the Dynisher to an air system?
A: Confirm the manufacturer-specified operating pressure, airflow requirement, air inlet size, and minimum hose diameter for the included 13400 Dynisher. The compressor, regulator, fittings, and hose must maintain the required air supply while the tool is operating.
Available Variations and Specifications
| Model Number | Motor HP (W) | Motor RPM | Sound Level | Maximum Air Flow SCFM (LPM) | Wheel Arbor Diameter Inch (mm) | Hose I.D. Size Inch (mm) | Air Inlet Thread | Weight Pound (kg) | Length Inch (mm) | Height Inch (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| 13400 | 0.7 (522) | 3,400 | 84 dB(A) | 41 (1,161) | 3/4 (19) | 3/8 (10) | 1/4" NPT | 4.5 (2.0) | 13-1/2 (343) | 9 (229) |
| 13401 | 0.7 (522) | 3,400 | 84 dB(A) | 41 (1,161) | 3/4 (19) | 3/8 (10) | 1/4" NPT | 4.5 (2.0) | 13-1/2 (343) | 9 (229) |
| 13450 | 1 (744) | 2,800 | 80 dB(A) | 41 (1,161) | 3/4 (19) | 3/8 (10) | 3/8" NPT | 5.7 (2.6) | 15 (381) | 7 (180) |
Looking for more information about the Dynabrade Air-Powered Abrasive Belt Tool For help choosing the correct Dynabrade Tool Kits, please call (800) 608-5210 or email info@intlairtool.com
warning WARNING: This or other products sold on this website may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
