Dotco 10L1000-36 Inline Grinder | 10-10 Series | 0.3 HP | 30,000 RPM | 1/4" Collet | Aluminum Housing | Front Exhaust

When small parts, die cavities, and machined edges need controlled finishing, the Dotco 10L1000-36 inline grinder delivers compact pneumatic material removal in a straight-body format that fits naturally in toolroom, deburring, and precision fabrication work. Its 10-10 Series platform combines a 0.3 HP motor with 30,000 RPM free speed, giving operators the surface speed needed for carbide burrs and mounted points used on metal cleanup, edge breaking, and detail grinding. The 1/4" collet accepts common industrial rotary accessories, while the front exhaust configuration keeps the rear of the tool clear for hose routing in tight bench or fixture setups.

This model uses a locking lever throttle for lever-style control during longer finishing passes and an aluminum housing that keeps the tool compact without changing the rigid inline feel buyers expect from Dotco material removal tools. At 4.6" overall length, the 10L1000-36 is well suited for deburring holes, blending small contours, cleaning castings, and reaching confined work areas where larger die grinders become difficult to control.

Type: Inline Pneumatic Die Grinder | Series: Dotco 10-10 Series | Model: 10L1000-36 | Power: 0.3 HP / 0.22 kW | Free Speed: 30,000 RPM | Collet Size: 1/4" | Throttle Type: Locking Lever | Housing Material: Aluminum | Exhaust Location: Front | Overall Length: 4.6" / 117 mm | Air Inlet: 1/4" | Minimum Hose I.D.: 1/4" | Rated Air Pressure: 90 PSI / 620 kPa

Features:

• 0.3 HP motor provides controlled power for detail grinding, edge cleanup, and light material removal.
• 30,000 RPM free speed supports high-speed finishing with properly rated carbide burrs and mounted points.
• 1/4" collet accepts widely used industrial rotary accessories for deburring and die/mold work.
• Durable aluminum housing supports repeated shop use while keeping the tool compact for close-control work.
• Straight inline configuration helps operators guide the accessory directly into small features, openings, and contoured surfaces.
• Front exhaust configuration keeps rear hose routing simple in bench, fixture, and tight-space applications.
• Locking lever throttle provides lever-style control during extended finishing passes.
• Standard equipment includes the applicable collet and collet wrenches.

Made in USA:

Applications:

• Die and mold shops — deburring cavities, refining small contours, and cleaning machined details with 1/4" shank rotary accessories.
• Precision fabrication — removing burrs from brackets, slots, holes, tabs, and small welded or machined components.
• Industrial MRO and toolrooms — maintaining fixtures, cleaning castings, and performing controlled touch-up work on repair parts.
• Aerospace and composite-adjacent finishing — small-area cleanup where compact inline control and high accessory speed are required.
• Automotive, motorsport, and garage repair — port cleanup, gasket surface edge work, and light deburring when paired with a properly sized air supply.

FAQs:

• Q: What accessories fit the Dotco 10L1000-36?
  A: This grinder uses a 1/4" collet, so it accepts compatible 1/4" shank carbide burrs, mounted points, and other rotary accessories that are rated for at least 30,000 RPM.
• Q: What does front exhaust mean on this inline grinder?
  A: Front exhaust means the tool exhausts air toward the front of the grinder rather than out the rear. This can help keep the hose area clear, but operators should account for airflow near chips, dust, or lightweight debris at the workpiece.
• Q: What air setup is required?
  A: Cleco rates these tools at 90 PSI / 620 kPa and lists a 1/4" minimum hose I.D. For best performance, use clean, regulated, lubricated air and confirm compressor capacity against your duty cycle.
• Q: Is this a pencil grinder or a die grinder?
  A: The 10L1000-36 is an inline die grinder, not a pencil grinder. It uses a larger 1/4" collet and is suited to deburring and small material-removal work rather than ultra-fine pencil-grinder detailing.
• Q: Does the tool come with burrs or mounted wheels?
  A: No burrs or mounted wheels are specified as included. Manufacturer product information lists the applicable collet and collet wrenches as standard equipment.

Looking for more information about Dotco Grinder Motor? Click here to view the Catalog.

Need help selecting the correct Dotco Grinder Motors for your application? Please call (800) 608-5210 or email info@intlairtool.com